Question about 2001 Hyundai Accent

1 Answer

What color are wires for overdrive button

What yo see if there is power to it

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Hyundai Master
  • 1,871 Answers

Hello! Pin 4=Red/Black (power in from fuse # 5 (10A)...Dash fuse box

Pin 5=Red/Orange (on)

Pin 6=Yellow (off)....
If you need additional assistance, do not hesitate to ask...Guru...saailer

Posted on Feb 12, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there a way to permanently disable the overdrive on my 1994 Ford f150

You should have an overdrive off button at the end of your gear shift lever. just switch it off and tape over the button. Or the wires from the button connect at the bottom of the shifter. The button is on or off, figure out which disengages the overdrive and either leave the circuit open or closed.

May 23, 2016 | Ford Cars & Trucks

1 Answer

What would cause the overdrive button to stop working on my 2002 F-150?

Start with the switch, does the power from the switch start and stop when pushing the button? Does the switch have power? If both are "yes" then it is a wiring problem from the switch to the converter. It may or may not go directly to the transmission, it may go thru the computer first, not sure. You do have an OBD plugin, go to AutoZone and have them check for any codes.

Sep 05, 2014 | 2002 Ford F150 Regular Cab

1 Answer

Won't shift into overdrive when button pushed

check gearbox oil level remove gear lever switch check feed to switch with meter or test lamp no feed check fuse if ok put 2 wires together car in 4th gear ignition on should hear click from overdrive solenoied if ok fit new switch if not check wires from lever to gearbox for breaks think you might find problem here if not check inhibitor switch and then solenoid hope this helps you

Dec 09, 2009 | 1992 Volvo 240

1 Answer

Trnsmission surges in overdrive

this is caused by the sensor at the side of the trans there is a 6 to 12 wire plug usualy white in color unplug it and see if this changes anything it is convertor lock

Aug 18, 2009 | 1991 Chevrolet Caprice

4 Answers

Overdrive button

in if you want overdrive on out if you want it off

Mar 25, 2009 | 1993 Toyota Camry V6

1 Answer

What is the button beside te shifter that has an

It's a switch for overdrive , N for normal driving,(overdrive on) and power (overdrive off) leave it in the N for better gas mileage,

Mar 20, 2009 | 2003 Chevrolet Tracker

1 Answer

Door ajar bell ring when headlights are turn on !

Try getting the wiring diagram from or find a service manual online for your car.

Jan 17, 2018 | 1986 Chevrolet Corvette

2 Answers

Overdrive button on extend cab ford f150

Problem Solved Look No Longer. Overdrive switch fuse blown, auto door locks not working, fuse after fuse after fuse, chasing wires grrrr. Remove the steering column cover (3 screws from the bottom) opens like a **** shell. Your switch is located on the shift lever, the wire for the switch is routed through the handle and comes out where the shift lever mounts to the column. Look very closely at the wire in this area. Most likely rubbed through. MR

Nov 19, 2008 | 2002 Ford F150 Regular Cab

1 Answer

Hyundai Overdrive wont engage

It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.


Jun 27, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
2001 Hyundai Accent Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides