Question about Toyota Corolla

Open Question

How to replace light bulb in Toyoya Corolla 2005 1.6 T3

How to replace bulbs in front drivers side headlight

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: How to change front right headlight bulb (left side when facing car)

Unplug the connector running to the back of the headlamp bulb. Remove the rubber ring that is on the back of the headlamp. It just pulls off. After the rubber is removed, you will see the clip to release the bulb.

Posted on Oct 07, 2008

Ad
  • 5 Answers

SOURCE: 99 cutlass supreme headlight bulb replacement

Look at the top of the headlight assembly. There is a plastic panel on top of the assembly that is held in place by two plastic pins. Remove those pins by lifting the center of the pin and then pull out the pin. Remove the panel. Then you will find two small plastic levers that will lift about 1/2 inch. They do not come out but they will release two studs that secure the assembly. After the assembly is released, slide it forward to access the bulbs you need to replace. Installation is the reverse of these procedures.

Posted on Mar 08, 2009

  • 37 Answers

SOURCE: Headlight bulb replacement for 2002 Hyundai

http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?targetPage=productsHowToInspect&leftNavPage=productsHowTo&pageId=%090900c15280213e7e&subtitle=replace

Posted on Apr 23, 2009

MNfisherman
  • 11896 Answers

SOURCE: Replace headlight bulb on 2005 Chrysler Sebring.

NO NO! Just reach in with hood open and turn the plastic ring that holds bulb and harness in. Then you can just pull it out and replace it.

Posted on Jul 06, 2009

  • 231 Answers

SOURCE: replace headlight bulb on 2007 xc70

Get a Haynes manual for the vehicle, it will show you everything you need to know. Online or auto parts store.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?


Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb


Jul 03, 2016 | 2003 Suzuki Grand Vitara

1 Answer

The right headlight for my 1999 ce corolla is not working but the side light is working and the full light is work


HEAD LIGHT BULB COULD BE BLOWED.REPLACE HEADLIGHT BULB STILL DONT WORK USE A 12 VOLT TESTLIGHT CHECK TO SEE IF HEADLIGHT BULB SOCKET GETTING POWER WITH LIGHT SWITCH ON POSITION HOOK TEST LIGHT WIRE TO A GOOD GROUND THEN PROBE POSITIVE SIDE OF HEADLIGHT BULB SOCKET.IF TEST LIGHT COME ON THEN MORE LIKELY BULB SOCKET WORN OUT NOT GETTING GOOD GROUND CONTACT INSIDE SOCKET OR GROUND WIRE LOOSE BROKEN.

Oct 31, 2010 | Toyota Corolla Cars & Trucks

1 Answer

Cobalt 2005 ls headlight bulb replacement


Instructions Things You'll Need:
  • 9007 LL halogen headlight bulb
  • Wrench
  • Gloves or clean rag
  1. Step 1 Set the parking brake and remove the keys from the ignition to ensure your Chevy Cobalt won't roll while you're replacing the headlight bulb.
  2. Step 2 Open the hood by pulling the hood release latch located under the instrument panel on the driver's side of the car. Locate the secondary release latch on the front of the hood at the center, slightly towards the driver's side. Slide the latch to the left to release the hood and raise it.
  3. Step 3 Locate the headlight assembly and remove the bolts by turning them counterclockwise. Set the bolts aside in a safe place, so you won't misplace them.
  4. Step 4 Remove the plastic fasteners from the headlight assembly molding. Carefully pull back the front fascia, or molding. You may need an extra pair of hands to perform this slightly awkward task.
  5. Step 5 Grab the headlight assembly and pull it towards the radiator at a slight angle to remove it. This should provide easier access to the headlight bulb and wiring harness.
  6. Step 6 Lift the plastic locking tab on the wiring harness to disconnect the bulb base. Then, disconnect the wiring harness from the bulb socket and remove the black retainer by turning it counterclockwise.
  7. Step 7 Disconnect the bulb socket by turning it counterclockwise. Remove the old bulb from the socket by firmly, but gently pulling it straight out.
  8. Step 8 Replace the old bulb with a new 9007 LL halogen headlight bulb. Put your headlight assembly back together by reversing the steps when you disassembled it. Use 89 inch-lb torque when retightening the headlight assembly

Feb 26, 2010 | 2006 Chevrolet Cobalt

1 Answer

Howdo I replace the headlight son a 1998 corolla?


the bulb is held in with a metal clip, if your trying to replace the driver side, check out the passenger side first, it will give you a idea of what your working with

Dec 04, 2009 | 1998 Toyota Corolla

2 Answers

How do I change the low beam bulb(drivers side) on 2005 Pontiac Grand Prix?


Upside down L shaped bracket that is bolted to frame just behind headlight assy. Unbolt bracket, lift bracket straight up to unlock headlight assy. Headlight assy should easlier fall forward to replace any of the 3 bulbs

Sep 26, 2009 | 2005 Pontiac Grand Prix

2 Answers

Replace front head light bulb on drivers side 2005 beetle


The headlight is actually a bulb inserted into a light module. You can remove the plastic light module by releasing the tension spring on the rear of the headliht housing inside your hood. Once the tension spring is released pull the plastic light module from the fender socket by gently pulling on the edges of the headlight. The module should pull out with some minor difficulty. Remove the bad bulb from the rear of the plastic bubble, and replace it with a new halogen bulb. Replace the module into the fender socket and reclip the tension spring(s). Not all that difficult of a job once you know how its accomplished.

Aug 19, 2009 | 2005 Volkswagen New Beetle

2 Answers

I own a 95 Toyota Corolla console light bulb replacement


OK, I just did the job-Replaced the burnt out light bulb in the center console for the shift indicator on a 95 Corolla. Took about two hours of which 11/2 hrs was wasted time. Once you pry off the cover, which is best done with a screw driver front the front as the back is the semi-spring loaded clasps, you will see the shift indicator box. Look around the edges, just below the top and you will see four tabs. If you push or manipulate the tabs to release the lid you will find the bulb in the indentation on the drivers side. The bulb is in that indentation. It is a pull out push in type bulb (148?). Pull it out; put a new on in and put the parts back together. You may want to test before closing the box but remember the light only comes on when you have you headlights on-Must be in the dashlight system. Took me less than ten minutes to put all the parts back together including the ones throughout the console cover which did not need to come out in the first place.

Apr 10, 2009 | 1995 Toyota Corolla

1 Answer

Driver side headlight bulbs burned out on 2003 VW Golf


There is a light cover in front of the battery... take this off and then look for the metal clamps holding the light housing in.  (I say clamps, but they're more like glorified paper clips on either side of the fixture.)  Press in on each side, pushing the clamps towards each other and pull the fixture out.

Nov 21, 2008 | 2003 Volkswagen Golf

2 Answers

Headlight problem hatchback, replace highlight bulb drivers side


Hi. You may wanna remove some additional accesories that may obstruct your way to the light bulb. usually these are locaated in front of the battery, so you need to disconnect and remove it and change the bulb.

Jul 07, 2008 | 2002 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...