Question about Toyota Cars & Trucks

Open Question


Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 150 Answers

SOURCE: 2005 Toyota Sienna rear brake light problem.

have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
Check continuity of live from center to lh & rh lights and/or is there a live at those lights

Posted on May 03, 2009

  • 201 Answers

SOURCE: 1993 toyota landcruiser brake problem

sounds like vacuum brake booster diaphram has failed. its behind master cylinder and probably needs replacing.

Posted on May 08, 2009

  • 1 Answer

SOURCE: 80 series 1991 toyota landcruiser have no interior

I am chasing the exact same problem. I have put it down to no power feed past dome fuse no8 the light gauge wire, blue/yellow trace is under stress behind the heater box and can break internally. I think mine is broken between fuse 8 and inside the car, as there is no continuity between the two points on my vehicle, and there is on my brothers car, same car

Posted on Sep 25, 2009

  • 1 Answer

SOURCE: Timing belt light of Toyota LandCruiser 2006

the reset procedure of the timing belt light is all done by pressing the trip meter button and holding it in whilst the ignition is turned to on then select from the trip button then continue pressing until you come to 15 on trip metre, turn off and then restart. The light should then go off.

Posted on Jan 13, 2010

  • 11 Answers

SOURCE: toyota landcruiser 80 series hand brake not holding

This doesn't help much, but the handbrake on the 80 is shocking to start with!

If a cable has stretched, you can get a replacement set in the UK for about £50 from an aftermarket supplier.

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have removed 2nd row seats from landcruiser 200 series but now SRS warning light comes on which means front air bags and seat tensioners will not work - looking for fix

seat belt switches are open circuit where you have removed the seats this is the posible cause hope this helps as if problem accured after removal of the seats

Aug 14, 2012 | Toyota Cars & Trucks

1 Answer

How to adjust park break 79 series landcruiser 2006

Hello! See the link below with a complete video of "79 series" Landcrusier brake adjustment...The emergency brake adjustment is done (for the most part) at the rear wheels...There is an adjustment nut under the Shift Boot...If you remove the cup holder screw and slide cup holder forward you can gain access to the nut...But this is more of a "fine" adjustment...Follow the steps in the included video...when completed, drive the vehicle a 1/4 mile with the e-brake on...Then release...There should be about 5-6 clicks on the e-brake lever when completed...Guru...Saailer

Oct 01, 2011 | 2006 Toyota Land Cruiser

1 Answer

Where is the location of oil filter toyota landcruiser deisel V8 turbo 200 series

I have a a V8 Tundra.
Driver side front. You may have to remove skid plate.
Also try turning front wheel hard to the left and look behind the left wheel and you see it.

Feb 06, 2011 | 2010 Toyota Land Cruiser

1 Answer

Oil filter location on 2010 Toyota Landcruiser Ute Diesel V8 turbo

I want to change the engine oil in my 200 series cruiser how do I get to the sump plug & filter.

Dec 06, 2010 | 2010 Toyota Land Cruiser

1 Answer

'92 Toyota Landcruiser 80 series- brake light came on in the instrument panel and remains on all the time. Brakes working ok. What's the cure?

You say the brakes work fine, so lets start with the e-brake switch,make sure swith is working and ebrake is all the way off, the next thing is the sensor in the mastercylinder, is the brake fluid low or is the sensor working,with this sensor and the ebrake sensor try unplugging and see if light goes out, start with these things first,also there are no brake fluid leaks on the ground,this would cause the poprotioning valve to turn the light on also,but lets start with the other things first. hope this helps.

Apr 06, 2010 | 1992 Toyota Land Cruiser

1 Answer

91 landcruiser 80 series gxl replacement drivers seat

You can get a replacement seat from a wrecking yard and would guess you would pay around $75.00 to $100.00 for the seat or you could go to a reupholster and have it redone like new for somewhere around $150 to $200.

Oct 05, 2009 | 1991 Toyota Land Cruiser

2 Answers

Rear diff leaking on my toyota landcruiser 75 series trayback

you should have abut 8 or 10 bolts around the rear diff., take those bolts out, remove diff. cover and replace the diff. gasket.. this will fix your problem...

Mar 19, 2009 | 1991 Toyota Land Cruiser

1 Answer

How to change the headlight on a 1991 toyota landcruiser

you should be able to take the light out from the front after removing the grille and headlight surround, this is if it what we call in Australia a "80 series" landcruiser.

Dec 08, 2008 | 1996 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides