Question about 1992 Daihatsu Charade
Have you checked the battery connections, or charge-up battery if dead
Posted on Feb 12, 2012
Testimonial: "Checked this out battery fully charged but still nothing."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Just put a car jack under the sump with a piece of wood between the jack and the sump. Take up the weight of the engine and then release the engine mount if required. Make sure to put some chocks (e.g. brick) behind and in front of the wheels to stop the car rolling.
Posted on Sep 13, 2008
You need to check the throttle stop cushion is making contact. The engine will hunt if you have air in the throttlebody coolant pipes, if the coolant sensor is faulty or if the TPS isn't calibrated.
Posted on Sep 04, 2008
If you find this Info Helpful Please Rate Me as It Helps me to reach the Expertise STATUS that I have Worked 30yrs to get to LoL Thank You Very Much and Have a Great Week!!
Firing Order: 1 - 2 - 3
Base Ignition Timing
Note: With the T terminal Shorted.5 +/- 2 deg BTDC
Ignition timing should be checked and adjusted, if necessary whenever spark plugs are replaced or any distributor maintenance is done. Ignition timing should be 3-7°BTDC at 750-850 RPM with the engine check connector terminal 11 (brown) shorted, Fig. 1. The engine check connector is located near the top of the transaxle.
Posted on Jan 21, 2009
You won't need to change the jets. We have had the Cb60 pumping 75- 90kW on the stock carby. Are you trying to increase performance there are better ways: e.g. RHF5 series turbo, lightened flywheel (4.5kg) with Mazda 121 clutch plate and 1600lb pressure plate. Swap in a G202 electronic dizzy& coil, and replace vacuum advance diaphragm.
Carby hat looks like this:
Posted on Feb 18, 2009
Tips for a great answer:
Dec 06, 2016 | Daihatsu Charade Cars & Trucks
Jan 13, 2016 | Daihatsu Cars & Trucks
Nov 17, 2015 | Daihatsu Cars & Trucks
Feb 26, 2013 | Daihatsu Charade Cars & Trucks
Oct 05, 2010 | 1992 Daihatsu Charade
Dec 29, 2009 | 1990 Daihatsu Charade
May 07, 2009 | Daihatsu Charade Cars & Trucks
Aug 16, 2008 | 1992 Daihatsu Charade
Jul 30, 2008 | 1990 Daihatsu Charade
762 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: