Question about 2002 Buick LeSabre

Open Question

How to replace heater core on 2002 lesabre

Does the dash have to be removed

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Destinova
  • 46 Answers

SOURCE: heater core replacement

Actually if your handy the heater core on this car is pretty easy..  passengers side under the dash... but here is a link to some sites that will probably help  
from .... one of the wikki sites.. LOL cant remember which now

The heater core is located under the dash, in the center above the "hump". The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. First drain the radiator. Then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that are thru the center of the firewall. This has to be done from underneath the car while raised. I also had to unbolt a frame support to get to the hose clamps (I have big hands; you may be able to reach them without unbolting it). Remove the screws that hold on the cover to the heater core. You should be able to get the old one out now. Just go in reverse order to put it back together.

also this link is very handy they have a pretty complete collection for MANY vehicles
http://www.autozone.com/shopping/repairLanding.htm

Posted on May 30, 2008

proJekttaLon
  • 91 Answers

SOURCE: 1994 buick lesabre heater core removal

The heater core is located under the dash, in the center. The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. You must first drain the radiator then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that go thru the center of the firewall. Remove the screws that hold on the cover to the heater core. Then you should be able to get the old one out. There might be a couple of other minor steps but I'm sure you can figure them out. For re-installation just go in reverse order to put it all back together.

Posted on May 25, 2009

  • 44 Answers

SOURCE: how to remove heater core on 1997 buick lesabre

pull apart the dash. go on the passenger side and there you go

Posted on Feb 10, 2010

  • 3230 Answers

SOURCE: replace heater core on 2002 Buick Rendezvous

Hi there,

Well the heater core is located under the dash on the passenger side, usually cased in a plastic housing.You may have to remove the glove box in order to have access to. And when you get to the point, when you are disconnecting the coolant lines and remove the core you use some clothes to protect the carpet as fluid may drip. Post comments for further help or information........
Good Luck!!

Thanks for using FixYa!!

Posted on Oct 13, 2010

weekspena
  • 375 Answers

SOURCE: how to replace heater core 1994 buick lesabre

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Posted on Jan 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Ranger Extended Cab Heater Core Replacement


Not an easy job. Drop the steering column and remove the dash first. Then remove the plenum. Core is between the plenum and fire wall. Get a manual. Your saving hundreds doing it your self. 30 dollars for a manual is worth it.

Jan 26, 2015 | 2002 Ford Ranger

2 Answers

WHERE IS THE HEATER COIL AND HOW DO I REMOVE AND REPLACE IT


I own a 1994 LeSabre and the heater core on my car is located under the dash (in the center in a black plastic box). Remove some of the cosmetic dash pieces to access this black plastic box. First, you must drain the radiator of coolant, Then remove the two hoses. Next, the cover of this balck box can be removed by unscrewing the two screws Remove the screws and the heater core should now be accessable. Then you should be able to get the old one out.

Please remember to rate my solution. Thanks!

Jan 30, 2011 | 1992 Buick LeSabre

1 Answer

Heater core


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 08, 2011 | 1996 Buick LeSabre

2 Answers

How to replace heater core 1994 buick lesabre


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 01, 2011 | 1994 Buick LeSabre

1 Answer

Can I get to the Heater Core without going through the engine. (Maybe the side wall?)


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 18, 2010 | 1983 Buick LeSabre

2 Answers

How to install a new top and bottom hvac heater hose fitting for a 2002 buick lesabre custom


The hoses are moved by turning them a few degree's, then pulling them off. See diagram below.

658aa5f.gif

Jun 19, 2010 | 2002 Buick LeSabre

1 Answer

1994 buick lesabre heater core removal


The heater core is located under the dash, in the center. The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. You must first drain the radiator then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that go thru the center of the firewall. Remove the screws that hold on the cover to the heater core. Then you should be able to get the old one out. There might be a couple of other minor steps but I'm sure you can figure them out. For re-installation just go in reverse order to put it all back together.

May 25, 2009 | 1994 Buick LeSabre

1 Answer

Heater core


Yes remove the duct till You see core

Jan 23, 2009 | 1988 Buick LeSabre

1 Answer

Heater core replacement


Actually if your handy the heater core on this car is pretty easy..  passengers side under the dash... but here is a link to some sites that will probably help  
from .... one of the wikki sites.. LOL cant remember which now

The heater core is located under the dash, in the center above the "hump". The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. First drain the radiator. Then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that are thru the center of the firewall. This has to be done from underneath the car while raised. I also had to unbolt a frame support to get to the hose clamps (I have big hands; you may be able to reach them without unbolting it). Remove the screws that hold on the cover to the heater core. You should be able to get the old one out now. Just go in reverse order to put it back together.

also this link is very handy they have a pretty complete collection for MANY vehicles
http://www.autozone.com/shopping/repairLanding.htm

May 30, 2008 | 1994 Buick LeSabre

Not finding what you are looking for?
2002 Buick LeSabre Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...