Question about Chevrolet TrailBlazer

Open Question

2002 chevy trailblazer bell housing bolts

HHow to get to the top bell housing bolts

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: 2002 Chevy Trailblazer Engine Codes

This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.

Posted on Aug 16, 2008

  • 37 Answers

SOURCE: locate camshaft sensor 2002 chevy trailblazer

Assuming you have a 4.2L engine here is the location.

Hope this helps out,
if so please rate my answers.

Posted on Mar 19, 2009

  • 4 Answers

SOURCE: what is the torque specifications on a 1995 chevy

transmission to engine is 32ft lbs but is normaly tighten alot tighter you can't screw this up tighten really tight

Posted on May 08, 2009

  • 46 Answers

SOURCE: 90 F250 7.5L e4od what

Swivels and extentions

Posted on Sep 14, 2009

  • 540 Answers

SOURCE: 2008 Chevy Trailblazer Oil filter location


Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wen i have door open and key in the ignition playing the radio.i wont to no how can i disconnect the dinging bell altogether. 2002 chevy trailblazer.

If you have a factory radio, you might be able to threw the radio. Get to the menu and personalization part. If not, you can remove the key in switch on top of the lockset, in the steering column. Small white switch on top.

Sep 11, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

How to remove top transmission bolts on a 2002 ford explorer

You will need two "special" tools. First a long (36" or so) extension, preferably 1/2" drive, and a swivel impact socket. All of the bolts around the bell housing are the same head size. I believe a 13mm. The way it is done is that you remove the transmission mount and let the trans hang down to give you more room, then use the long extension and swivel socket to reach the top 2 bolts.

Feb 16, 2015 | 2002 Ford Explorer

1 Answer

Where is crank position sensor on 2002 chrysler town andcountry

the sensor is located in the trans bell housing were the trans bolts to the engine, there is a 3 wire electrical connector. I believe its on the top of the bell housing on the firewall side.

Aug 28, 2014 | 2002 Chrysler Town & Country

1 Answer

How to remove bolts out of 2003 for removal of transmission

If you are talking about the two bolts on top of the bell housing. You will need a three foot extension with a swivel and 15 mm socket. To access the top bolts you need to put your jack with a piece of wood under the transmission pan, jack it up just enough so you can remove the rear cross member then slowly lower your jack supporting the trans. Until you see those top bolts approx. Three inches assuming you have removed all the other bolts on bell housing and the three bolts that attach the flywheel to the pumpkin.

Apr 25, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

Replace Slave Cylinder 2002 VW transporter

The heading is replace slave cylinder of 2002 vw transporter. Why would you be removing the tranny to do this job as the slave cylinder is on the outside of the bell housing. IT is normal to remove the bell housing with the tranny as they are normally one unit as the bolts are inside and cannot be reached until the tranny is on the ground. Having said that, if there are 4 bolts in a flange outside the tranny proper and the bell housing is tightened with these bolts then you can remove the tranny separate to the bell housing.

Nov 25, 2013 | Cars & Trucks

1 Answer

A cannot get the top center bolt out of the bell housing into the engine block on my 4l60e transmission in my 2001 chevy silverado 4x4

to remove the upper bell housing center bolts on a 4L60E (not an E if it's 4wd by the way but we'll go with that for now)
you will have to unbolt the transmission from the crossmember and drop it down which will in turn tilt your motor back and allow you better access to those two top bolts. Put your two bottom bolts back in finger tight before you drop the transmission down though or you stand the chance of breaking the bell housing when it's tilted back. you can also use a floor jack on your crank pulley on the front of the motor. Jack up on it and the motor will tip back but not if you have the transmission bolted in place still. hope this helps

Feb 22, 2013 | Cars & Trucks

1 Answer

How to replace the thermostat on 2002 chevy trailblazer 4.2 liter?

Follow the top radiator hose from the radiator to the engine, and the thermostat should be in the housing at the other end of the hose. Unbolt the 2 or 3 bolts on the hosing, scrape off the remains of the gasket, install the new thermostat and gasket, replace the housing, and tighten down the bolts. Refill the cooling system and drive.

Sep 10, 2011 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

Will a transmisson out of a 2005 chevy trailblazer fit in a 2002 chevy trailblazer

Most likely if they are both 4 speeds. There is a code on a sticker on top of trans. the first digit is the year and the other 3 are the model ( calibration and such). for example 2HCD and 5HCD are the same models just different years.As far as i know the 6 speeds were not availiable till 06 or 07 so you should be fine.

Jan 12, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

2002 Chevy Trailblazer Engine Codes

This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.

Jul 06, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides