Question about 1999 Plymouth Voyager

2 Answers

Cruse control not working

Cruse control in on the steering wheel when pressed the cruse light comes on but wont engage the cruse crontrol

Posted by on

  • Anonymous Mar 13, 2014

    cruse control wont work

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 40 Answers

Another thing you might want to look into is the Chrysler Recall for the Clockspring in the steering column that can cause problems with the Cruise Control, Horn, and Airbag circuits.

Posted on Jan 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Check the air control hoses for the cruise control.

Posted on Nov 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Airbag light comes on and stays on what can i do on a very fixed budget no money for car repairs now would like to fix on my own but how


Hi Greg there are several possible causes. The connections under the seat. The air bag squib under the stering wheel the control units. First you need it pluged in to find out which one. Then you can discied where to go from there. Regards Jim...

May 09, 2015 | 2000 Hyundai Elantra

1 Answer

Where is the horn brush and slip ring on a 1996 suburban. After a new multifunction switch was replaced the horn won't work.


Under the steering wheel. If the clock spring is broken the horn wont blow, the cruse wont work and the air bag light stays on.

Oct 17, 2014 | Cars & Trucks

1 Answer

Cruise control not working on 97 lincoln towncar V8 what to check for


if your car has eltronic crusie crontrol and your set buttons are on the steering wheel take test light and see if you are getting power to control module under the hood if you are getting power your module is prob. bad if not you more than likely have a bad switch. hope this helps

Dec 14, 2012 | Cars & Trucks

1 Answer

Horn and cruise control not working


I had the same symptom on my 97' grand voyager. replaced the clock spring and my air bag light turned off, the horn worked and the cruse worked. found one at local auto parts for about 50 bucks.

Aug 06, 2012 | 1999 Plymouth Grand Voyager

1 Answer

Hi, My Cruise Control/Speed Control has stopped working. When functioning properly, you push the "On" button on the steering wheel and a small green cruise control icon lights up in the...


1. check fuses - owners manual.
2. check relays in engine compartment - owners manual
3. check the cruse controler and cable connected to the carb./throttle body.
4. wiring

Mar 25, 2011 | Ford Focus Cars & Trucks

1 Answer

Cruise controll


I guess the cruse is'nt working? You first need to look it over to see if everythings hooked up. Did it work for you before or you haven't seen it work? The switch on the dash will light after turning it on but the car has to be running for it to turn on . Does the light light? if not check the fuses and see if thier any blown? To check to see that everything is hooked up find the throttle body, one cablr goes to the gas pedal and the other goes to the cruse, follow this cable to the cruse unit and see if that unit has all it's wires and hoses connected. To check you remove them and reconnect them looking into the plug or hose for dirt rust bent pins. The hoses can crack on the inside and leak which will make it not engage. Follow these hoses to where thier connected to the engine and the brake pedal as they can split and be disconnected there too. The brake pedal switch has to work too as does the clutch switch ( if it has a clutch) If the brake lights don't work niether will the cruse. The hi mount brake light if the bulbs fail the cruse won't work. The switch on the steering wheel can get disconnected too as it's on a clockspring circuit as the steering wheel has to turn. Is the airbag light on? if it is and the horn does'nt work either it's likly that the clockspring is broken, If the horn works and the airbag light cycles like it's suposed to then the clockspring is likly OK. The speedometer has to work too as the speed senser that works it also works the cruse.If everything is working your problem could be more seriuos but it's not likly as this unit is quite reliable.

Jan 02, 2011 | 1996 Honda Accord

2 Answers

When the airbag light started flashing and decided to stay on the cruise control stopped working. you can also hear a rattle in the steering wheel. please help


Its the clock spring under the the centre of the steering wheel. You may find that the horn is not working as well as the cruse control, the clockspring connects the air bag sensor to the airbag in the centre of your steering wheel, it keep the connection in contact as the steering wheel turns.
You could replace it yourself if you take the steering wheel off but remember to disconnect the battery first as fiddling with airbags could cause them to go off!!!!

Dec 02, 2009 | 2005 Ford Taurus

1 Answer

98 plymoth grand voyager cruise control


disconnect battery and wait 20 minutes for safety

you need to remove the air bag (3 bolts behind the steering wheel) then remove the steering wheel 1 nut but you need a puller. then the column shrouds 3 screws under the column the unplug and replace the clock spring and put it back together.

Apr 21, 2009 | 2000 Chrysler Grand Voyager

1 Answer

Replace steering shaft now airbag light stays on horn dont work and the cruse control dont work help!!!


sounds like the steering wheel got turned during the proceedure to replace the shaft which means that you broke the clock spring which sits under the steering wheel.

Apr 19, 2009 | 2005 Chevrolet Malibu

2 Answers

Cruse controll


Pull up on the brake pedal. If that does not work check your brake light bulbs (LED brake lights will also keep your cruise control form working). Finally check all of the fuses. This system needs at least 3 different fuses to work properly.

Aug 05, 2008 | 1998 Honda Accord

Not finding what you are looking for?

Open Questions:

See all 1999 Plymouth Voyager Questions

1999 Plymouth Voyager Logo

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...