Question about 1992 GMC Jimmy
Have the ball joints checked or the wheel bearings for excessive play and repair as necessary.
Posted on Feb 12, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
could be a cv joint or ball joint ... jack up the vehicle... grab the wheel in the 9 and 3 position and see if you can move the wheel side to side.... tie rod if you can... then grab the wheel at the noon and 6 position... try to move the wheel up and down.... ball joint if there is much play in it.
CV joint quick test is just to go into an empty parking lot and turn the wheel all the way to the right and drive slowly... hear a ticking noise... then the left and listen for a ticking noise.
Posted on Jan 23, 2009
SOURCE: 1992 GMC Jimmy idles rfast
if this is a throttle body motor which probably is check for vacuum leak were the throttle body bolts on to the intake .the gaskets go bad after awhile .or listen to here a hissing sound try to locate and you might find a vacuum leak there.
Posted on Mar 18, 2009
SOURCE: I have a 1997 GMC Sierra.
Align the truck, sound like the camber is out of adjustment the upper control arm is holding it out too much, or your lower ball joint is messed up and lets it tuck in. The tie rods on that truck have nothing to do with it. Ball joints are like 40 bucks each for a good one, and an alignment is like 50. Is this a 4wd truck? If you have torsion bars make sure they are not too tight, when you hit dips its gonna distort the tire to the ground.
Posted on Jun 20, 2009
need more info what happens when you push the buttons? do you hear a click or feel the jimmy move at all. you may also hear it try to go in. I have been having trouble with my 4x4. will go into 4 low but not hi. I unhooked the battery for about a half hour and the 4x4 worked after that good luck
Posted on Dec 23, 2009
Tips for a great answer:
Jan 18, 2016 | 1996 Ford F150 Regular Cab
Apr 06, 2015 | 1991 GMC S-15 Jimmy
Mar 07, 2015 | 2000 GMC Sierra
Dec 23, 2013 | GMC Jimmy Cars & Trucks
Feb 23, 2013 | 1998 Ford Expedition
May 15, 2012 | 2006 Dodge Stratus
Dec 13, 2010 | 1994 Dodge Intrepid
Jun 21, 2009 | 1999 GMC Jimmy
Sep 15, 2013 | 1992 GMC Jimmy
155 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: