Question about Honda Element

1 Answer

Tpms light came on, dic indicated low tire pressure, filled tire, light still stays on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check yours owner's m on how to reset your tpms every time you have flat or low air in the tire you have reset after repairing it.

Posted on Feb 13, 2012

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 375 Answers

SOURCE: Hyundai Veracruz GLS 2008 Tire Pressure problem

Keep taking it back to the dealer until the fix it or give you a new car. Not that it's an immediate safety issue, it's just something that's supposed to be functioning properly. They have to address it because cars are legally required to have TPMS systems for safety. If a safety mehanism fails in your car, you can claim it is a safety issue. If you keep having problems with the TPMS light, you'll eventually ignore it. Then one day you'll have a tire going flat and you wouldn't know it.

Posted on May 18, 2008

  • 7 Answers

SOURCE: TPMS on 2006 Chevy Impala

I have an 05 impala and there is a setting in the Radio to reset the oil life and TPMS system, I'd look in the owners manual to see how to access this feature on the 06 but it should be there.

Posted on Oct 03, 2008

  • 1 Answer

SOURCE: resetting TPMS (Tire Pressure Monitoring System)

http://forum.chryslerminivan.net/printthread.php?t=113 visit yhis site it may help you

Posted on Oct 23, 2008

  • 416 Answers

SOURCE: Extreme cold weather has caused my tire pressure

my reset after driving for a bit if not check owner book

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Lexus ES 350 low tire pressure warning light


1) go to a gas station with an air pump. Unless u have an inflator/compressor at home with the tireattachment

2) lower all 5 air pressures including the spare in the trunk to maybe about 28 PSI

3) now reset the TPMS (on the 07 there is a button to "calibrate" the TPMS and it is located under the dash. I presume it is the same on the 08.)

4) now bring the pressue back up to 30/32 or whatever it says on the door area


If this doesn't work, it is possible u have a defective TPMS
but my bet right now would be that someone "calibrated" the TPMS to the current tire pressure so the light is constantly on. It happened to me before when my daughter was messing around and hit that button.

Oct 03, 2016 | 2008 Lexus ES 350

1 Answer

The tire light flashes then stays on 2011 Dodge Grand Caravan What could that mean?


Diane, it is sensing low air pressure in one of the tires, or faulty sensor. check air pressure in tire and fill to specification.
Check the attached links for more info,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Why Is My TPMS Light Flashing It Could Be Time for New Sensor Kal Tire

Dodge Chrysler Jeep Fiat TPMS Tire Pressure Monitoring System Relearn...

http://forum.chryslerminivan.net/showthread.php/15281-Tire-Inflate-Light-Comes-on

Tire Pressure Warning Light

Mar 12, 2016 | 2011 Dodge Grand Caravan

1 Answer

Tire pressure light is staying on in instrument panel. checked tire pressures. all correct


There are two typical types of tire pressure monitoring systems, direct and indirect. Direct TPMS uses individual battery powered sensors on each wheel to report tire pressure to the computer and if this is the case one of your sensors may have failed. Indirect TPMS uses a combination of values measured externally to each wheel (rotation velocity, temperature, etc.) then the computer calculates nominal values and indicates when a wheel is performing outside those nominal values thus indicating a potential low tire pressure situation. Any false indications with an indirect TPMS may be due to a fault within the ECU (computer) or other feedback sensor.

Dec 31, 2014 | 2007 Toyota Sequoia Limited

1 Answer

Engine power reduced appeared on the DIC of 2008 chevy cobalt


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS, MIL, CEL and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System, MIL Malfunction Indicator Lamp, CEL Check Engine Light.

Nov 15, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

My Tpms stay on all the times my tire are fine so what is the problem?


Cluster warning lights

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Oct 30, 2012 | Cars & Trucks

1 Answer

Tpms light on, dic indicated low tp fr, inflated to proper pressure,tpms stays on, dic wont update


TPMS - TIRE PRESSURE MONITOR WARNING LIGHT
NOTE: Tire pressure rises and falls depending on heat caused by vehicle's operation and the outside temperature. If outside temperature is low, the air inside the tire may cool, causing a lower tire inflation pressure. This may cause the low tire pressure warning light to illuminate.

When the tire pressure warning light comes on, immediately check the air pressure of all tires and adjust to the specified pressure. Make sure the warning light goes off. If the warning light stays on or flashes, there is a malfunction in the TPM system. See appropriate manufacturer service information.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 13, 2012 | Cars & Trucks

2 Answers

Tire pressure light does not go off. how do i reset? also on the hatchback lift the button doesn't work. i can remove the inside cover and manually open it by manually sliding the switch. how do i...


All you have to do to reset the TPMS light is make sure all your tires are set around 35-38 psi then drive it a a couple miles and the light will turn off. If it is blinking then you have a sensor issue and you will have to take it to the dealer. The tire pressure warning light is yellow not red."Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow"

Jun 23, 2011 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Tpms light is on have a 2008 kia sportage


TPMS is the tire pressure monitoring system. This is usually because one of your tires is low.
Here is what KIA says about it:
Once the low pressure tire is reinflamed to the recommended pressure and installed on the vehicle, the TPMS malfunction indicator and the low tire pressure telltale will be extinguished. If the low pressure and TPMS malfunction indicators are not extinguished after about 20 minutes of continuos driving, please visit an authorized KIA Dealer.

If you have to bring it to the dealer, they will most likely have to replace one of the tire pressure sensors.

Thanks for asking and good luck!

Dec 22, 2010 | 2007 Kia Spectra LX Sedan

1 Answer

Service tire monitor on what is the problem? how do you reset the system?


TIRE PRESSURE MONITOR SYSTEM
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. If your vehicle has this feature, sensors are mounted on each tire and wheel assembly, except the spare tire. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle.

The TPMS is designed to alert the driver, if a low tire pressure condition exists. This system also allows the driver to check tire pressure levels using the Driver Information Center (DIC).

When a low tire pressure condition is detected, the TPMS displays the "CHECK TIRE PRESSURE" warning message on the DIC, and at the same time illuminates the low tire pressure warning symbol.

You may notice, during cooler weather conditions, that the tire pressure monitor light, located on the instrument panel cluster, and the "CHECK TIRE PRESSURE" message will appear when the vehicle is first started and then turn off as you start to drive the vehicle. This could be an early indicator that the tire pressures are getting low and need to be inflated to the proper pressure.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

The "CHECK TIRE PRESSURE" warning message and low tire pressure light (telltale) will appear at each ignition cycle until the tires are inflated to the correct inflation pressure.

The Tire and Loading Information label (tire information placard) shows the size of your vehicle's original tires and the correct inflation pressure for your vehicle's tires when they are cold.

Your vehicle's TPMS can alert you about a low tire pressure condition but it does not replace normal tire maintenance.

NOTICE: Do not use a tire sealant if your vehicle has Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors.

RESETTING THE TPMS IDENTIFICATION CODES
Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. Each tire/wheel position is matched to a sensor, by increasing or decreasing the tire's air pressure. The sensors are matched to the tire/wheel positions in the following order: LF TIRE (left front tire on the driver's side of the vehicle), RF TIRE (right front tire on the passengers side of the vehicle), RR TIRE (right rear tire on the passengers side of the vehicle), and LR TIRE (left rear tire on the driver's side of the vehicle).

You will have one minute to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer than one minute, to match the first tire and wheel, or more than five minutes to match all four tire and wheel positions the matching process stops and you will need to start over.

The TPMS sensor matching process is outlined below:
  1. Set the parking brake.
  2. Turn the ignition switch to "RUN" with the engine off.
  3. Turn the headlamp switch from "OFF" to the parking lamps setting four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light will begin to flash. The double horn chirp and flashing TPMS warning light indicate that the TPMS matching process has started. The TPMS warning light should continue flashing throughout the matching procedure. The "SERVICE TIRE MONITOR" message will be displayed on the Driver Information Center (DIC).
  4. Start with the driver's side front tire.
  5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. If you do not hear the confirming single horn chirp, you will need to start over with Step 1. To let air-pressure out of a tire you can use the pointed end of the valve cap, a pencil-style air pressure gage or a key.
  6. Proceed to the passenger's side front tire, and repeat the procedure in Step 5.
  7. Proceed to the passenger's side rear tire, and repeat the procedure in Step 5.
  8. Proceed to the driver's side rear tire, and repeat the procedure in Step 5.
  9. After hearing the confirming horn chirp for the left rear tire, check to see if the TPMS warning light is still flashing. If it is, turn the ignition switch to LOCK to exit the sensor matching process. If the TPMS warning light is not flashing, the five minute time limit has passed and you will need to start the process over beginning with Step 1.
  10. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.
  11. Put the valve caps back on the valve stems. The spare tire does not have a TPMS sensor. If you replace one of the road tires with the spare, the "CHECK TIRE PRESSURE" message will be displayed on the DIC screen. This message should go off once you re-install the road tire containing the TPMS sensor. The "SERVICE TIRE MONITOR" message is displayed when the TPMS is malfunctioning. One or more missing or inoperable TPMS sensors will cause the service tire monitor message to be displayed.

Nov 23, 2010 | 2006 GMC Yukon

2 Answers

TIRE PRESSURE LIGHT STAYING ON


You either have low tire pressure in a tire
A bad tire pressure sensor in a wheel
Or just need to reset the TPMS,if you rotated your tires.

Go to a shop with a TPMS tool or scanner with TPMS software, and have it reset.

Aug 02, 2010 | 2007 Nissan Sentra 2.0 SL Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...