Question about Cars & Trucks

Open Question

How to reprogram at new ignition key switch honda prelude 98

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: need to reset the ignition key code for a 1998 honda prelude

reset security light: Place key in ignition, (do no start) leave in ON position for exactly 10 minutes. As SOON as the security light

Posted on Nov 29, 2011

  • 75222 Answers

SOURCE: how to reprogram a new key honda prelude 98

The new key must be programmed using special procedures you can't do at home, you must alos have at least one working transponder key or the module must be replaced, about a $600 part.

Posted on Feb 09, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is my 97 honda prelude always blowing hot air at my feet even when the air is off

HONDA EXPERTS accord vents dont switch anymore? ' Yahoo Answers 13, 2008 - my 1994 honda accord ex has a problem. the heater vents dont switch ... defroster and feet etc.. none of those work anymore. nether does my AC, ... still no change. they will blow hot and cold air out of the front "in your face" ...

Honda Prelude - A/C delete - YouTube

? 7:41
Jul 30, 2013 - Uploaded by Nicolas Alvarez
Honda 98 prelude 5th gen A/C delete H22A New belt size = 37 inches (same as 97 accord) ... New belt size = 37 inches (same as 97 accord) ... How to: 1990 Honda Prelude - Diagnosis Air Conditioning Inop and a Vacuum leak ... Fixing A Car Air Conditioner That Blows Hot Air - Duration: 3:42. by Scotty ...

Sep 25, 2015 | Honda Cars & Trucks

1 Answer

How do you change an ignition switch on a 1999 Honda crv

On my Honda Accord of same year, Changing ignition switch requires to reprogram the ECU unit. To overcoming the reprogramming i taped old key to existing switch. Install the new switch. The downside is the vehicle security.

Jan 03, 2015 | Honda CRV Cars & Trucks

1 Answer

Key reprogramming

The problem is you need to use OE ( original equipment )
Honda made their cars so that you need to buy from them not a wrecker...The ignition feeds to the computer, So using a screw driver will make life worse...The ignition cylinder is similer to what"s in your front door...

Nov 24, 2013 | 1996 Honda Civic

1 Answer

2005 honda civic ex, replaced ignition with used ignition. had new igntion key reprogrammed to car. reprogramming of key(s) successful. green key light will not go off with reprogrammed key and car will...

Even with the reprogrammed key's the engine would crank, it might not start but it would crank over so that leave's only one thing, your used ignition switch is bad.

Nov 24, 2013 | 1996 Honda Civic

1 Answer

How to reprogram a new key honda prelude 98

The new key must be programmed using special procedures you can't do at home, you must alos have at least one working transponder key or the module must be replaced, about a $600 part.

Feb 09, 2012 | Honda Cars & Trucks

1 Answer

Hi i own a 1991 Honda prelude, automatic. I'm having problems with the ignition. The key goes in by wont turn, unless i jiggle it around. Any advice would be great thanks?

Get another key made, sounds like your key is either a new cut that is slightly out of alignment or it is an old key that is worn. If that doesn't fix it then you may need a new ignition column (tumbler). Try your key(s) on your door locks and your trunk lock to see if the same problem exists.

May 31, 2010 | 1991 Honda Prelude

2 Answers

All electronic accessories work when key is in

test power at the starter's power wire. If there is voltage, replace starter. If there is no power, check fuses/relays, if those are fine, check ignition switch (there is a recall on this since 2002). Typical symtoms of ignition switch failure on these vehicles include: Some warning lights not lit when key is turned to ON (ABS, battery, check engine, oil light etc.), Intermitted hard start/No start, stalling while driving, intermitted guage failure. If it is an ignition switch failure, call your local honda dealer for possible free repair under the recall(have your VIN# at hand). hopefully this helps

Sep 11, 2009 | 1998 Honda Prelude

1 Answer

My 90 prelude won't turn off/ has new ign. Cylinder and switch.

ignition switch is adjusted wrong loosen the bolts slide it away from stering wheel. if you still have problem make sure the rod for switch is moving freely with switch.if not that check to make sure you have right switch,if correct sound like you have some damaged wires.

Aug 05, 2009 | 1995 Honda Prelude

1 Answer


The ignition key cylinder and ignition switch are two different parts. Which one did you change? Your problem is the ignition switch not the key cylinder if that's what you changed.

Dec 30, 2008 | 1994 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides