Question about 2004 Dodge Dakota

Open Question

How to get the fan off a water pump for 2004 dodge dakota pickup truck

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1995 Dodge Dakota Pick up

go to Didgeforums.com.

I had a similiar problem, found the solution there. It was the wiring harnes on the drivers side under the hood, just above the wheel well. there are a cluster of wires in a bundle. I unpacked the bundle carefuly and sure enough the were two or three wires all coroded, had wite powder from corosion. repaired the connections and bingo. I posted details at dodgeforums.com. browse around there. I posted pictures as well. this is a common problem.

Posted on Sep 05, 2008

  • 226 Answers

SOURCE: unable to remove fan from water pump

Remember, fan has a reverse thread. Righty-tightey, lefty-loosey does not apply. You need a clutch fan wrench. (available at your local auto parts store.)

Posted on Aug 16, 2009

  • 29 Answers

SOURCE: 1990 dodge dakota cooling system capacity???

at the max two gal, mix 50/50

Posted on Oct 01, 2009

ministock48
  • 258 Answers

SOURCE: 2004 Dodge Grand Caravan water pump

no it only calls for like .8 of an hour to chang it. it is very easy to change

Posted on Oct 23, 2009

  • 972 Answers

SOURCE: replacing water pump on 5.2L 99 dodge dakota water

somehow you need to grab a part of the pulley to prevent it from turning.i dont know if you were aware that the fan and clutch do not unbolt byt unscrew like a nut the directin to remove is on the fan shroud. if you cant get the fan off take the pump off with the fan on it, it can be done just you will have to remove shroud with it.then wrestle with it on the bench

Posted on Mar 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 Dodge Dakota pickup. Its not starting. Turns over well but dose not seem to get fuel.


Could be fuel pump issue, pressure regulator, fuel check valve, gas filter. Check all connections for soundness and conductivity.

Nov 13, 2015 | 2004 Dodge Dakota

1 Answer

What is the process of changing a water pump in a dodge dakota 3.9ltr pickup two wheel drive Thank you


It must be taken in to be changed @.5 hour labor and removal of belts, your looking at about $500.00.

Nov 15, 2010 | 1993 Dodge Dakota

1 Answer

Replacing water pump on 5.2L 99 dodge dakota water pump pully is broke so i cant take off the shaft that holds the fan and fan clutch im just looking for sugestions


somehow you need to grab a part of the pulley to prevent it from turning.i dont know if you were aware that the fan and clutch do not unbolt byt unscrew like a nut the directin to remove is on the fan shroud. if you cant get the fan off take the pump off with the fan on it, it can be done just you will have to remove shroud with it.then wrestle with it on the bench

Mar 08, 2010 | 1999 Dodge Dakota

2 Answers

How do i hold the fan nut on the water pump to remove the fan and replace the waterpump. on 1997 dodge dakota. 6cyl. thanx Tony.


the fan nut is part of the fan,you need to unscrew the nut from the water pump to remove fan,this is harder to do if you don't have the special tools to do this job Tony,

Jan 09, 2010 | 1997 Dodge Dakota

1 Answer

How do you change the water pump on a 1997 Dodge Dakota 6cyl 3.9liter w/ air?


1. Drain the cooling system.
2. Remove or disconnect the following:
* Negative battery cable
* Fan and clutch assembly from the pump
* Fan shroud and fan assembly.
* If you're reusing the fan clutch, keep it upright to avoid silicone fluid loss!
* Lower hose
* Water pump (8 bolts)
3. Installation is the reverse of removal. Tighten the bolts, in sequence, to 40 ft. lbs. (54 Nm).

Aug 13, 2009 | 1997 Dodge Dakota

1 Answer

My 1995 dakota is overheating, replaced water pump, thermostat, fan. What to do????


if the fan is working properly, the only thing left to check is the radiator...

i may be clogged or damaged so the water can't travel in it properly...

Apr 28, 2009 | 1995 Dodge Dakota

1 Answer

I JUST CHANGED THE WATER PUMP AND THE THERMOSTAT IN MY 2004 3.7 DODGE DAKOTA AND IT IS OVER HEATING WHAT DO YOU THINK THE PROBLEM IS?


water pump could be shot. but i'd try a lower temp thermostat first. might just not be opening up

Apr 03, 2009 | 2004 Dodge Dakota

1 Answer

The fan blade is loose & wobbles on the shaft on my dodge dakota


Fix it now or forever pick up the pieces...You have one of two problems possibly both...The fan clutch that the fan is bolted to has a bad bearing. replace it Or, the bearing in the water pump has failed. again...replace it. If fan clutch failed carefully check pump ...shaft bearing can be damaged by wobbling assembly. Seriously...don't ignore this if fan gets loose,it will damage far more than the problem you now have!!!
good luck!!

Mar 25, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Engine over heats


Have you Checked the Fan Clutch?

Jan 04, 2009 | 2004 Dodge Dakota

Not finding what you are looking for?
2004 Dodge Dakota Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...