Question about 2009 Hyundai Sonata

Open Question

2009 hyundai ignition lock cylinder - 2009 Hyundai Sonata

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 hyundai santafe the ignition key doesnt turn at all


try key number 2 , looks like the cylinder lock has to be changed

Feb 08, 2018 | Hyundai Cars & Trucks

2 Answers

I have a 2009 Kia Rio. When i put the key into the ignition it will not turn therefore the car will not start.


wiggle steering wheel up and down sometimes the steering lock tab jams and wont permit key to turn ====if key worn down will not let ignition cylinder turn other is bad ignition cylinder

Jul 30, 2016 | 2009 Kia Rio 1.6

1 Answer

How do u remove the ignition lock cylinder on a 2005 Hyundai accent if u can't turn to acc? It won't turn at all, I've jiggled the key, and turned the steering wheel, which is also locked..


There should be security bolts holding the lock cylinder to the column. Security bolts heads twist off at the factory leaving a smooth top that you have to back out with a sharp center punch and hammer.

Jun 12, 2015 | 2005 Hyundai Accent

1 Answer

2009 Chevy Impala key stuck in ignition


Electronic Park Lock (EPL)/Ignition Lock Cylinder Control Actuator: If the vehicle is equipped with automatic transmission and a floor mounted console gear shift, it has an ignition lock cylinder control actuator system in the steering column. The ignition lock cylinder control actuator purpose is to prevent the ignition key from being turned to the OFF position when the transmission is in any position other than PARK and the vehicle may still be moving. The column ignition lock system consists of an ignition lock cylinder control actuator, and a park position switch that is located in the automatic transmission shift lock control switch. The ignition lock cylinder control actuator contains a pin that is spring loaded to mechanically prevent the ignition key cylinder from being turned to the lock position when the vehicle transmission is not in the PARK position. If vehicle power is lost, and/or the transmission is not in the PARK position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column.

Does your impala have floor shifter ?

Jan 31, 2018 | Chevrolet Cars & Trucks

2 Answers

2009 HHR Standard (not automatic) Key Stuck in Ignition


FYI this is now a free dealer fix--Service Bulletin--not a recall. chevy sent letters reregarding issue. Mine was the lock cylinder housing was faulty, the piece that holds the springs to the pieces in for the key shape poped out. temp fix is you can unplug wiring harness under steer wheel to disable the car and remote will still lock door and alarm still works. Of course mine went out on a saturday afternoon. you can remove the lock cylinder yourself and take to locksmith, they can fix the cylinder probably for under 10 bucks. i luv it a 16000 car stuck because 1/8" by 1/2" piece of metal comes loose.

Aug 30, 2012 | 2009 Chevrolet HHR

1 Answer

How do I replace a ignition switch for a 1989 Cadillac deville


AutoZone Videos - Ignition Lock Cylinders

www.autozone.com/video/video.jsp?...Ignition+Lock...
AutoZoneFind Ignition Lock Cylinders videos at AutoZone.com. ... How to install an Ignition Lock Cylinder in a 95-2011 Ford. 14,972 views. Average rating of 4.4 out of ...

How to Remove and Replace an Ignition Lock Cylinder ...

? 5:13
https://www.youtube.com/watch?v=S9I4MnRIrHk
Sep 2, 2012 - Uploaded by RatchetsAnd Wrenches
How to remove and replace an Ignition Lock Cylinder on a 2003 Hyundai Elantra GT. If this video helped you ...

Aug 14, 2011 | 1989 Cadillac Sedan DeVille

1 Answer

Howto change a key cylinder for a chevy cobalt


There is a TSB on this issues if your having ignition lock issues.
Service Information
2009 Chevrolet Cobalt | Cobalt, G5 (VIN A) Service Manual | View All Bulletins | Document ID: 2325129

#09-02-35-005: Ignition Key Difficult to Remove, Ignition Key Binds or Sticks in Cylinder (Replace Ignition Cylinder) - (Aug 10, 2009)

Subject: Ignition Key Difficult to Remove, Ignition Key Binds or Sticks in Cylinder (Replace Ignition Cylinder)

Models: 2008-2009 Cadillac CTS (Built Prior to VIN Breakpoint 90163371)

2005-2009 Chevrolet Cobalt (Built Prior to April 14, 2009)

2006-2009 Chevrolet HHR (Built Prior to April 14, 2009)

2007-2009 Chevrolet Equinox (Built Prior to July 2008)

2005-2006 Pontiac Pursuit (Canada Only)

2006-2009 Pontiac Solstice (Built Prior to April 14, 2009)

2007-2009 Pontiac G5 (Built Prior to April 14, 2009), Torrent (Built Prior to July 2008)

Attention: This bulletin only applies to vehicle equipped with automatic transmission.

Aug 05, 2010 | 2005 Chevrolet Cobalt

1 Answer

Ignition key will not turn...It's in the lock position and the car is in park. 2004 Hyundai Elantra


Wayneard is correct. with one hand on the ignition key try to turn the key towards start. With your other hand hold the steering wheel and turn slightly in either direction. This will take the locking pressure off the ignition cylinder. To prevent this from re-occuring be sure steering wheel is in a straight position before removing key from cylinder. Then be sure not to use steering wheel as a lifting point to get out of the car. If you do the wheel will move into a locked position, which is what you are experiencing now. Keep me posted

Dec 19, 2008 | 2004 Hyundai Elantra

Not finding what you are looking for?
2009 Hyundai Sonata Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...