Question about Cars & Trucks

Open Question

Replace positive battery cable pt cruiser - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 217 Answers

SOURCE: 2001 pt cruiser limited won't crank

needs a battery but be careful cause sometimes a bad alternater will cause the battery to go bad

Posted on Jan 17, 2009

Ad
blueextc3221
  • 15935 Answers

SOURCE: Crankshaft Position Sensor location 04 PT Cruiser

It is located behind the **** of the starter on the front of the engine starting in '03 the 2.4 lt was changes the repair manual failed to update this..you may sneak it out with small fingers with out pulling out the starter.

7e1821a.jpg

Posted on Feb 08, 2009

  • 6 Answers

SOURCE: i have a 06 pt cruiser the battery light came on

there is a tsb on that in the dealerships i belive there is a flsh for the computer to fix this problem i have been a mechanic at a chrysler dealership for 9 years now and that is a pretty common problem

Posted on Apr 01, 2009

hotrodshop
  • 106 Answers

SOURCE: schema the timing for pt cruiser 2003 touring motor 2.4

aa70e2e.gif2.4L timing belt installation and timing marks. Hope this helps.

Posted on Jun 06, 2009

BCAS1298
  • 3092 Answers

SOURCE: replacing a starter in a PT. Cruiser 2001

Remove battery and battery support you'll be able to undo starter bolt's trough there and slip starter out.

Posted on Dec 08, 2009

Testimonial: "This didn't help, because you had to remove the engine structural collar under the starter to get at the starter bolt. It was more complicated."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the shift cable from a pt cruiser gt5 speed


Chrysler PT Cruiser shifter cable bushing replacement ...

? 5:28
https://www.youtube.com/watch?v=akgIKm1pQLM
May 21, 2014 - Uploaded by MotorCity Mechanic
Chrysler PT Cruiser shifter cable bushing replacement ... Part 1/2: 1999-2003 Jeep Grand Cherokee 4.0 ...

PT Cruiser manual stick shift cable bushing tip - YouTube

? 3:18
www.youtube.com/watch?v=mU0sgQn-0qw
Jun 19, 2015 - Uploaded by Justin Shiffler
PT Cruiser manual stick shift cable bushing tip ... how hard was this to replace? my right bushing is gone and ...

Shifter cable broken for the third time - YouTube

? 1:06
www.youtube.com/watch?v=MiHSkqSrsLY
May 8, 2013 - Uploaded by CJ Turner
Shifter cable broken for the third time ... Chrysler PT CruiserBrake Light Switch Replacement, Shifter Stuck .


Oct 29, 2015 | Cars & Trucks

1 Answer

Troubleshooting pt cruiser


Most likely the alternator is bad. Best way for you to check is start it up, then pull the negative cable off the battery. If it dies the alternator is dead. As far as it draining when parked, I have replace a lot of the ignition lock set and keys because you can put it in the accessory position(All the way back) and pull the key out. Leaving on things like the radio.

Aug 03, 2014 | 2004 Chrysler PT Cruiser

2 Answers

Where is crank sensor on 2005 PT Cruiser? It absolutely is not above the oil filter as on 01-03 PT's.


REMOVAL - 2.0, 2.4, 2.4L TURBO
The Crankshaft Position Sensor is in the front of the engine block just under the starter motor (CRANKSHAFT POSITION SENSOR LOCATION).

Disconnect the negative battery cable.
Raise vehicle and support.
On 2.4L SRT-4 remove the lower inner cooler hose from the metal tube.
Remove the Structural Collar (Structural Collar and Bending Strut-(Automatic Transaxle Equipped) ), refer to the Engine, Structural Collar Removal and Installation section.
Unlock and disconnect the electrical connector to the crankshaft position sensor.
Remove the crankshaft position sensor bolt.
Remove the sensor. Arrow points to sensor in picture.


emissionwiz_108.gif

Aug 22, 2011 | 2005 Chrysler PT Cruiser

1 Answer

How to reset a computer code on a 2002 pt cruiser. I replaced the cam shaft sensor and it is still showing the same error code


Standard solution is to disconnect positive battery cable for 5 mins then reconnect. This will erace all prior codes.

Sep 09, 2010 | 2002 Chrysler PT Cruiser

1 Answer

Need procedure to remove and replace the battery in a 2006 PT Cruiser


BATTERY

GASOLINE ENGINE

REMOVAL

WARNING:
  • TO PROTECT THE HANDS FROM BATTERY ACID, A SUITABLE PAIR OF HEAVY DUTY RUBBER GLOVES SHOULD BE WORN WHEN REMOVING OR SERVICING A BATTERY. SAFETY GLASSES ALSO SHOULD BE WORN.
  • REMOVE METALLIC JEWELRY TO AVOID INJURY BY ACCIDENTAL ARCING OF BATTERY CURRENT
  1. Make sure ignition switch is in OFF position and all accessories are OFF.
  2. Open hood.
  3. Remove the air cleaner housing.
  4. Disconnect and isolate the battery negative cable then the positive cable.
  5. Loosen bolt (4) and retainer (1) that holds the battery down to the tray.
  6. Lift battery out of battery tray and remove from vehicle.
  7. Remove thermal guard (if equipped) from battery.

CAUTION: Vehicles equipped with the turbocharged engine use a unique battery hold down. If the replacement battery is not identical, in size to the original, it may be necessary to use non-corrosive spacers on top of the hold down retainer to properly secure the battery in the battery tray.


When replacing battery, the thermal guard MUST be transferred to the new battery (if equipped).
  1. Install battery in vehicle making sure that the thermal guard (if equipped) is present and battery is properly positioned on battery tray.
  2. Install battery hold down hardware (1), (2), (3) and (4) making sure that it is properly positioned on battery. Torque clamp to 12.5 N.m (110 in. lbs.) .
  3. Install battery cables on battery posts. Install battery positive cable first.
  4. Torque clamp nuts to 12.5 N.m (110 in. lbs.) .
  5. Install air cleaner housing.
  6. Close hood.
  7. Verify proper vehicle operation.


Jul 15, 2010 | 2006 Chrysler PT Cruiser

1 Answer

I have the same problem with my 2006 PT Cruiser .


sounds like you have broken shifter cable..if you remove battery and tray..you can see if cable is moving shift lever on trans..if it is,you may have something broken in trans on valve body

Jun 13, 2009 | 2006 Chrysler PT Cruiser

1 Answer

2006 PT cruiser dies intermittently---batery light dies no wiper


Sounds as if the alternator is not charging the battery. Check the alternator for voltage it should put out around 13 volts at idle and normal operation. If it charges then the battery is defective. A good place to start is clean the battery cables to remove any corrosion and make good contact. Many an electrical problem has been solved by cleaning battery cables.

Sep 01, 2017 | 2007 Chrysler PT Cruiser Touring Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...