Question about 2009 Ford Focus 1.4

Open Question

How to change spark plugs in a 2009 ford focus

Need location and if it requires any special tools

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
basilfawlty
  • 39 Answers

SOURCE: water pump

About 8, if you are methodical you should be ok. You will probably have to remove the cam belt. If you do you need a tool to hold the cams-the tool is basically a flat plate +/- 400 mm long and about 6mm thick which slots into the rear of the cams when engine is in the correct position and on tdc.

Posted on Jun 10, 2008

Ad
  • 10 Answers

SOURCE: change front wheel bearing 2001 ford escape.

you need to remove the spindle assy from the truck & press the bearing out & in   or you need to use a tool called the hub tammer to remove & install the hub bearing

Posted on Jun 28, 2008

  • 97 Answers

SOURCE: need size of battery for 2000 ford focus

Dependant on engine size and fuel type, any size from a 390 amp battery, if it is diesel then a 590 amp battery. No special tools needed, only a small ring spanner. Make sure yyou disconnect the earth lead first. Also you will need to enter the radio code after changing batteries

Posted on Apr 06, 2009

planet-x
  • 232 Answers

SOURCE: how to change the spark plugs on a 1.6 zetec ford

get a plug spanner (more a socket than a spanner) and after removing the plug lead, use the spanner to remove the plug. Do one at a time so you dont get the leads mixed up or it will not start.

Posted on Dec 06, 2009

  • 1757 Answers

SOURCE: timing marks for 2000 ford focus

Click on the following direct Link.
With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft Alignment Tool.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/focus/2000_ford_focus_timing_belt_diagram_marks.htm

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you take off the engine cover of a 2006 Buick La Cross? Cant locate spark plugs to change them with this cover on. Do I need a special tool to get it off?


no special tools required , but getting to the plugs is a lot easier from the under side of the engine on a hoist

Aug 10, 2016 | Buick Cars & Trucks

1 Answer

Where fuse box is located, internal, on 2004 s-10 auto volvo


Hi Debra, The fuse box for the Volvo are on the passenger side end of the instrument panel behind the cover....the passenger door will have to be open to access it and it is just prised off with a small screwdriver, the fuse removal tool should be inside and the fuse list should be on the reverse of the cover but I think it is No 13 fuse you need to replace!

Oct 24, 2014 | Cars & Trucks

1 Answer

I need to change the front brakes on a 2001 BMW Z3 3.0...any special tools required for that? I've done lots of brake jobs, but never on a beamer...thanks!


NOPE NO SPECIAL TOOLS JUST REMOVE BRAKE PAD WEAR INDICATOR CONNECTOR.REMOVE THE CALIPER GUIDE BOLTS AND THE SPRING CLAMP.TURN UP THE CALIPER AND REMOVE THE BRAKE PADS.THE INNER PAD IS LOCATED WITH A SPRING IN THE PISTON.

Oct 25, 2010 | 2000 BMW Z3

1 Answer

Fuel pump replacement, location and tools needed please


the fuel pump is located inside the fuel tank, the fuel tank must be removed to replace it, u will need a good hydraulic floor jack and safety stands to support the car, no special tools are required except the jack, just a really good set of hand tools, 3/8" ratchet and sockets, both deep sockets and shallow, metric and SAE.

Jul 02, 2010 | 1997 Oldsmobile Aurora

1 Answer

I want to replace the oxygen sensor in my 1993 honda accord ex, where is this located and does it need special tools


it is located at the exhaust pipe before the catalyt converter. No special tool required, normal spanner will do, make sure the exhaust pipe is not hot...disconnect the electrical cable connected to the sensor first. Spray WD 40 or lubrication to the thread before unscrew the sensor.

Jun 04, 2010 | 1993 Honda Accord

1 Answer

91 chev corsica location of starter, any special tools needed


Nothing special about the tools but you will need to make sure you add the shim correctly

Feb 02, 2010 | 1991 Chevrolet Corsica

1 Answer

Where is teh fuel filter located on my 99 yukon


The fuel filter is located under the vehicle on the inside of the frame rail,drivers side.no special tool is required. A 5/8 line wrench to break loose the fuel lines. There is one bolt that holds the bracket to the frame you'll have to remove. Use caution due to fuel pressure on the line.

Jan 29, 2010 | 1996 GMC Yukon

1 Answer

Broken front axel on 96 chrysler sebring Lxi. Need tips on removal and installation plus special tools required


Buy a Haynes auto book from your local auto store and follow the steps if you are somewhate mechanically inclined you can do it. basic auto tools required and if you need any special tool autozone will lend them for free Deposit required hope I helped

Sep 07, 2009 | 1996 Chrysler Sebring

1 Answer

How do I change the spark plugs on a 2000 Beetle.


No special tools required. Spark plugs or glow plugs mount down into the engine from the top. Last resort - follow the wires. Be careful when changong the plugs such that you don't break any of the wires. The wires are somewhat expensive, and break easily.

Jun 16, 2009 | 2000 Volkswagen Beetle

2 Answers

Control arm bushings


Special tools are required. Definitely not for the novice. An alignment will be needed after the required work is performed

Apr 03, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
2009 Ford Focus 1.4 Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5685 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...