Question about 2003 Suzuki Aerio
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the O2 sensor is located just before your catalytic converter. The MAF sensor is located on your air intake pipe just after the filter
Posted on Aug 19, 2009
Funny you should mention that, I’ve been working on the same problem with my 04 Aerio for 2 days. If you've checked the bulb and that didn’t fix it then it's probably 1 of the 5 little resistors on the circuit board. They’re really small and aren’t soldered very well. Pull the clock and pop the white ABS cover off the back, once you remove the clock from the dash you won’t even need any tools to pop the rear cover. Now plug the clock back in (make sure you get the plug back in the right way or you’ll short everything out) then turn your key on and GENTLY push on each resistor with your finger while watching to see if the light flashes on. If it does then that’s the resistor with the bad connection. I say GENTLY because I wasn’t and the lose resistor popped off on mine and no matter how many times I try soldering it back on I cant get a good enough connection to make the light work.
If you do find the lose resister, use a small tipped medium heat soldering iron and fine electrical solder to carefully solder the ends of the resistor with a little solder as possible. What ever you do don’t knock the little thing off or you probably never find it again, and you probably never get it to make a connection again. I’d start with resistor 430, it’s the nearest of the 2 on the side of the plug-in pins on the circuit board. Hope you have better luck then I did…..
Posted on Jan 16, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Apr 25, 2014 | 2003 Suzuki Aerio
Mar 29, 2014 | 2003 Suzuki Aerio
Sep 18, 2011 | 2003 Suzuki Aerio
Mar 13, 2011 | 2003 Suzuki Aerio
Mar 04, 2011 | 2003 Suzuki Aerio
Dec 16, 2010 | 2003 Suzuki Aerio
Aug 04, 2009 | 2003 Suzuki Aerio
Jun 27, 2009 | 2003 Suzuki Aerio
May 08, 2009 | 2003 Suzuki Aerio
791 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: