Question about Citroen Xsara

Open Question

How to remove ignition barrel from citroen picasso

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcgyver468
  • 710 Answers

SOURCE: Removal of the ignition Barrek

HAVE YOU TRIED TO USE SOME SILICONE SPRAY ON THE NUT? MAYBE YOU CAN CUT THE NUT OFF WITH A DREMEL AND A VERY SMALL DIAMOND BIT WITHOUT CUTTING THE DASH. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

Posted on May 03, 2009

  • 135 Answers

SOURCE: I HAVE A MERCEDEZ 190 AND THE KEYS ARE NOT TURNING

it is better to buy a new ignition barrel.it takes a special socket to get the screws out, once the screws are out they do not need to be replaced.buy new barrel,disconnect negative battery cable,disconnect wires from barrel assembly, remove barrel from colum. first take vin# to dealership parts department to get correct barrel assembly, the keys with new assembly will fit doors and trunk

Posted on May 20, 2009

  • 4 Answers

SOURCE: mercedez 190 ignition barrel. I have taken out ignition barrel attached to steering coloum but i can not remove key ignition from steering coloum how does it remove ignition barrel from steering

Should be the same as w123 model. Check diy Mercedes web page.
Photos included easy to do.

Posted on Jul 07, 2009

Ironfist109
  • 3018 Answers

SOURCE: how SERVICE LIGHT RESET for

  • Remember that light means it's time for a service on your vehicle. Oil change mainly. To reset the service indicator light follow these steps.

  1. Switch off the ignition.
  2. Now turn the ignition to "S" for steering lock.
  3. Next press and hold the "A" button.
  4. While holding the "A" button start the ignition and continue to hold the "A" button until the screen goes to ")" and the light goes off.
  5. Switch off the ignition and the resetting of the light is complete.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Posted on Jul 10, 2011

Testimonial: "thanks for your help"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When indicator light shows both arrows not single


CITROEN XSARA PICASSO questions and answers

www.roadtestreports.co.uk/cars/citroen/xsara-picasso/qanda/
Results 1 - 40 of 914 - Help and advice on everything CITROEN XSARA PICASSO. ...fitted.. citroen do two variants.. one with pads and one with shoes. ... Hi when I turn side lights on my indicators start flashing and ... Both bulbs are OK, but light is of. ...our 2006 Picasso just wondering does yours go past 50mph if not then it ...Missing: arrows

CITROEN questions and answers - RoadTestReports.co.uk

www.roadtestreports.co.uk/cars/citroen/qanda/
One more thing the clutch is nearly gone but this wouldnt cause the noise. ... My horn keeps going off randomly in my Citroen C1 hatchback car ( 2006 ) when I ..... MyCitroen Xsara Picasso`s air bag warning light comes on but not all of the time. .....box Citroen C3 - two boxes will show, both fit, choose the £48.9 one + £5.00 ...

Jan 11, 2016 | 2006 Citroen Xsara Picasso

1 Answer

How do I replace the front NS coil spring on 2001 picasso 2.0 HDI


Here is a video on you tube showing how to replace the front suspension on a Picasso. KYB Front CITROEN C4 Picasso C4 Grand Picasso

Feb 21, 2015 | 2001 Citroen Xsara Picasso

1 Answer

How do I replace the gearlever knob on a Citroen Picasso 1.6hdi;?


I had the same trouble with a Renault Megane. After reading on forums it turns out it only needs pulling upwards. Mine was well and truly stuck on but did eventually pull away. Citroen, Peugeot and Renault seem to share a lot of characteristics. If in doubt ask a citroen dealer and just persevere with it.

Sep 17, 2014 | 2008 Citroen C4 Picasso

1 Answer

How can i remove a citroen picasso ignition barrel without having a key


Very,very difficult. Bear in mind that there is an RFID sensor near the barrel that is used by the immobilizer system. If you can turn your key one notch between OFF and ON, then the locking pins can be pressed in and you can pull the barrel out. If not, your need to remove the whole steering column and do a lot of drilling/grinding to remove the locking pin.

Sep 06, 2014 | 2001 Citroen Xsara Picasso

1 Answer

What tool is used to open the head bolts on a citroen xsara picasso


Special tool like Torx key. Use the ones that can be inserted into a size 10mm bolt socket. I think it's size T50.

May 03, 2014 | 2004 Citroen Xsara Picasso

2 Answers

How to remove picasso heater


heater resistor?
heater moor?

what you want to take off

Feb 09, 2014 | 2004 Citroen Xsara Picasso

1 Answer

Back door on citroen xsara picasso wont open


door unit as packed up so you will need to some how remove door card to see not for the faint hearted this one it will need some skill

Feb 16, 2013 | 2001 Citroen Xsara Picasso

1 Answer

Picasso heater blower not working


Hi all. Yes this is a very common issue. 2 distinct issues in fact are common with the aircon.
1 you get fan on certain settings only. This is the resistor gone and johnjohn2 has identified the fix for this above. This is usually (although not always not intermittent and so you will usually lose all other settings over night and they don't come back
2 you get no fan activity at all. This starts to happen intermittently and then gets more frequent until the fans won't work at all. The fix for this is expensive through Citroen but cheap if you get the part off ebay. It is the ignition switch cable which has a fault. A very common issue. You need to remove the ignition switch and replace the cable from it. Work is not long but plugs can be tight and fiddly.
here is the link for the part
http://www.ebay.co.uk/itm/Ignition-Switch-Cables-Wires-PEUGEOT-206-CITROEN-XSARA-PICASSO-Lock-Barrel-Plug-/121038091531?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c2e6eb50b
good luck

Oct 18, 2012 | 2001 Citroen Xsara Picasso

1 Answer

Citroen picasso egr valve needs cleaning


by taking the car on high way / motor way
hard drive for minimum 20-30 mins in lower gear.

Jul 02, 2012 | 2005 Citroen Xsara Picasso

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14195 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...