Question about Chevrolet Cars & Trucks

Open Question

Camshaft censor on 1994 3.1 chevy corsica

I replaced the camshaft censor after i replaced the intake manifold gasket. Now it runs like it is missing

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
LT1Rob
  • 55 Answers

SOURCE: Torque Spec for '99 Chevy C1500 5.7L engine lower intake manifold

On 5.7L engines, install the bolts and torque in sequence as follows:

  1. Step 1: 71 inch lbs. (8 Nm).
  2. Step 2: 106 inch lbs. (12 Nm).
  3. Step 3: 11 ft. lbs. (15 Nm).
f2266b6.jpg

Posted on Mar 14, 2009

Ad
gabndan2
  • 35 Answers

SOURCE: How to install intake manifold gaskets and their location.

go to autozone.com and register free then select make year ect.
select repair info (you have to register 4 this)
step by step and photos!!!!

Posted on May 31, 2009

  • 14 Answers

SOURCE: intake manifold gasket replacement? radiator has a

nah its pretty simple for the upper intake. 10 to 12 bolts.

Posted on Oct 13, 2009

  • 12650 Answers

SOURCE: My 1999 chevy tahoe is leaking antifreeze. I

it could but- check passenger side front where heater core line go into manifold right behind alternator the hose line is connected by a press clip into an alloy fitting this fitting gets eaten away by anti freeze and hose angle pulls back on fitting the part is $18 at dealer and is screwed into manifold use caution if ur r going to replace at very edge of aluminum manifold---and check ur water pump bolts the 2 longer ones should have a lock sealant on them they bolt in thru a water jacket

Posted on Oct 24, 2009

  • 1 Answer

SOURCE: lower intake manifold gasket leaking 02 Olds Silhouette

Hey, did this solution work for you van? Is it still running and what problems are you currently having with it if any? Thanks!!!

Posted on Jan 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 saturn. I need to. Replace the. Camshaft. Censor


It does not have a Cam sensor. I would check for vacuum leaks around the area where the intake manifold bolts to the head. Very common for them to leak.

What is the RPM at and how long does it stay there. How long has it been doing this? Is the check engine light on?

Oct 05, 2016 | Saturn Cars & Trucks

2 Answers

Locating the camshaft position sensor


What is the year and make of the vehicle? That would help a great deal.

Sep 01, 2016 | Cars & Trucks

1 Answer

My 1994 buick lesabre misses out


Check the fuel pressure. It will tell you if the pump, fuel filter, and fuel pressure regulator are all good. Fuel pressure is critical on fuel injected engines.

Check your spark plugs for wear or the wrong gap.

Another possibility is a vacuum or air leak. Check all vacuum hoses and the intake manifold gasket. The GM 3.8L engine is prone to lower intake manifold gasket failures. Sometimes the upper intake gasket, too.

Sep 09, 2014 | 1994 Buick LeSabre

1 Answer

My 2008 Chevy uplander engine light on and the code shows for cam shaft sensor and intake manifold what I do


The intake code means its leaking from the intake,bad gaskets, or a vacuum leak. check for bad gaskets on intake manifold. You can tell by putting a bit of oil around the maifold. if it is leaking the engine will flair up. To check this, External leak-- Coolant seeps through the broken intake manifold gasket to the outside of the engine. If its bad enough you will see coolant dripping from gasket. Coolant seeps through the damaged gasket to the inside of the engine, mixing with motor oil. If you suspect an internal leak, check your oil dipstick. Or if you have a substance under oil filler cap that looks like a milkshake, Oil is mixing with coolant. this means intake gaskets are bad, Now for the camshaft sensor, If you have a manifold leak. this could be giving you a false camshaft reading! Because, If sensor is bad vehicle will not start unless theres a wire problem. Symtoms of a bad sensor are--- engine sputtering, poor acceleration, stalling/inability to start. HopeI helped you out! Good-Day!

Jul 26, 2014 | 2008 Chevrolet Uplander

1 Answer

1994 Chevy corsica Started missing after heavy rain. Has dried up but still missing. Could this be the kolpak or mechanical problems


most likely it is a electrical problem. Check your plug wires and plugs first. Replace them. If still missing, move on to the coilpacks.

Dec 03, 2011 | 1994 Chevrolet Corsica

2 Answers

I have a 2000 chevy s10 ZR2 4.3L V6. I had just replaced the intake manifold gasket. I went to start it up and have now developed a misfire in cyl 5. I have already put in new plugs and wires. I...


I have a 2001 Chevy s10 that I put an aftermarket air intake on. With high acceleration speeds, the car would lunge and stall. The engine would also quit. You need to make sure that you have no leaks in your intake manifold. If you have leaks in your manifold, your vehical will misfire. Check your air intake manifold by turning on your vehical on and running your hands up and down the air intake. If you feel air coming out, you have a leak. This needs to be corrected. I hope this helps! Please rate 4 thumbs up!

Apr 18, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Got a chevrolet pick up 1989 year 5.7L engine,it


CHECK THE CARB OR TDI MOUNTING BOLTS FOR TIGHTNESS OR CARB OR TBI GASKET LEAKING.COMPRESSION ACCEPTABLE YOU STILL HAVE INTAKE MANIFOLD LEAK. STOP UP FUEL FILTER.WEAK IGNITION COIL.WORN CAMSHAFT.

May 29, 2010 | 1989 Chevrolet C/K 2500

2 Answers

Looking to findthe mass air flow sensor on a 89 chevy corsica


hi the mass air flow sensor is in the intake hose/tube between the air filter and intake closer to the intake manifold will have wires pluged into the side of it

Dec 10, 2008 | 1993 Chevrolet Corsica

1 Answer

Noise under intake manifold


best thing to do is to take the intake and valve covers off, its possible you may have inadvertently sucked something up and it's in you intake. That is the best solution.

No telling what it is until you take things apart and take a look. It shouldn't be too hard, make sure you get new gaskets, gaskets are cheap anyways.

Jul 29, 2008 | 1994 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...