Question about Cars & Trucks

Open Question

Hyundia excel 1998 twin cam timing marks - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: Correct way to align timing marks

hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

Posted on May 28, 2009

stevenhurc
  • 450 Answers

SOURCE: Looking for cambelt timing marks/ positions please, Twin cam engine Thanks Kevin

these bend valves if belt breaks while running
Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
Align the mark on the crankshaft gear with the
notch at the bottom of the rear timing belt cover.

Posted on Jun 29, 2009

jturcotte
  • 8215 Answers

SOURCE: timing belt diagram 92 hyundia lantra 16v

from autozone.com

b9d4322.gif6f4a506.gif

Posted on Oct 25, 2010

ghost45
  • 1280 Answers

SOURCE: Just put new timeing belt

Take it in to an authorized Hyundai Service Department... they'll let you know the FIX

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install timing chain with timing marks both crankshaft and camshaft


Hellen, For the second time, Re POST year, make, model, engine size and complete question so we, here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Still pulling hair Twin Cam timing marks How accurate Engine Exhaust...
16v fast tbelt swap
Twin cam 16 valve timing marks Google Search

Aug 11, 2016 | Cars & Trucks

1 Answer

Where can i find a diagram with upper an lower timing marks for a 1998 nissan single row twin cam 16 valve


Hi,why dont you buy a haynes manuel it will give the marks and help with eney future problems that might arise,all the best.

Sep 15, 2015 | Nissan Cars & Trucks

1 Answer

I have 1998 hyundai excel twin cam l have just put cams out of 1999 excel and it sound like it has a lumpy cam now at lidle.Now my car smells like unburnt fuel.can this be from cam not being in right at...


double check all youre timing marks . loosten tentioner and adjust cam.then tighten chain .manually turn motor over twice then check timing marks again this is a little tricky sometimes because when you tighten the tentioner the cam will move. you have to have the chain in a spot to compensate for this movement.

Dec 02, 2013 | Cars & Trucks

1 Answer

Replacing timing belt; need timing belt markings for 2000 mazda protege


If it has the twin camshafts, then you need to align the bottom crankshaft pulley marking (there's only one marking at top dead centre). Then you'll need to align the two camshaft pulleys. You need to use the first two sets of markings and then double check the markings on the camshafts themselves, within the valve cover area. Always double check the crank shaft sensor is aligned properly on re-assembly as misalignment will result in a non-start and you might doubt your own work. Don't worry about timing belt failure or misalignment on the twin cam engine as this is a "safe-engine" and will not result in any damage.

Oct 30, 2012 | 1998 Mercedes-Benz CLK

1 Answer

How to replace a broken timing belt for a 1998 daewoo lanos?? Would there be any head damage?


yes it is quite possible that valves are bent if the cam belt broke or teeth stripped off of old belt, which unfortuneately means removing the cylinder head and getting it repaired (valves replaced and possibly guides) see some of my other posts for cam belt timming marks locations etc...
depending what motor is in your vehicle twin cam or single?

stevenhurc_14.jpg and if its twin cam you usually need cam locking tool for cam gears.

Apr 20, 2011 | Daewoo Lanos Cars & Trucks

1 Answer

Need to check the timming on a 98 grand am 2.4L twin cam


by check timing do you mean base ignition timing or cam timing ,base ig. timing is handled by pcm not adjustable cam timing can be checked by removing all necessary components to gain access and remove timing belt covers rotate engine till #1 cylinder is @ tdc on compression stroke and check to see if all timing marks line up

Mar 16, 2010 | 1998 Pontiac Grand Am

1 Answer

1995 hyundia excel timing aliment marks


GET THE CRANK TIMING MARK ON 0 DEGREES AND THE CAM GEAR SHOULD HAVE A MARK USUALY A DOT THAT LINES UP WITH 12 OCLOCK

Aug 31, 2009 | 1994 Hyundai Excel

1 Answer

Correct way to align timing marks


hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

May 11, 2009 | 1994 Hyundai Excel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...