Question about Cars & Trucks

Open Question

Roller lifter adjustment 4.3 chevy vortec 1999

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

abauto
  • 353 Answers

SOURCE: roller lifter adjustment 5.7 chevy vortec 1999

Crank the engine until the mark on the damper aligns with the TDC mark on the timing tab and the engine is in #1 firing position.

To adjust a valve back off the adjusting nut until lash is felt at the pushrod. Tighten the nut until all lash is removed. This can be determined by rotating the pushrods with your fngers. When all lash is removed the pushrod will stop rotating. When all play is removed rotate the nut one full turn.

With the engine in #1 firing position the following valves can be adjusted:
Exhaust 1,3,4,8
Intake 1,2,5,7

Crank engine one full revolution - The following valves can now be adjusted:
Exhaust 2,5,6,7
Intake 3,4,6,8

Posted on Jul 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My s-10 2.2 4 cyl 1997 i ticking and I need to adjust the valve clearence. WHat should the valve clearence be on my car?


s10 2.2 4 cyl looks like hydraulic roller lifters fitted

this is the lifter part listed for the motor ..set of 8


ticking will be worn or hammered lifters or poor oil flow pressure to the lifters

26230544-25i5sdpaelbjvywl3um3inh2-5-0.jpg

Jul 03, 2016 | 1997 Chevrolet S-10 Pickup

2 Answers

My engine has intermittent lifter rattling what could be the problem


Chevy Vortec lifter & valve tap how to repair it - YouTube

? 10:08
https://www.youtube.com/watch?v=KPAMIeeY-q8
May 22, 2012 - Uploaded by AdirondackNY
this video has info on how to fix a severe valve tap or sticky lifterusing 1 quart of ... Chevy 5.3 liter lifter noise and motor flush solution How to ...

4.3 engine knock lifter or bearing? - YouTube

? 1:22
https://www.youtube.com/watch?v=oSbyAbS6e2c
May 27, 2010 - Uploaded by jerjer0241
any idea weather its a rod bearing or a lifter or even summin else? the service engine light is on because i have the air intake off. Just did an oil change ... ... Up next. Engine Knocking or Ticking?!? This Could Be Your "FIX" ...

Ticking Noise From Valve Lash Adjusters Due to Infrequent ...

repairpal.com > Problems > Mazda > Mazda6


Jan 19, 2016 | Cars & Trucks

1 Answer

Are the lifters on 1999 v6 vortec adjustable?


Hi there I am technical mechanical and electronic engineer mechanic no replace them are you sure thats the problem is?????

Oct 25, 2015 | Cars & Trucks

1 Answer

Motor knock sounds like rocker arms or lifters?


If your engine is knocking the sound with be at the bottom of your oil pan but if you have lifter or rocker arm problems the sound will be at the top of your engine. One other thing you said your car has 315k it might be time to change your oil pump.

Mar 25, 2013 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

Lifter tapping 98 v6 chevy vortec


you should be a Mechanic to fix. it,s not that heard.just remove valve cover.

Feb 15, 2012 | Cars & Trucks

2 Answers

Firing order diagram for 1999 chevy 350 5.7 vortec engine


For the 1999 Chevrolet WITH 5.7L V8:

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
.........(back).........
'...8...'........'...7...'
'...6...'........'...5...'
'...4...'........'...3...'
'...2...'........'...1...'
.........(front)

Distributor Connections:
............(back)
Coil--->o
6------->o........o
4------->o........o
2------->o........o
8------->o........o
.............(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!

Oct 04, 2010 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

What is the correct way to adjust the valves on a 98 305 vortec/roller lifters


Go buy a repair manual at parts store for the vehicle and it will tell exactly what you need it is a little hard to describe over the computer. The procedure is not hard and the same for each cylinder but you have to rotate engine like four times as you can get 2 cylinders at a time.

Apr 14, 2010 | 1998 GMC Savana

1 Answer

How do you tell good lifter from bad lifters in 97 Chevy Vortec 350


Most of the vortecs that i have worked on have hydraulic roller lifters, but i cant say for certain that your engine does, however i am sure that it has hydraulic lifters and they can be checked by trying to push them down in the center where the pushrods contact, if they compress easily the lifter is bad, If they are roller lifters, check for any wear on the roller and how well they turn, it is ok to have some side to side movement on the pin but any up/down movement on the roller is bad. If the are non-roller lifters check for wear, if the lifter looks "dished" or "concaved" rather than having flat surface replace the lifter.

Jan 23, 2010 | 1997 Chevrolet C1500

3 Answers

Do the valves need periodic adjustments in a 1999 Chevy suburban and how many valves per cylinder


The valves never need adjusted, .Do to hydraulic lifters and zero clearance.The rocker arms are torqued to 35 ftlbs.So you never have to worry about it.If there is a noise have your lifters checked:)

Aug 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Roller lifter adjustment 5.7 chevy vortec 1999


Crank the engine until the mark on the damper aligns with the TDC mark on the timing tab and the engine is in #1 firing position.

To adjust a valve back off the adjusting nut until lash is felt at the pushrod. Tighten the nut until all lash is removed. This can be determined by rotating the pushrods with your fngers. When all lash is removed the pushrod will stop rotating. When all play is removed rotate the nut one full turn.

With the engine in #1 firing position the following valves can be adjusted:
Exhaust 1,3,4,8
Intake 1,2,5,7

Crank engine one full revolution - The following valves can now be adjusted:
Exhaust 2,5,6,7
Intake 3,4,6,8

Apr 14, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...