Question about 1999 Chevrolet Malibu

1 Answer

I have a chevy malibu with a 3.1 v-6 engine I need to know where I can find my cam sensor at will you please help me find it thank you again

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

Hi there:
I suggest to check this diagrams...

I have a chevy malibu with a 3.1 v-6 engine I need - 2_13_2012_5_16_26_pm.gif

Fig. Unplug the sensor harness connector (1) from the CMP sensor-2.4L engine shown

2_13_2012_5_17_02_pm.gif

Fig. Unfasten the retaining bolt, then remove the CMP sensor from the camshaft housing-3.1L engine shown

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Posted on Feb 13, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: SET TIMING ON 2.4 TWIN CAM 1999 MALIBU

bring the piston no 1 on the top position check the cam shaft si moving freelyon the outer side of the shaft there are 2 gear with 14mm bolts and 1 extra whole, put a long bolt in the empty space and try to turnthe engine the bolt will go further in the space than the timming is set put the chain on that should do

Posted on Feb 08, 2009

  • 3640 Answers

SOURCE: 99 Chevy malibu 2.4L engine coolant temp sensor

its at the end of upper radiater hose at housing for thermostat.

Posted on Aug 28, 2009

arauzvictor1
  • 466 Answers

SOURCE: chevy malibu check engine light on code P1665 what

P1665 Evap vent solenoid control circuit

Posted on Aug 30, 2009

tripletauto
  • 1450 Answers

SOURCE: location of water pump on 1998 chevy malibu with

your water pump is driven off of timing chain,it will be on back side of timing cover toward firewall down toward bottom. you have to remove timing cover and chain to replace pump

Posted on Aug 21, 2010

  • 1075 Answers

SOURCE: I want to know where

one of two places.1 top right /left corner of radiator 2 on the main cyclinder head mounted on a main radiator hose.it will have two small wires coming from it.this model changed in 99 so im not sure.adrian,,,

Posted on Sep 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my 2000 chevy malibu sputtering at 2000 R.P.M.s?


it could be a bunch of things, do you have an engine code/Check engine light?

Feb 28, 2015 | 2000 Chevrolet Malibu

1 Answer

2003 Chevy Malibu I need to know exactly where the fuel injectors are located so i can replace them. Please and thank you.


The 2003 Chevy Malibu has a 3.1 L GM 60 V6 engine.
Both of these videos should show you approximately where they are and may also help you replace them.

Jul 09, 2013 | Cars & Trucks

1 Answer

I have a chevy malibu with a 3.1 v-6 engine I need to know where I can find my cam sensor at will you please help me find it thank you again


Hi there:
Check this diagrams...

2_13_2012_5_16_26_pm.gif

Fig. Unplug the sensor harness connector (1) from the CMP sensor-2.4L engine shown

2_13_2012_5_17_02_pm.gif

Fig. Unfasten the retaining bolt, then remove the CMP sensor from the camshaft housing-3.1L engine shown

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 13, 2012 | 1999 Chevrolet Malibu

1 Answer

I have a 1999 chevy malibu i need to know where the cam sensor is at please


Hi there:
Check this diagrams...

2_13_2012_5_16_26_pm.gif

Fig. Unplug the sensor harness connector (1) from the CMP sensor-2.4L engine shown

2_13_2012_5_17_02_pm.gif

Fig. Unfasten the retaining bolt, then remove the CMP sensor from the camshaft housing-3.1L engine shown

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 13, 2012 | 1999 Chevrolet Malibu

1 Answer

I have a 1999 chevy malibu i need to know where the cam sensor is at please


Check this diagrams...

2_13_2012_5_16_26_pm.gif

Fig. Unplug the sensor harness connector (1) from the CMP sensor-2.4L engine shown

2_13_2012_5_17_02_pm.gif

Fig. Unfasten the retaining bolt, then remove the CMP sensor from the camshaft housing-3.1L engine shown

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 13, 2012 | 1999 Chevrolet Malibu

1 Answer

I have a 2003 chevy malibu with 90,000 miles. i took it in for maintenance and the mechanic said that it was showing trouble code p0341. he said it was the cam sensor. yesterday when i went to start it, it...


if the cam sensor is bad, it will definitely not start. The cam shaft position sensor's function is: the engine speed and crankshaft position information is supplied frome a sensor which is usually situated at the front or rear of the crankshaft. note that distributor-located engine speed sensor are generally being replaced with crank shaft-located sensors,as worn disributor drives and associated components can effect the accuracy of the engine speed signal.

A camshaft position sensor,or cylinder identification sensor is used to determin the engine cycle position the information is used to provide individual cylinder ignition and injection cotrol.Many engine mangement systems use an inductive type of sensor that is located near the camshaft;when the camshaft rotates a single signal is passed to the ECU to indicate a reference point in the engine cycle

May 03, 2011 | 2003 Chevrolet Malibu

1 Answer

I need to find out where the camshaft position sensors are located on a 2008 Chevy Malibu LS 4 cylinder. They need to be replaced and i was told that they are fairly easy to do it yourself.


The cam sensor is on the back of the engine, drivers side. On the side of the head, facing the wheel. Just under the rocker arm cover. Only thing on that side. Four bolts to remove it.

Jan 21, 2011 | 2008 Chevrolet Malibu

2 Answers

99 Chevy malibu 2.4L engine coolant temp sensor


its at the end of upper radiater hose at housing for thermostat.

Mar 31, 2009 | 2003 Chevrolet Malibu

2 Answers

2003 chevy malibu that cranks but won't run


If you haven't done so already, have the cam and crank shaft position sensors checked, or replaced, You have replaced everything else.

Jan 27, 2009 | 2003 Chevrolet Malibu

1 Answer

2.2 engine


Hello I have been trying to locate the map sensor on my 2005 chevy malibu with a 2.2 v4 engine and i can ot locate it. please help me

Oct 05, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...