Question about Cars & Trucks
Posted by Anonymous on
Take off air box, then there are 4 bolts on the upper case to be removed then the 8 10mm bolts on the manifold ( 3 at bottom 1 at each ent top and 3 tucked in under the manifold.
there are also 2 cables to be removed from the throttle body also.
Hope this helps.
Posted on Jul 24, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: renault clio 1-5 dci (2002)
It's very likely a valve stem seal that has split. This will allow oil into the cylinder from the crank gallery.
Off with it's head! I'm afraid.
The only other thing it can be is overfueling - but then it will be sputtering and lagging on acceleration.
You can check which cylinder is affected by removing the plugs and looking for the oily one. They will all need replacing really as it's false economy to do just 1. The seals are cheap. I would get a new cambelt fitted at the same time - as it has to come off anyway.
(If this leads to a solution, please take the time to rate as Fixya! - Thank you)
Posted on Jun 17, 2008
32 psi in the front and 30 psi in the back. if the tyre preasure monitoring is acting up even with the preasures ok. take the car to a renault garage to have them re initialised
Posted on Aug 22, 2008
first let me know year, engine code (or at least typ of engine 1.2, 1.4...). and I will send you picture for timing belt.
and it will (did) bend valves, so you`ll have to remove cilinder head *** well.
Posted on Nov 21, 2009
hi from uk unfortunately your assumption is correct! you do have to 1st remove the p/steerpump belt to be able to change/renew the alternator belt not too difficult just a little patience needed and a few bandaids/plasters ? for the scratches on hands if you have large ones as i do ?
Posted on Dec 08, 2009
the cambelt timing marks for clio 1.4 are = the crankshaft cog alignes withmark at 6 o/clock position at TDC No 1 cyl and the cam cog alignes with mark on cyl head at rear of cog at 12 o/clock position belt is fitted anti clockwise from crank then w/pump and then cam cog hope this helps ?
Posted on Jan 13, 2010
Tips for a great answer:
Jan 23, 2017 | Renault Cars & Trucks
Mar 17, 2016 | Renault Cars & Trucks
Mar 14, 2016 | Renault Cars & Trucks
Aug 07, 2010 | 2006 Renault 181
Jul 21, 2010 | 2005 Renault R5
Nov 21, 2009 | 1986 Renault Sport
Nov 02, 2009 | Renault Sport Cars & Trucks
Jan 17, 2009 | 2005 Renault 181
332 people viewed this question
Usually answered in minutes!