Question about 2004 Renault 181
Ive had new turbo and solenoid fitted but check injection light still comes on when i drive it for a bit and losses power when i stop the car the light gos of again i have had it on the computer but its showing no faults at all has any one had this problem or knows whwt could be wrong as my local garage are baffled aswell
Sometimes a problem in the computer itself can cause that.
Posted on Feb 12, 2012
Is the garage using a Renault clip diagnostic tool as integral faults will not show up on other diag comp and have they tested while the fault is present as some faults do not store
Posted on Jan 02, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The track guide that operates the window from the motor is damaged or has jumped track. Remove the inner door panel and operate the window and see which has happened. If it has jumped track check for missing or damaged guide retainers if it is damaged or broken replace it. Normally runs about $15 to $20 for the part. Now if the drive guide is not damaged and it is still not working the gear that drives it is damaged and you will need to replace the motor as this is pressed on and not user replaceable. Good Luck
Posted on Sep 12, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Most likely to be a faulty resistor block, which has 3 resistors and a thermal fuse controlling fan speeds 1,2 and 3, maximum speed 4 by-passes the resister block. It may also be poor electrical connections to the resistor block caused by overheating. Renault ask for approximately £350 to carry out repairs, a replacement resistor block will cost £50. If you decide to carry out the repairs yourself, be advised that if you are not competent to carry out such work you, could cause electrical damage or worse an electrical fire.
Posted on Nov 14, 2009
sorry my pet hate hate ,renault electrics ,this is a dealer only job because the vehicle uses advanced encrypted software that not even the dealer has ,its connected via the internet to the factory direct .So pay your money and take your chances
Posted on Jan 17, 2010
Tips for a great answer:
Mar 11, 2015 | 2007 Renault Scenic 1.5
Jul 08, 2014 | 2005 Renault Grand Scenic
Aug 25, 2010 | 2003 Renault 181
May 16, 2010 | 2004 Renault 181
Apr 07, 2010 | 2001 Renault Sportwagon
Apr 29, 2009 | 2006 Renault 181
Mar 15, 2009 | 2004 Renault Sportwagon
Aug 12, 2015 | 2004 Renault 181
347 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: