Question about Jaguar XJ8
When I try to raise the seat by pressing up on the seat adjuster, there is just a sound. All other positions work fine.
You have a problem with the power seat transmission. The 1st thing to do is make sure that nothing under the seat is impeding the movement of the seat, if that is OK you will need to try and find a used power seat transmission, the parts are not sold separately, just the whole assembly.
Posted on Feb 13, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
to raise you headlights there is a small brass allen screw located above each headlight under the hood. to raise your headlights turn clockwise until they reach the desired level.
Posted on Oct 23, 2008
put a g clamp on it with slight pressure ,then turn it in a bit G clamo goes loose tighten it again and screw it in a bit more and so on--- or have a helper keep pressure on clamp whilst you turn the piston with a pàir of water pump pliers
Posted on Apr 04, 2009
I just had the same problem. When the seat is powered all the forward, one of the worm drives reached the end of its travel and jammed against the threaded block that it passes through. To fix this the seat has to be unbolted and tipped back. There are four tiny 6mm bolts that hold the motor plate in. Remove these and the motor will come out. The worm drive is bolted in at one end and has a set pin at the other. Remove the worm drive and use a couple of vice grips or equivalent to loosen the threaded block from the worm drive.
Posted on Jun 21, 2009
SOURCE: headlight adjustment 1999 S70
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 14, 2009
Tips for a great answer:
Jul 05, 2016 | BMW Cars & Trucks
Apr 21, 2014 | 2006 BMW 318 Ci
Aug 05, 2012 | 2007 Volvo XC90 V8 AWD Sport
Jul 29, 2012 | 2006 Kia Optima
Jun 19, 2012 | 1998 BMW Z3 Roadster
Jul 23, 2011 | Ford Fiesta Cars & Trucks
Jul 29, 2009 | 2006 Hyundai Sonata
Dec 28, 2008 | 2004 Volkswagen Jetta
Oct 11, 2017 | Jaguar S-Type Cars & Trucks
238 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: