Question about Cars & Trucks

1 Answer

Scania 144 530 tappet settings.

Looking to find out how to set the tappets on scania 144 530

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need guid to set scania engine dc16 45a 1066579 tappets

Posted on Dec 13, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: tappet/valve settings???

o.25mm when hot this is for inlet and outlet

Posted on Feb 11, 2009

  • 653 Answers

SOURCE: Engine tappet clearances

According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!

Posted on Mar 01, 2009

  • 50 Answers

SOURCE: what is the tappet settings for suzuki f5 engine

ae92 engine intake 0.15-0.25mm ex 0.20-0.30mm

Posted on May 31, 2009

madadam1965
  • 79 Answers

SOURCE: TAPPET SETTINGS HONDA PRELUDE 2.2 IMPORT

Intake valve clearance 0.15mm-0.19mm (6-7 thou); Exhaust clearance 0.17mm-0.21mm (7-8 thou). All measurments COLD engine. 2.2 VTEC Prelude engine 1992-1996, import and UK.

Posted on Sep 07, 2009

  • 608 Answers

SOURCE: how to measure tappet clearance with dial gauge

When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet settings on a 1200 toyota corolla 1980 model bakkie


It will be the same as for the 1200 on any other Toyota, i.e. Pulsar etc. If you have 10 thou on the intake and 13 thou on the exhaust set while hot, you are withing range.
We used to say a ticking tappet is a happy tappet, so don't try to eliminate all noise from the tappets, just set them so they don't kill all conversation in the cab.

Apr 03, 2015 | 1980 Toyota Corolla

1 Answer

Tappet settings for 1980 Hino am100


go on the net or contact your local service dealer, but for most diesels that do not hydraulic tappets the setting standard is .012" inlet hot and .014" exhaust hot. Make sure that the setting is required as tappet noise can be from work rocker bushes and shafts

Oct 01, 2014 | Cars & Trucks

2 Answers

Tappets


0.20mm inlet (engine warm)
0.20mm exhaust (warm)

Apr 13, 2014 | 2003 Renault Kangoo

1 Answer

Kia carens problems


Tappets......... perhaps is what your friend said. The tappets are part of the engine inlet and exhaust valve set up. Most tappets are self adjusting in modern motors, (Hydraulic).
The old fashioned tappets are manually adjusted during regular car servicing. This happens at set intervals, for instance every 20,000 miles.
Inlet valves allow air and fuel into the engine and exhaust valves let the burnt fuel and air out.
Tappets are fitted between the inlet and exhaust valves, they ensure that the valves open on time and more importantly close properly. If the tappet happened to be badly adjusted and did not let the valve close properly then damage to the valve and cylinder head can happen by burning.
If you have a significant power loss I would be surprised to find that the just tappets/valves were to blame.

Jan 26, 2014 | Cars & Trucks

1 Answer

How to measure tappet clearance with dial gauge


When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Mar 25, 2010 | 1988 Mitsubishi Cargo

1 Answer

Tappet settings


Industrial diesel engine?

May 24, 2009 | 1994 Isuzu Trooper

3 Answers

Tappet/valve settings???


o.25mm when hot this is for inlet and outlet

Jul 28, 2008 | 1988 Mitsubishi Pickup

1 Answer

Tappet settings


for that application best to go to Chilton hand book to find. O'reillys Auto parts and Autozone can look it up for you and give you the specifications by phone.

May 27, 2008 | Mitsubishi Colt Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

656 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...