Question about 2007 Toyota Avanza 1.3

Open Question

Toyota avanza rear seat belt does not retract

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: 2002 Toyota Solara Convertible seat belts not retracting

The front seatblet retractor springs have weakened. Unfortunatly, there are no "user serviceable parts" on them. They would have to be replaced. How many miles is on it? If you have low mileage, the Toyota Customer Experience Center may provide you some assistance, as the belt replacements are quite expensive. I'd call the CEC and explain your dilemma. Here is the number: 1-800-331-4331

Posted on Sep 23, 2008

Ad
  • 3 Answers

SOURCE: 1991 Toyota Camry Automatic seatbelt harness

I would say its the door jam sensor telling your car the door is open is shorting out causing it to not create a connection when all the way released

Posted on Apr 29, 2009

  • 1 Answer

SOURCE: 99 Toyota Camry one of the rear seat belts won't retract

You have to actually unbolt the belt holder behind the seat. Then from there you can check to see if the spring still works. You'll probably have to take the cap off it, wind the spring-load, then put the cap back on. If you can get to it, it's not too difficult. I recommend another pair of hands to help hold if they're available. You'll also want to make sure you've rolled the belt up as much as possible before before you coil the spring-load.

Posted on May 14, 2009

  • 142 Answers

SOURCE: I have a 98 Toyota Camry and the left rear seat

The belt will need to be replaced. never try to fix a seatbelt due to safety reasons. you can get complete belt from a salvage yard. just remove the bolt that secures it to the vehicle.
Be sure to tighten the new one down so it is good and tight.

Posted on Jun 03, 2009

  • 88 Answers

SOURCE: Replacing a rear seat belt in a 1998 Toyota Camry

if its centre belt remove rear seat to undo bolt out side one remove cover on upper belt to expose bolt

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove toyota avanza rear seats ?


USUALLY THEY ARE EITHER BOLTED TO THE FLOOR AT THE BASE OF THE SEAT, ON EACH SIDE! YOU CAN VISUALLY SEE THE BOLT HEADS! IF YOU CAN'T SEE THEM, YOU CAN TRY PUSHING IN, AND UP ON EACH SIDE OF THE SEAT TO REMOVE IT FROM THE CLAMP UNDERNEATH! YOU'LL HAVE TO REMOVE THE BOTTOM OF THE SEAT FIRST, TO GET TO THE BOLTS HOLDING THE BACK OF THE SEAT ON!

Feb 27, 2011 | 2008 Toyota Sienna

1 Answer

Car seat belt will not retract


JUNK YARD ITEM , BETWEEN $50 TO $75


Jul 24, 2010 | 1995 Toyota Tacoma

1 Answer

Rear Seat belt pretensioner retractor is broken


the panel just prises off but the clips break dead easy,
IF THE SEAT BELT DOES NOT RETRACT REPLACE IT,youy cannot play with an explosive device.....

May 20, 2010 | 1998 Toyota Camry

1 Answer

Rear middle seat belt wont retract


Sounds like a mechanicel problem in the belt box. Do you have a guarantee for that car?

Aug 17, 2009 | 1996 Toyota Corolla

1 Answer

Seat belt will not retract. how do i fix it?


The mechanism that allows it to retract is broken. Replace the seat belt.

Jul 15, 2009 | 2004 Dodge Grand Caravan

1 Answer

99 Toyota Camry one of the rear seat belts won't retract


You have to actually unbolt the belt holder behind the seat. Then from there you can check to see if the spring still works. You'll probably have to take the cap off it, wind the spring-load, then put the cap back on. If you can get to it, it's not too difficult. I recommend another pair of hands to help hold if they're available. You'll also want to make sure you've rolled the belt up as much as possible before before you coil the spring-load.

Apr 25, 2009 | 1999 Toyota Camry

1 Answer

Retractable seat belt wont close


Is this a NEW seat belt?  Or a junkyard part... Per the Toyota 1988 Repair Manual - the belt is allowed to be pulled out at a tile of 15 degrees or less; and cannot be pulled out at over 45 degrees of tilt.

Your problem is the belt is not retracting.  The manual states to replace the assembly.  It also states: "Whenver installing a new belt assembly, verify proper operation before installation."

If a new part does not have proper operation; have it replaced. If this is a 'used'  new part - get a NEW seat belt.

Apr 07, 2009 | 1988 Toyota Camry

2 Answers

1991 Toyota Camry Automatic seatbelt harness


http://www.toyotanation.com/forum/showthread.php?t=300887
Full version about Automatic Seatbelt troubleshooting for 87-91 Camry written by Professor Oleg Turkin

Jan 26, 2009 | 1991 Toyota Camry

1 Answer

Center rear seat belt not retracting


in short;
remove rear door weather strips
remove upper c-pillar trim
remove rear deck lid cover retainer screws
remove rear deck lid trim cover
and your seat belt assembly will be right there

Jun 18, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
2007 Toyota Avanza 1.3 Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...