Question about Chevrolet Tracker

Open Question

Replace starter 2002 chev tracker 2.5 v/6 - Tracker Chevrolet Cars & Trucks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: tickin 2000 chev tracker

if its a ticking when you start from cold and goes away soon after start as the engine warms up it is most likely a crack in your exhaust manifold ( you may call it a header in the us) as it is getting the hot exhaust straight from the cylinder it heats up very quickly and closes the crack stopping the ticking. you should be able to get a nechanic to run a weld along the crack easily enough depending on where it is.

Posted on Aug 16, 2009

01fordeb
  • 1033 Answers

SOURCE: rear brakes on 2002 chev tracker squeal when

They may have become seized, which is when the brakes are hot, and you hit a water puddle, the water crystallizes the brakes. Thee will need replaced, if not it will tear up the rotor,

Posted on Feb 18, 2010

Dak408
  • 277 Answers

SOURCE: How do you replace the crankshaft sensor on a 2000

If you have doubts about doing this repair I suggest you let and Certified Mechanic (ASE) do the repairs its not and easy task



REMOVAL PROCEDURE

  1. Disconnect the electrical connector from the crankshaft position (CKP) sensor.
  2. Remove the transmission from the vehicle.
  3. Remove the flywheel or the flex plate from the crankshaft.
  4. Remove the 2 bolts (3) and the sensor wire harness clips or shield.
  5. Remove the bolt (4) securing the CKP sensor to the engine block (5).
  6. Remove the CKP sensor (1) and the wire harness (2) from the vehicle.
  7. Inspect the CKP sensor signal rotor for damaged or missing teeth through the CKP sensor opening.
  8. 0882f41.gif
INSTALLATION PROCEDURE

NOTE: Do not pinch or damage the CKP sensor wire harness between the engine block and transmission during the transmission installation. Observe that the CKP sensor wire harness remains properly located in the channel provided at the rear of the engine block during the installation.

  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Install the CKP sensor (1) to the engine block (5)
  3. Secure the CKP sensor to the engine block with the bolt (4). Tighten Tighten the bolt to 6 N.m (54 lb in) .
  4. Secure the sensor wire harness to the engine block with the clips or the shield and the 2 bolts (3).
  5. Install the crankshaft flywheel or flex plate.
  6. Install the transmission.
  7. Connect the CKP sensor electrical connector.
Good luck

Posted on Oct 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change bulb in instruments panal of Chev tracker 2002


You have to remove the instrument cluster from the vehicle and the bulbs are replaces from the backside.

May 22, 2015 | 2002 Chevrolet Tracker

1 Answer

Paint code for 2002 chev tracker exterior trim


It should be in the glove box on that plastic label, if not their try the front door where the hinges are if you still cant find it take your vin number and go to a GM dealer.

Feb 10, 2015 | 2002 Chevrolet Tracker

1 Answer

Paint code for 2002 chev tracker exterior trim


there is a small plate attached in the engine compartment that has the paint colour code stamped into it
The 54U may be the colour and you may have to go to a service dealer to have it explained.

Feb 10, 2015 | 2002 Chevrolet Tracker

1 Answer

How do I replace fan belt on 2002 4x4 automatic tracker


Haynes manual from your local auto parts store will tell you.

Jan 28, 2015 | 2002 Chevrolet Tracker

1 Answer

Rear brakes on 2002 chev tracker squeal when applied


They may have become seized, which is when the brakes are hot, and you hit a water puddle, the water crystallizes the brakes. Thee will need replaced, if not it will tear up the rotor,

Feb 18, 2010 | 2002 Chevrolet Tracker

1 Answer

My chev tracker 2001 right headlight goes out when i put the brites on. two new bulbs installed do the same thing. Jim


check and make sure voltage is going through dimmer switch sometimes they fail on one side

Nov 04, 2009 | 2002 Chevrolet Tracker

1 Answer

How do i release the tension on serpentine belt for replacement on 2000 chev tracker 2.0 eng suzuki engine


There should be a square1/2 inch hole most likely on the bar that leads to the tension pully, where you can put a 1/2 inch breakover bar or ratchet to depress the tension bar/spring, alowing the removal and replacement of the belt.

Oct 23, 2009 | 2000 Chevrolet Tracker

2 Answers

Where is the 16-pin data link connector on 2002 chev tracker?


IT IS LOCATED DIRECTLY UNDER THE STEERING COLUMN.

May 20, 2009 | 2002 Chevrolet Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...