Question about Plymouth Sundance
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first thing you need to do is get a new belt that belt dressing just destroyed that belt that stuff is no good then get a new belt tensioner clean all the pullys with some brake clean then install the belt tensioner and belt if its still sqealing there maybe a pully making the noise to check that when you have the belt off spin them by hand and listen to them and feel for any play in the bearings
Posted on Jul 19, 2009
There should be a drawing of it on the front cross member at the front of the car. Mine is, I have the manual in front of me but like you say, there are quite a few different versions, I`ve just changed the serpentine belt on my chrysler grand voyager 2.5CRD diesel because the alternator froze up and wrecked the belt. It was a very simple job because the drawing was on the front cross member of the car. Let me know the engine and I`ll try to explain the routing to you. Ian
Posted on Jul 24, 2009
Unsure what engine or Vin Number is for your Car. All 0f the diagrams looked the same for the 2.2 - 2.5 and others, with and with out turbo.
Hope this helps, - Jarett
Posted on Aug 17, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
Posted on Feb 08, 2010
Tips for a great answer:
Mar 14, 2013 | 1993 Plymouth Sundance
Mar 04, 2011 | 1994 Plymouth Sundance
Dec 16, 2010 | 1991 Plymouth Sundance
Jul 10, 2010 | 1994 Plymouth Sundance
Jul 01, 2010 | 1994 Plymouth Voyager
Jan 13, 2010 | 1994 Plymouth Sundance
Sep 15, 2009 | 1994 Plymouth Sundance
Mar 01, 2009 | 1994 Plymouth Sundance
Aug 18, 2008 | 1990 Plymouth Sundance
289 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: