Question about 2000 Pontiac Sunfire

1 Answer

How much is a new cluster for a 2000 pontiac sunfire

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,118 Answers

You can't buy a new one, you will need to send yours out for repair, cost is about $200. Run a google search with these words "2000 Pontiac Instrument Cluster Repair" many sites will come up that can rebuild your cluster to like new.

Posted on Feb 13, 2012

Testimonial: "i went to the garage that works on my car and they said that a new cluster would b about 300"

  • 5 more comments 
  • yadayada
    yadayada Feb 13, 2012

    When I say new I mean one from a GM dealer parts counter. I am sure you are referring to a rebuilt cluster? You can have it fixed for much less than $300, and you get all the latest parts updates installed into the cluster, they all suffer from the same problems of inop guage issues, sticking needles or speeometer problems.

  • cody woods Feb 13, 2012

    yea mine is the odometer light

  • cody woods Feb 13, 2012

    yea mine is the odometer light

  • yadayada
    yadayada Feb 13, 2012

    The light as you call it is cheap to replace, less an $200. It is a one piece LED display

  • cody woods Feb 13, 2012

    they told me that it is the cluster

  • cody woods Feb 13, 2012

    and they said to get it fixed it would b $500 total

  • yadayada
    yadayada Feb 13, 2012

    Someone wants to take you for a ride here.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2000 pontiac sunfire

I had the same problem. Goodwrench looked at my car for 2 hours could not figure it out. Then they unpluged the body control module and plugged it back in and presto, problem solved.

Posted on Nov 27, 2008

fknstart
  • 404 Answers

SOURCE: need to replace the instrument cluster on a 3005 Pontiac Sunfire

mark allwires before unplugging them with paint pen mark the cluster as well just use 1dot 4 globe 1dot 4 globe location 2dots 4other globe or plug eg eg

Posted on Jan 05, 2009

juncro
  • 467 Answers

SOURCE: change headlight in 2000 pontiac sunfire

open the hood and tuen off plastc fastener and remove bulbs

Posted on Jul 16, 2009

bschilz
  • 2049 Answers

SOURCE: What is the paint code for a bright red 2000 pontiac sunfire

Pontiac 2000 Bright Red code is WA8774

Here's a link to the color code chart...
http://www.tcpglobal.com/aclchip.aspx?image=2000-gm-pg06.jpg

Posted on Oct 14, 2009

  • 1146 Answers

SOURCE: Were is the thermostat located in a Pontiac Sunfire 2000?

Hi:
Your thermostat is located under the thermostat housing, which is what the upper radiator hose clamps to on the top of your engine. Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket. tighten to proper torque, reconnect the radiator hose, then refill up the radiator and cooling system.

Posted on Nov 24, 2009

Testimonial: "Thank you, very helpful"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Temp and fuel gauges both peg out pass full & hot


GM had gauge cluster problems from 2000-2005. Bad stepper motors. On those units you have to replace the cluster or rebuild it with new stepper motors. Dealership fixed mine for $150.00

Jan 10, 2011 | 2005 Pontiac Sunfire

1 Answer

How to fix a tachometer on a 2005 pontiac sunfire


The 03-05 Sunfire instrument clusters have a common problem where the stepper motors on the cluster's circuit board will fail causing one or more gauges to go out. It can be repaired though, check out this page for more on how to get it fixed - sunfire tachometer repair

Aug 04, 2010 | 2005 Pontiac Sunfire

1 Answer

My fuses keep blowing in my 2000 sunfire, my dash lights went out and when i replaced the fuse my reverse lights stay on, so i removed the fuse and now my tail lights dont come on,


those have common problems with the cluster panel but before you replace it check under dash for the light that lights up your feet when you enter vehicle they are easily broke and can cause shorts

Feb 18, 2010 | 2000 Pontiac Sunfire

1 Answer

What would cause the temp. guage light and the mileage light to go out? On a 2000Pontiac Sunfire


The bulbs have probably burned out.

Have you rapped on the cluster close to the area where the lights are dead? Sometimes this will fix poor electrical contact.

The instrument clusters usually have to be removed to change out these bulbs.

Oct 10, 2009 | 2000 Pontiac Sunfire

1 Answer

I have a 2000 pontiac sunfire and the odometer light went out. Not sure if there is a fuse for this or i have to replace the instrument panel.


There will be a fuse for you dash lights and they are just light bulbs in the back. Is it just your odometer light that went out or the whole dash cluster? In all likeliness it's probably just the bulb that burned out.

Feb 03, 2009 | 2000 Pontiac Sunfire

1 Answer

Need to replace the instrument cluster on a 3005 Pontiac Sunfire


mark allwires before unplugging them with paint pen mark the cluster as well just use 1dot 4 globe 1dot 4 globe location 2dots 4other globe or plug eg eg

Jan 05, 2009 | 2000 Pontiac Sunfire

2 Answers

2000 pontiac sunfire


You need to get a code reader to see if there is an error.

Sep 24, 2008 | 2000 Pontiac Sunfire

Not finding what you are looking for?
2000 Pontiac Sunfire Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...