Question about Porsche 944
I just bought a 1990 Porsche 944 s2, none of my brake lights work, i changed the brake switch, I cleaned the connectors of the ground wires located in the trunk(with sand paper and wd40) and checked the fuse under the hood - (which was good) bulbs look good from what I can tell - still no rear braking lights - what could the problem be ? Can anyone help ? - Thanks L,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My roof just stopped working this morning. My owners manual says that on the left rear side, in the trunk, when you pull back the carpeting there is a place for a crank. You use the spark plug wrench that came with the tool kit, although it is not with my car.
Posted on Nov 04, 2008
first of all the brake lights are always in the rear only!!. take the light bulb out and while some one is appling the brake pedal check to see if yo have power at only one terminal of the socket, then release the brake pedal and make sure yu dont have power at the same terminal , now if you had poer in one of the terminal then you have to replace the socket for the brake light bulbs.
look under the dash board right at the brake pedal switc where the brake light switch is located and make sure that the wires are not broken, you can also do a quick check by just disconnecting the brake light seitch and then jump the terminal off of the brake switch and you should have light if the light works this way then you have to replace the brake light seitch
Posted on Nov 24, 2008
SOURCE: Porsche 1990 944S2 Airbag Reset
When you put in airbags, you need to put new airbag sensors as well. If you leave the old sensors in, your airbags MIGHT deploy again. When you change both airbags and both sensors, the system resets itself. I have done this operation before.
Posted on Nov 30, 2008
Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".
Posted on Jul 16, 2009
Try this site: http://www.clarks-garage.com/
Go to the "shop manual" link and look under the "heater" heading.
Posted on Mar 14, 2010
Tips for a great answer:
Jun 22, 2017 | Porsche Cars & Trucks
Oct 01, 2012 | 1986 Porsche 944
Oct 15, 2010 | 1990 Porsche 944
Mar 14, 2010 | 1989 Porsche 944
Jan 17, 2010 | 1984 Porsche 944
May 27, 2009 | 1987 Porsche 944
May 13, 2009 | 1984 Porsche 944
Mar 24, 2009 | 1985 Porsche 944
Mar 18, 2009 | 1984 Porsche 944
Aug 06, 2017 | Porsche Cars & Trucks
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: