Question about 1999 Ford F150 Regular Cab

Open Question

1999 ford f150 fuel inertia switch - 1999 Ford F150 Regular Cab

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 70 Answers

SOURCE: need to find fuel cutoff inertia switch in a 1996

it is locate under dash board. a little to the right of center it is about 3/4 inch by 1inch is proably red or orange with a push button on one side. push the button

Posted on Aug 06, 2009

Ad
  • 1 Answer

SOURCE: no power to fuel pump or fuel pump wiring harness...

try the electrical ignition switch on the steering wheel colum

Posted on Aug 25, 2009

sscullys
  • 984 Answers

SOURCE: fuel pump relay location 1999 ford F150

Engine Compartment fuse panel ( driver's side fender ) relay 301. Layout with numbers should be on the lid ( numbers only, not the functions ).

If you did not get an owners manual with your truck ( purchased used / lost ), you can download one from Ford in PDF format:
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Makes it real quick to search for keywords.

Posted on Dec 08, 2009

sscullys
  • 984 Answers

SOURCE: 1997 Ford F150 Electric Fuel Pump will npt pump

Did you check the fuel inertia switch in the passenger side kick panel ?

The fuel pump is powered :
the fuse to the fuel pump relay.
The fuel pump relay to the fuel inertia switch
The fuel inertia switch to the fuel pump itself.

At the fuel inertia switch in the kick panel, power from the relay is the Dark Green w/ Yellow stripe wire and the pink w/ black stripe wire is the power. from the fuel inertia switch to the fuel pump.

If you jumper the fuel pump relay, you should hear it run. If not pull the fuel pump relay, and check the pins in the relay socket, pin 30 should be the power from the fuse.

50b0c31.jpg

If you have power at pin #30, jumper the relay socket as shown with the red line above, and check the dark green w/ yellow stripe wire at the fuel inertia switch for power.
Press the button on the top of the fuel inertia switch, and check for power leaving the fuel inertia switch on the pink w/ black stripe wire.

This is tests good, check for power at the fuel pump, same pink w/ black stripe wire.
Fuel inertia switch info is in the owners manual, If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Posted on Jan 03, 2010

  • 100 Answers

SOURCE: e-150 fuel pump inertia switch location

on some fords it is on pass side kick panel you have to feel in a hole and you will feel a reset button,hope this helps

Posted on Feb 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Looking for location of fuel reset button on 2003 f 150 xl ford triton v/8 truck


I looked at owners manual for 03 ford f150, found this picture for inertia switch location.

26285846-v0hp42zybeznw5lyrylcdiep-4-0.jpg

Sep 18, 2016 | Ford Cars & Trucks

1 Answer

How do you turn the fuel pump shut off button back on a 99 Ford windstar


  • The inertia fuel shutoff switch is located behind the driver side scuff panel. An access hole is in the scuff panel to access and reset the fuel shutoff switch.
NOTE: In the reset position, the button can be pressed an additional 1.59 mm (0.0625 inch) against a spring. This is a normal condition.
To reset the inertia fuel shutoff switch , press button on top of inertia fuel shutoff switch .


saailer

Apr 16, 2015 | 1999 Ford Windstar

1 Answer

How to change fuel pump fuse 2002 ford f150


go to 2002 ford f150 owners manual and download it free from ford then go inside the manual to road side emergencies the fuse diagrams for the passenger and power distribution box are there and so is the fuse location also check for fuel inertia switch in case you got hit and press the reset button in and the car will start again

Feb 17, 2015 | 2002 Ford F150 Regular Cab

1 Answer

How do I troubleshoot the ford f150 fuel shutoff inertia switch?


need to ck for power at the inertia switch caming form relay

Sep 25, 2014 | 1998 Ford F150 Regular Cab

1 Answer

I change the fuel pump but it still say pump module off line


If this would be a Ford product, you may have to reset the "Inertia switch". Depending on the car or truck it can be behind or above the front kickpanels or rear cargo area or trunk. There is a button to press and it then connects the power to the fuelpump.

You can do a Websearch by putting in the vehicle year,make and model followed by Inertia sensor location. Like 1999 Ford F150 Inertia switch location. Then hit find or enter.

Jan 26, 2012 | Cars & Trucks

1 Answer

2001 ford f150 new fuel pump filter relay and checked inertia switch but 6.5 volts at cutoff switch and at the fuel pump should it be 12volts


Yes it should be 12 volts at the pump. i have had this problem at the shop a couple of times and i replaced the inertia switch and it fixed it. Also check the connector at the inertia switch, there is high resistance in the circuit which is causing the voltage to be low.

Jan 07, 2011 | 2003 Ford F150 Regular Cab

1 Answer

Truck will not start and i need to know where the fuel pump relay is located?


Your fuel pump relay is in the under the hood fuse box and should be marked. If not looking into the fuse box you"ll have two rows of fuses (side by side ) totaling 18 fuses, there are two relay just above the two rows of fuses and the one directly above the fuses is the fuel pump relay. Also you mite want to check your inertia switch and make sure the red center button is depressed ! you"ll find the inertia switch located behind the right hand kick panel (down on the floor inside the vehicle,passengers side ) good luck thanks for using fixya

Jan 03, 2011 | 1999 Ford F150 Regular Cab

1 Answer

1999 Ford f150 V8 4.6 Fuel pump does not run up. Where is the relay and or fuse? How do I check the pump?


Did you check the fuel inertia switch ?

From the owners manual pg 155 :
Engine compartment :
Fuse # 10 - Fuel Pump
Fuse # 18 - Fuel injectors

pg 156
Fuel pump relay relay #302
You can swap the fuel pump relay with one of the trailer tow adapter relays to test with.

You can always jumper the normally open contacts in the relay socket ( shown as the red line below ) :
a3fcf2f.jpg

Oct 01, 2010 | 1999 Ford F150 Regular Cab

1 Answer

1997 Ford F150 Electric Fuel Pump will npt pump


Did you check the fuel inertia switch in the passenger side kick panel ?

The fuel pump is powered :
the fuse to the fuel pump relay.
The fuel pump relay to the fuel inertia switch
The fuel inertia switch to the fuel pump itself.

At the fuel inertia switch in the kick panel, power from the relay is the Dark Green w/ Yellow stripe wire and the pink w/ black stripe wire is the power. from the fuel inertia switch to the fuel pump.

If you jumper the fuel pump relay, you should hear it run. If not pull the fuel pump relay, and check the pins in the relay socket, pin 30 should be the power from the fuse.

50b0c31.jpg

If you have power at pin #30, jumper the relay socket as shown with the red line above, and check the dark green w/ yellow stripe wire at the fuel inertia switch for power.
Press the button on the top of the fuel inertia switch, and check for power leaving the fuel inertia switch on the pink w/ black stripe wire.

This is tests good, check for power at the fuel pump, same pink w/ black stripe wire.
Fuel inertia switch info is in the owners manual, If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Jan 03, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Cant get power to fuel pump on a 1986 ford van 300 six cylinder


The Fuel Pump Relay Is Mounted Under Hood On Driverside Firewall Right Under The Hood Hinge In A Black Case

Jul 09, 2009 | 1986 Ford F150 SuperCab

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...