Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi El Faraon,
I believe that you're dealing with 12 mm bolts and nuts....THESE ARE NOT THE SPECS FOR YOUR ENGINE, but I believe that if you use them you'll be close....Tighten in three stages up to 22nm....choose the bolts from the centre of the manifold and circle outwards until you reach the last one.....It may be a good idea to draw an overhead or plan view of the unit, marking out the bolt positions.....Start at the centre and mark the sequence and follow that....What is important is starting at the centre, so that nothing becomes warped....
Hope this helps,
Posted on Sep 06, 2008
The cruise has no dedicated fuse, you will most likely be looking to replace the clockspring rotating contact located under the steering wheel which connects the switches in the steering wheel (horn, cruise and air-bag) to the rest of the electrical system.
Posted on Apr 02, 2009
Here are the Positive Crankshaft Ventilation maintenance sections of the service manual for both the KA24DE (V4) & VG33E (V6). It doesn't really show where the valve is, but you can figure it out from the pics below. It's on the breather separator.
Posted on Aug 04, 2009
Have seen this problem before. You need to look under dash at brake pedal and find a blue switch with plunger contacting pedal, disconnect connector and jump with a peice of wire and drive to see if cruise works and if it does replace deactivation switch this should get you going.
Posted on Aug 26, 2009
V6 3.3L The sensor is located underneath the air intake manifold on top
of the engine block. This should take an experienced mechanic about 3-4
hours to replace.
Fig. Engine compartment component locations
Hope this help (remember rated this free help) Good luck.
Posted on Feb 08, 2010
Tips for a great answer:
Jul 15, 2017 | Nissan Cars & Trucks
Nov 14, 2013 | 2000 Nissan Xterra
Jan 16, 2013 | 2000 Nissan Xterra
Sep 10, 2011 | 2000 Nissan Frontier
Jan 15, 2011 | 2000 Nissan Xterra
Feb 09, 2010 | 2000 Nissan Xterra
Jun 17, 2009 | 2008 Nissan Xterra
Apr 02, 2009 | 2000 Dodge Caravan
256 people viewed this question
Usually answered in minutes!