Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the timing marks are as follows... if you are not able to see the picture the intake cam gear will line up with the mating mark on the rear cover .... the "I" needs to be straight up... the exhaust cam the E needs to be straight up. the crankshaft mark is a nothch in the rear of the crank gear which needs to line up with a pointer on the front of the aluminum oil pump housing. the keyway on the crank needs to be vertical. the marks on the rear cover are dimples in the cover. this is an interferance engine DO NOT ROTATE CRANK OR CAMS WITH BELT OFF. IF YOU HAVE BROKEN THE TIMING BELT DAMAGE TO ENGINE HAS ALREADY OCCURED AND YOU WILL NEED A VALVE JOB!!!! there is no exception on this engine. if you have tried to crank it over and the belt is broken the head is no good!
Posted on Jul 15, 2009
SOURCE: 1999 kia sportage timing marks
Crankshaft match marks
Align marks on timing belt pulley and pump body.
Camshaft pulley alignment marks
Posted on Jul 26, 2009
There is a DOHC or SOHC (double or Single overhead cam engone. Both are Similar. Both have a notch on back side of crank pully that aligns with a tab on engine just above crank pully looks like a triangle with the tip near crank pully is rounded off. SOHC engines have an arrow on cam pully that aligns with a point at top of timing belt rear housing. about straight up at top of it. DOHC have an I and an E on the cam pullys I for INTAKE and E for EXHAUST. the I and E match up at same type points on top of rear Timing belt housing. When installing belt make sure you do not move pullys. put belt on starting with cam shaft (s) then down to crank on tension side which looking at motor will be the right side or Clockwise direction keeping it tight no, or EXTREEMLY little slack. then back up around tensioner. Tensioner should be the last pully to go around. Once on make sure timing marks still lline up.Adjust tensioner and. rotate engine BY HAND 4 times and re check marks.
Posted on Oct 09, 2009
Tips for a great answer:
Oct 22, 2014 | 2007 Kia Sportage 2.0
Mar 02, 2013 | Kia Sportage Cars & Trucks
Sep 08, 2011 | 2001 Kia Sportage
Sep 04, 2011 | 1995 Kia Sportage
Aug 16, 2010 | 2001 Kia Sportage
Jul 26, 2009 | 1999 Kia Sportage
77 people viewed this question
Usually answered in minutes!