Question about Cars & Trucks

Open Question

Fuel wont egnite on alkota 210 heater

Have ignition and fuel at the nozzke and will not ignite

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 122 Answers

SOURCE: 88 honda civic wont start

a couple things could be the issue: 1. check battery terminals and cables, look for green oxidation on the Neg and Pos cable(s) and check where the cables connect to the battery (normally white caked on clump) clean with baking soda and water combo, be careful use gloves and goggles. once the post and connectors are clean, apply a little vaseline to both terminals. 2. have battery checked out to make sure it is fully charged (autozone or local auto parts store should be able to do this for free) 3. check starter connections (I had a similar problem and one wire was not secure, this fixed it for me). 4. check fuses and relays, in addition to the cable, I needed a fuse that limits the voltage coming into the fuse box. 5. starter solenoid, this could need replacing, it is not engaging the starter to crank the engine. Good Luck and I hope one of these can solve your issue!

Posted on Sep 13, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a titan deisel generator and would like to know what egnites the fuel


Diesel engines ignite with pressure and heat unlike gasoline engines that use spark plugs for ignition.

Dec 13, 2014 | Cars & Trucks

2 Answers

98 ford explorer replaced egnition. Now it wont start. Starting fluid does turn it over. But isn't getting feul


out of fueL, bad fuel , old fuel>?

replace what exactly , ignition parts t are many.
key switch.?
Igniton coil(or coils, or cops or coil packs)
Distributor.
spark wire, (not replaced 1 by 1 = fail..)
ok , the PCM monitors spark and that fails, (even if spark is good)
it will cut fuel. so what did you touch>?

i use a noid light, if pass I check fuel pressure
if noid fails, i find out why PCM is cutting fuel.
check fuses 1st. always. for ever. and ever

Jul 05, 2014 | Cars & Trucks

1 Answer

Well i lost my kyes so i broke the egnition so now the security light is flashing and it wont start so i went and got a hole new egnition wiering all the way to the kyes if i just take the old one out and...


The computer wont let you start the car because your key probably had a chip in it. so until you replace the ignition and have a dealer make a new key specific to your truck. ya it wont start.

Jul 31, 2011 | 2001 Chevrolet S-10

1 Answer

Cannot turn the ignition. it just won't turn. the wheel's not locked up but the ignition is.


i have done this before an it worked so u could try it take a socket close to the size of the egnition an a hammer remove key fist an drive it home an then try key again if it doesnt work replace egnition if it does work dont remove key till u ready to replace egnition

Dec 20, 2010 | Chrysler 300M Cars & Trucks

1 Answer

My car turns but wont start has gas 1990 cadi deville


maybe ur fuel pump needs replacing. if fuel pump goes out no gas to egnition. or your fuel pump relay might have blown chech owners manual or relays.

May 05, 2009 | 1990 Cadillac Deville

2 Answers

Engine stalls without warning


check engine light comes on after driving any given amount of time. Replaced egnition modual didn't work, replaced pcv valve, didn't work, replaced stater module, didn't work, replaced the fuel filter, didn't work. Took it in for diagnostics and was told that it is either the egnition module, computer, or the wires that are attached to the computer that go out to different parts in the engine.

Jul 29, 2008 | 1993 Chevrolet Caprice

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...