Question about 2003 Honda Pilot

1 Answer

1999 crv driver door will not unlock

The driver door will not unlock - no matter what method is used- you can't even pull up the inside whatever its called lever. And when I try to use my key it actually feels like it is try to lock itself- pushing against the key.

Last night - for the lst time- I was driving along after having crawled in from the passenger side- and all the doors locked by themselves- felt like a S. King movie. Any suggestion?

Posted by on

  • cece73020 Nov 11, 2008

    A friend of mine removed the fuse which controls the electric door locks- now the door unlocks but now I have to lock and unlock the doors manually. Not perfect, but saved about $150.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 78 Answers

Sounds like a lock actuator problem

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why will my drivers door not open,even though it locks and unlocks with key fob.


Sounds like the activator rod that goes from the door Handle to the latch is disconnected. You will have to get the door open to repair it and a good mechanic or tow truck driver can use a slim Jim kit to get the latch to release and then you can pull the door panel and find the problem.

Jun 29, 2014 | 1999 Volvo V70

1 Answer

I can't get in my drivers door from the inside or out


look at what is going on inside of drivers door by pulling window handle to pop door panel so you can see inside.

May 01, 2014 | 1999 Land Rover Range Rover

1 Answer

Honda crv door lock


Start by having your car checked for a Trouble Code. Many Auto Parts stores do it for free. It seems to be a security issue that keeps locking the door. It is a system which works separate from all the other systems in your car.

Mar 12, 2014 | Cars & Trucks

2 Answers

I but a new remote control of my toyota 4runner 1999 and i need i need direction on how to program the remote myself without me going to any dealer for me to save some money


Here are the instructions for programming the 99-02 4Runner Keyless Entry factory remotes:

1. Start with the following conditions: you are in the vehicle

a. Key is out of the ignition
b. Drive door is open ( all other doors are closed)
c. Driver door is unlocked (other door locks don't matter)

2. Insert the key into the ignition (don't turn it) and pull it out.

3. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times. Use an even pace and try
to go relatively fast.

b. Close, then open the drivers door.

4. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times (same as before).
b. Turn the ignition to ON then back to OFF.
c. Turn the ignition to ON then back to OFF.
d. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should cycle (automatically)
indicating successful entry into programming mode. Return to step 1
if the locks do not cycle at this point.

6. Perform these steps within 40 seconds:

a. Press the LOCK and UNLOCK buttons on the transmitter
simultaneously for 1 second.

b. Immediately after letting go of the lock and unlock buttons,
press the lock button by itself and hold for 2 seconds.
Within 3 seconds, the door locks should cycle ( LOCK then
UNLOCK) once-- indicating successful programming. If
the door locks don't cycle, or cycle twice. Repeat steps
6a and 6b--this remote has not been accepted.

c. Repeat steps 6a and 6b for EACH transmitter that will
operate the vehicle. Including any old transmitters.

7. Close the driver door.

Good Luck

Feb 28, 2011 | 1999 Toyota 4Runner

1 Answer

Drivers door will not open with key or battery hand piece,,other doors okay with both. 2002 crv


-If the problem is that keyless remote does unlock or lock door, but the lock lever still move when pulling up and down by hand. Door still open and close with both inner and outer, then might the driver door lock actuator is bad. The actuator lock and unlock the door for you when using the keyless remote or door lock/unlock switch.

-if you try using the key to unlock door and the key doesn't turn the door cylinder, then you have a bad door lock cylinder.

-if the lock lever doesn't move up or down and you can't open door using any handle, then you got a bad lock latch assembly.

I'm not sure what the issue is but hope this helps you.

Jan 18, 2011 | 2002 Honda CR-V

1 Answer

2000 BMW 323I WONT UNLOCK WITH THE KEY OR KEY FOB, ANY IDEAS?


I had same problem. Driver door would lock/unlock with key in keyhole in door, but not with fob, and other doors would not lock/unlock. Even once inside none of the doors would lock/unlock with lock switch, or even by pulling handles. Mechanic (very trustworthy) explained I needed a new control module (cost me $600). Good Luck. $600 is better than having to roll down the windows so Grandma can Luke Duke it outta the car.

Feb 19, 2010 | 1999 BMW 323 Series

1 Answer

2000 crv drivers door wont fully unlock with key


your window issue sounds like the power motor is slowly dying. In regards to the other question I'm not quite sure on what your question it in regards to the door, Thanks

Jun 27, 2009 | 1997 Honda CR-V

3 Answers

1999 Honda CRV automatic door lock only works for three doors


the little motor that operates it inside the door is probably frozen, so it will need to be replaced!!

Jun 19, 2009 | 1999 Honda CR-V

2 Answers

My Honda CR-V EX 2005 doors lock by themselves. Occasionally, after you unlock it with the remote key, it locks itself before you can get in. It also happens sometimes when I unlock the car, then open the...


They all do it, its part of the security system that all the doors lock after a minute or so from unlocking if you don't open the driver's door.
It prevents you from accidentally unlocking the car door while walking away and clicking the remote in your pocket, the car re-locks on its own.
If you open with the remote then open only the rear door, the other doors all lock and when you close the rear the alarm goes off.
What fun we have!


Jan 02, 2009 | 2003 Honda CR-V

1 Answer

Can't unlock the driver door


sounds like door motor has packed up,take of panel inside car and try to get your arm down to the unlock motor and work it manually to unlock it,good luck cause it aint easy done a few of these ....

Oct 19, 2008 | 1999 Volkswagen Passat

Not finding what you are looking for?
2003 Honda Pilot Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...