Question about 2004 Pontiac Aztek

Open Question

My service vehicle soon light is on and my high beams are flashing

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 76109 Answers

SOURCE: 2002 pontiac grand am service vehicle soon light

Take your car to Kragen or a parts store like it and have the system tested for codes, also ask them to test your charging system for low voltage, all this is free.

Posted on Oct 30, 2008

  • 1608 Answers

SOURCE: Sevice Vehicle Light

The service vehicle is not the same as the service engine light in that the service vehicle light has to do with the body control module,(BCM).You have to get the codes read for the BCM and any other module with the scan tool.I`m not sure if Auto Zone can read the BCM codes.Not all scan tools are able to read all the modules in a vehicle.Hope this helps.Good luck.

Posted on Mar 16, 2010

  • 3600 Answers

SOURCE: service vehicle soon

If you replaced the rotors you may have the wrong rotors, or you may have dirty wheel sensors, it is easy to clean them with a tooth brush and brake clean, try this first. The reason is metal brake dust can collect on the sensor and stop the sensor from producing the 2.5 volts DC as it turns, this would be seen as a fault by the computer as a wheel not turning as fast as the rest of the wheels. Hope this helps if you need more information please let me know. And thanks for using fix-ya.

Posted on Jun 05, 2010

  • 4070 Answers

SOURCE: When I start my 2001

Hi and welcome to FixYa!
As a first course of action I strongly suggest that you remove the positive battery connector of the car and let it sit for atleast 30mins. then reconnect it again to reset the system. If the problem still persist then it's time to take it to the dealership to run a diagnostic.

After diagnostic fault codes will appear then by then we will know what's to be fixed.

Hope this helps and thank you for using FixYa!

Posted on Nov 29, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My low beams work but my high beams wont come on. please help. I live in the country and there are alot of deer and other animaks always crossing the road.TIA

you really need to mention the vehicle make and model , but here goes --if it is a ford product check the light control module as this is where most light problems originate
other makes have the same light control module so check it as well
other than that it could be the light switch
put the lights on low beam and pull the switch handle back to flash the high beams
if they flash the high beam relay is ok --if not it may be the relay
if nothing happens it is most like ly the switch

Oct 26, 2015 | Cars & Trucks

3 Answers

My '93 lexus headlights won't turn on. if I hold the switch to "flash" the high beams, the lights are on, but just to drive at night or during the rain, nothing lights.

Go to your local auto parts store and buy some new ones. They will help you put them in. It sounds like you lost the low beams. When the low beams go out the high beams will still work. It just sounds to me like the bulbs are out. if not they shouldn't charge you for the bulbs.

May 15, 2014 | 1999 Toyota Camry

1 Answer

The high beams will not stay on when the dimmer is actuated. they will light but go off as soon as the lever is released.

When you pull the lever toward you, it is the high beam 'flash' option. To keep the high beams on, push the lever away from you (not up or down).

Jan 27, 2010 | 2003 Saturn VUE

1 Answer

Sarvice engine soon light on high beem light flashing

When you see the high beam light flashing, it means you have a high beam burnt out. It flashes when you put it in gear because your high beams actually double as your daytime running lights, only on a lower power. They're fairly easy to change.

Jul 19, 2009 | 2001 Pontiac Aztek

1 Answer

Right side will not work light glow only

If you have a service vehicle soon light (not service engine soon) this usually indicates a problem with the foreward lamp system.Your problem seems confusing, but check your high beam lamp operation. These cars are NOTORIOUS for corroded harnesses to the headlights. The problem is usually buried behind the washer bottle or across the radiator area. If you are lucky, it may be a burned out high beam bulb. If the blue symbol for brights stays on and there is no click when pulling on high beam lever, you will need a new turn signal switch.

Jun 21, 2009 | 2004 Chevrolet Cavalier

1 Answer

A service light is staying on. its a yellow light with a wrench

That is you service vehicle soon light. It will come on if a exterior light is out or the service engine light doesn't work. Check all you lights and (parking and head lights) and you fluid levels. Check high and low beams and day time running lights.

Apr 12, 2009 | 2003 Saturn L-Series

1 Answer

Daytime Running lights wont come on on my 2000 Grand Am SE.

Do your high beam headlights work? If you have a burnt high beam light the daytime running lights won't work and then the service vehicle soon light comes on.

Mar 22, 2009 | 2001 Pontiac Grand Am SE

1 Answer

2002 Aztek Service engine light on & high beam indicator flashes

The high beam light flashing means you have a high beam burnt out. It flashes when you put it in gear because your high beams actually double as your daytime running lights, only on a lower power.

Dec 17, 2008 | 2002 Pontiac Aztek

3 Answers

Service Vehicle Soon Light for 2001 Pontiac Aztek

what light is flashing with this Service Vehicle Soon message? (Mine had the high beam light flashing and it turned out to be a head light.)

Oct 29, 2008 | 2001 Pontiac Aztek

Not finding what you are looking for?
2004 Pontiac Aztek Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides