Question about 1987 Chevrolet S-10 Pickup

Open Question

How to replace chevy truck S10 windshield wiper arm

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnjohn2
  • 5763 Answers

SOURCE: what is the 94 Chevy Caprice Classic wiper arm

heres a wiper linkage asm diagram, the wiper washers are on the hood or on the cover to deck,then the hose runs through the wiper arm to a nozzle, if you remove the arms you can lift cover enough to look at the hose to washer connection,also check hose to arm they often break there good luck.2d8c418.gif

Posted on Mar 30, 2010

Ad
97F350diesel
  • 1326 Answers

SOURCE: windshield wiper driver's side went limp wind

THe wind doesn't just push the power arm off, it must be broken and will need be replaced, You need to check if the actuall bracket that holds the arm is broken as well. It has teeth on it which when the arm is put on it lock in place with a clip

Posted on Feb 28, 2010

ZJLimited
  • 17970 Answers

SOURCE: I have a 92 chevy S10 truck, how do you remove the

GM S10/S15/Sonoma Pick-Ups 1982-1993 Repair Manual Blade and Arm - REMOVAL & INSTALLATION
(see Figures 1, 2 and 3)

  1. Matchmark the base of the wiper arm to the linkage. This will assure the arm is installed in the proper position. If the arm is being replaced, transfer the matchmark from the old component to the new one before installation. This can be done by placing the new arm on top of the old one and copying the mark.
1bb2352.jpg

Fig. 1: Removing the wiper arm using J-8966

0234572.jpg

Fig. 2: If no wiper arm tool is available, use a small prytool to depress the spring

5227e24.jpg

Fig. 3: With the spring released, pull the wiper arm from the linkage
  1. Most wiper arms are retained by a spring clip. Some are equipped with a release tab at the center which should be depressed to release the arm. If no tab is provided, use a small prybar or a wiper arm removal tool such as J-8966 to depress the spring and release the arm. Remove the arm from the vehicle.
  2. Some late model vehicles (all 1993 and some earlier models) are equipped with a wiper arm that utilizes a small release hole at the base of the wiper arm. If equipped, insert a 1 / 8 in. drift pin into the tool access hole to release the locking device and allow the arm to be easily pulled from the transmission. If necessary, use a gentle rocking motion to remove the arm.
To install:
  1. Except for late model vehicles equipped with the tool access hole, align the matchmarks and gently press the blade over the linkage and snap into position.
  2. For 1993 vehicles (and earlier models equipped with the access hole on the arm) straighten the arm assembly and insert the pin. Align the arm with the linkage mark made earlier, then press down on the arm's head casting until it seats and locks onto the wiper pin. Remove the drift pin.
  3. Operate the wipers and verify proper alignment.

Hope helps (remember rated this).

Posted on Jul 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 chevy impala,drivers side windshield works great,the passenger side doesn't work at all,help!


You mean wiper arm ? Probably broken wiper arm linkage bushing you can't see , under the cowling . Can you move the passenger wiper arm up an down without much effort ? An not the drivers side ? To see it or get at it you would need to pull wiper arms off an take cowling off to get at it . How To Install Replace Wiper Motor 2000 05 Chevy Monte Carlo Impala How To Fix Broken Wipers EricTheCarGuy

Feb 12, 2017 | Cars & Trucks

1 Answer

Chevy s10 windshield wiper- the driver side wiper doesn't work.


that will most likely be the way to get to it . It appears that the arm has fallen of the crank. There is a small clip that holds them on and it may have rusted / broken off.

Apr 04, 2014 | Cars & Trucks

1 Answer

Drivers side windshield wiper on a 2004 Chevy caviler stopped working,how do i fix it


have to replace the wiper arm.there are splines on the arm that attach it to the stub.most likely stripped out in winter due to frozen windshield.

Jul 28, 2012 | 2004 Chevrolet Cavalier

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    1 Answer

    How do you remove the windshield wiper arms


    The wiper arms have a push in tab at the very bottom at the fitting that is pressed into the wiper linkage below the screen. Use a flat headed screwdriver to pry out the tab. Once out the arm can be pulled right off. Now you can remove the cowling screen

    Apr 07, 2010 | 1987 Chevrolet S-10 Pickup

    1 Answer

    Windshield wiper driver's side went limp wind


    THe wind doesn't just push the power arm off, it must be broken and will need be replaced, You need to check if the actuall bracket that holds the arm is broken as well. It has teeth on it which when the arm is put on it lock in place with a clip

    Feb 28, 2010 | 2004 Chevrolet Cavalier

    1 Answer

    Windshield wiper will not turn off . Hi and low speed works but intermintment will not work and will not turn off


    replace the wiper board, go to your local chevy dealer and purchase the wiper board. remove the wiper motor cover & you'll see the wiper board. be careful not to break to the plastic arm.

    Oct 12, 2009 | 2003 Chevrolet Silverado 1500

    1 Answer

    Wiper motor replacement


    SECTION 501-16: Wipers and Washers 1999 Town Car Workshop Manual REMOVAL AND INSTALLATION Mounting Arm and Pivot Shaft Removal
    1. Disconnect the battery ground cable (14301).
    1. Remove the windshield wiper pivot arms (17527).
      1. Remove the nuts (one each side).
      1. Remove the windshield wiper pivot arms.
    1. Remove the LH and RH cowl top vent panels.
      1. Remove the hood weatherstrip.
      1. Remove the screws.
      1. Remove the retaining clips.
        • Disconnect the LH and RH washer hoses.
    1. Position the windshield wiper mounting arm and pivot shaft (17566) assembly aside.
      1. Remove the nuts.
      1. Remove the bolt.
      1. Position the windshield wiper mounting arm and pivot shaft assembly aside.
    1. Remove the windshield wiper mounting arm and pivot shaft assembly.
      1. Disconnect the electrical connector.
      1. Remove the windshield wiper mounting arm and pivot shaft assembly.
    ----------------------------------------------------------------------------------------
    Motor —Windshield Wiper Removal
    1. Remove the windshield wiper mounting arm and pivot shaft (17566) assembly; refer to Mounting Arm and Pivot Shaft .
    1. Remove the windshield wiper motor (17508).
      1. Remove the output shaft bolt.
      1. Remove the bolts.
      1. Remove the windshield wiper motor.

    May 01, 2009 | 1999 Lincoln Town Car

    1 Answer

    1984 chevy S10 windshild wipers


    at the arm remove the cap on end and their is a nut remove it 10 mm / Please rate my response thank you very much

    Jan 28, 2009 | 1984 Chevrolet S-10

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,712 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6910 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...