Question about 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Gas gage points down not on the spot to full

All of a sudden my gas gage quit working properly and points down.the vehicle is a 1500 silerado ext cab 2004 v8

Posted by on

  • 1 more comment 
  • 2n29SccerDad Nov 25, 2008

    I have an 04 Yukon XL with the same problem. When I first start the engine, the gauge does it's "calibration thing" but doesn't go back to "empty" to start the calibration. So each time I restart, the needle moves further clockwise.



    The sending unit is still sending a good signal (my mileage range is where it should be) just the needle is pointing the wrong direction.



    This just happened with the onset of cold temperatures & I wonder if the gauge got stuck which threw the calibration off?





  • Anonymous Jan 28, 2009

    gas gauge is not working

  • Tom Morris Jr Oct 18, 2012

    I have 04 2500 with same problem. needle has almost made a 360 back to empty mark. getting frustrated nobody can tell me if it is gauge or sending unit . my problem happened after I had fueled up.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Might be a bad ground some where

Posted on Oct 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Chevy s15 Rpm and Gas Gauge is not working


I didn't see an s15 in that model year, in my database?
If the speedometer works but the tach doesn't, I think something is wrong with instrument cluster?
GM has had a problem with fuel gage sending units. The sending units are not hard wired to instrument cluster, they send signal to pcm, the pcm sends serial data to instrument cluster, telling the cluster the gage settings.
It may be possible to use different size resistors in place of the fuel level sending unit, to see if fuel gage reacts properly to different resistors, if the gage reacts properly, then I think the problem is the fuel gage sending unit.

Nov 02, 2016 | Chevrolet Cars & Trucks

1 Answer

Is there more than 1 drain on the AC 2001 gnc Sierra 1500 ext cab


No. Unless it gets to full. It will drain inside the cab.

Sep 17, 2016 | GMC Sierra 1500 Cars & Trucks

1 Answer

1997 5.7l V8 ext. cab. How can I replace ignition switch?


You will need to take the steering column apart to replace the switches. You will need specific tools to do it also.
Check this link:
1997 Chevy truck ignition switch replacement

Feb 04, 2016 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

1997 Dodge Ram 1500 is losing oil pressure, stalling at idle, and sudden stops. Have replaced oil, plugs, and recently had a new muffler from the manafold back installed. Truck will be running fine at some...


clean or replace idle air control valve located on the throttle body, this is the valve that adjusts the ammount of air allowed into the engine to adjust fuel mixture. If you change it clean the throttle plate of all the carbon build up

Nov 02, 2010 | 1997 Dodge Ram 1500 Club Cab

2 Answers

I have a 1991 chevy 1500 ext cab with a 350 motor


Check engine light on? Does it run normal driving it? Sounds like a vacuum leak. Check the gasket under the throttle body.

Jun 05, 2010 | 1991 Chevrolet C1500

1 Answer

Chevy silerado 1500 350 v-8 where do


On the low pressure side of your system. The high pressure is by the battery on the aluminum tube hooked up to the radiator. Not that one!! But the other aluminum tube hooked up to your firewall going into the cab. Both of em looks alike. Is a quick coupler fitting with a black cap on it.

May 06, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

2001 chevy silverado 4.8 gas gauge not working properly


Fairly common problem with GM vehicles. The sending unit in your tank has a small circuit board that an arm is attached to which moves up and down according to your fuel level. This circuit board and arm are not making good contact. Unfortunately the only good solution is to replace this part.

Oct 28, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Fuel gage


theres a float inside the gas tank,check to see if that is attached properly

Oct 06, 2009 | 2000 Ford F350 Super Duty Super Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

67757 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...