Question about Cars & Trucks

1 Answer

What is the dialing code for 0125

I got a number 01252576422 and I don't know where its from

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 17,970 Answers

Are you asking about OBD code? P0125 fault code?

P0125 OBD-II Trouble Code
Technical Description

Insufficient Coolant Temperature For Closed Loop Fuel Control
What does that mean?

This means that the engine coolant temperature (ECT) sensor indicates that the engine has not reached the required temperature level to enter closed-loop operation within a specified amount of time after starting the engine.
Symptoms

You will likely not notice any drivability problems.

A code P0125 may mean that one or more of the following has happened:
Insufficient warm up time
Low engine coolant level
Leaking or stuck open thermostat
Faulty coolant temperature sensor

Possible Solutions
The simplest thing to do is to reset the code and see if it comes back.

If the code comes back, the problem is likely going to be the result of the above causes (faulty thermostat, faulty ECT sensor, or a low coolant level).

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 14, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5370 Answers

SOURCE: Have a diagram for the

The 25 amp fuse is for radio amplifier.Click this link for fuse and its slot diagram:--- http://howtobyme.blogspot.com/2011/08/fuse-box-diagram-for-2000-jeep-grand.html ---------- This will help.Thanks.Helpmech.

Posted on Aug 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After changing the battery the sound system is locked and I don't know the code number to unlock


so desconect the battery and reset the code.look up the stereo on the internet and find out how too reset it.Have too know mosel # and make.

Mar 28, 2013 | 1998 Saturn SL

1 Answer

Code radio for 5FNRL38877BO11194


You go to the dealer with your VIN# & proof of ownership,
they will help you,write down how to put the code in.

The purpose of the code, is so it won't work in another veh
You don't give out any codes or number on the internet.

May 31, 2012 | 2007 Honda Odyssey Touring

1 Answer

This question is about a lazy-boy recliner not about a car seat. The chair seat should rise to let the person stand. It doesn't.


I don't know what that code means, but on my mom's Lazy Boy, it stopped working and I had to replace the two 9volt backup batteries on the power cube/wall plug.

Apr 25, 2012 | Cars & Trucks

1 Answer

Have 1998 toyota camry LE 3.0 5 cylinder. Has been running rough for about 2 weeks. Check engine light came on. Test said spack issue on cylinder 5, Had this problem once and was coil pack. could it be the...


A fuel filter would not have an effect on one cylinder
& you know how long it was in the car
It could be there 3 to 5 years & be just fine

Don't assume that a code last time that pointed you to a bad
coil will happen that way again.

Codes don't really tell you to change anything
You could have a code for #5 & walk a new coil for 4 cyl's
until you get to # 6 now you found the bad one.

You have several coil packs that feed more than one
plug, you have more to consider

I approach this the way I am, as you most likely
can not test anything, because you lack the proper
equipment ,so you have to do things the hard or longer
way of trial & error. Just don't throw money & parts at
it in doing so

Are the O2 Sensors really old? Over 80,000 miles
Do you have any vacuum leaks including exhaust before
the O2 & converter?

Sep 22, 2011 | 1998 Toyota Camry

1 Answer

Factory code for keyless entry on a 2005 ford freestyle se


You wouldn't really expect the whole world to know
your code would you? Your on the internet,people
know you & want to steal your vehicle

You go to a dealer with your tittle,registration,drivers
licence

They don't just give that to anybody

They will give you the factory code

Why don't you have the card it came on with
the owners manual?

If you got no manual, have the dealer write down
how used the key less entry & how to change the code

Aug 06, 2011 | 2005 Ford Freestyle

1 Answer

I'm having trouble with the evap system and was wanting to know where to start the car is running fine But the light is always on and I was going to check the fuel tank


You really need to study & understand EVAP Systems

You can do that by going to & using YOU TUBE VIDEO

Then you need 3 things

You should have a factory service manual for your vehicle,
to see what the system contains

That is an expensive, but in my world necessary thing to have,
The Helm.Com manuals -- not some parts store or book store generic
useless book

Then a professional scan tool or scan tool software for your laptop
& an EVAP Smoke Machine,are the other two things

You won't have any of the three,so, if you have a code & only
if you can narrow it down to a solenoid that commonly fails I
would say spend the money & take a change on gettin it right

I won't tell anyone that for another six months because codes do not
tell you what is wrong 95% of the time. Not why we get codes
Codes are to tell you a System,only a system has a malfuntion
Then the code number sort of points you in some direction
For the uneducated OBD2 folks & that includes some professional
repair shops,dealers and the like they are lost,from there,without
trouble charts,vehicle data & as I said the correct test equipment
& last the ability to know how to use it. Now that is a subject for
another day you don't even want to know about.

Aug 04, 2011 | 2008 Chevrolet Uplander

1 Answer

How to enter radio code for 1995 bmw525i (after replacing battery)


If you know the 5 digit code you can use the preset buttons for number entry - press the corresponding number on the preset buttons and you should hear a beep if successful.

If you don't know the code, your local BMW dealership can help by giving them the car's VIN number.

May 11, 2011 | BMW 525 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...