Question about 1995 Chevrolet Suburban
My steering column was broken due to someone breaking into and trying to steal my car...which left me to hot wire, and/or use ignition switch to turn truck on..something happened when the wires touched and heater,windshield wipers,radio and power windows stopped working.....just had a new steering column installed and yet still nothing works...i need help single mom of seven in snow...
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
use a test light the wire from the battery should be hot all the time the wire that goes to the solenoid should be hot when the key is turned over to start and the wire going to the coil should be hot when the key is in run.
Posted on Nov 12, 2008
Well sure enough all I had to do was replace the circuit board...wish I had done this a couple months ago...it was so easy to do and will now be much easier to drive with being able to see clearly again....
Posted on Jan 08, 2009
SOURCE: 1997 Suburban windshield wipers
Don't need the book on the truck. For starters, go to your local dealer parts department and they can print out the label of the fuse panel for your truck. The fuse in question will be wipers. The most likely cause of your problem isn't your wipers but the swicth itself. Depending on whether or not you have cruise control, you can buy one for less at an aftermarket cruise control company. Once you get it, we can go live chat to tell how to change it out cause it's trick but all you need is string and tape. Before you buy the new one, unplug yours at the bottom of the steering column and plug the new one in to see if it works. If you found this helpful please post as such. I f you go to the shop, please post this as fixya. TY
Posted on Jan 16, 2009
with wiper on try to wiggle the wiper arm with your hand. if motor is stuck this will sometimes jar it loose. you may need to do this for a minute as the wiper is a delay system. also if you can move the arm thru its sweep then it is just the wiper arm loose if this is it remove cover at base and tighten nut
Posted on Jan 23, 2009
Tips for a great answer:
Apr 19, 2015 | 1996 Ford Explorer
Jul 24, 2013 | Oldsmobile Cars & Trucks
Mar 07, 2013 | 2004 Dodge Ram 1500
can be faulty wiper motor or blown wiper control fuse.
you hear any kind of noise when you starter the wiper function. If yes then
fuse is ok, but issue is wiper motor.
no movement at all and no noise then its blown fuse or shorted/loose wiper
control wiring: -----
complete troubleshooting i suggest you few helpful links with accurate
the link below: -------
1993 Ford F350 wipers not working?
How to Replace a Windshield Wiper Motor
Wipers not working, but hear relay click on Lincoln LS?
Car windshield wiper gets power for movement and stops?
How does cars Windshield Wiper System Works
1997 Honda Protege: Replace Wiper Transmission?
Windshield wiper fluid container leaking?
Where is wiper fuse located on1993 chevrolet suburban
2002 Toyota Sienna: Wipers and Passenger side Power window
Complete wiper components replacing details for Acura Car
These details will help.
Nov 29, 2012 | 2003 Chevrolet Cavalier
Nov 27, 2012 | Oldsmobile Intrigue Cars & Trucks
Dec 08, 2010 | 1995 GMC Suburban
Feb 20, 2010 | 1995 Ford Taurus
Oct 24, 2009 | 2003 Chevrolet Suburban
Jan 15, 2009 | 1997 Chevrolet Suburban
Dec 29, 2008 | 1995 Ford Escort
171 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: