Question about Mitsubishi Eclipse

Open Question

How do you open the rear door on a shogun from inside with no door handel

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 40 Answers

SOURCE: door handel won't open door.

Typically in order to remove the actual handle from the door, you must first remove the door panel. When removing the panel, at first do not disconnect your window switches, as you will need to roll up the window in order to accsess the door latch. Once the window is up and all of the door panel compnents are removed, you will likely see a plastic cover of some sort that seperates the door panel from the metal part of the door. You will also need to remove this. Afterwards there should be room enough to look inside the door and see the door latch from the inside. There should be a couple of screws/ bolts holding the assembly together. There will be a series of rods that connect to the latch. The mechanism the opens the door from the outside connects to these rods with a plastic clip. You will likely need to replace that clip to solve the problem. This is a fairly easy task, however, due to the confined space, it will be time consuming.

Posted on Oct 17, 2008


SOURCE: door won't open with handel.

which door is is ,. becuase it could be the child safety lock

Posted on Apr 05, 2009

SOURCE: Something iside the door gave out outside handel doesnt work just

Follow the screws on the inside of the door. There will be several to find and then you can remove the inside door panel cover.

Posted on Jun 29, 2009

  • 7 Answers

SOURCE: I have a Ford Fiesta 02 my car door wont open

The push rod from the outer handle to the lock/latch came off the door handle. You need to pop off the door panel (get a panel tool set at the auto parts store) and you'll be able to see into lock area and you'll see a rod with a "L" doing nothing. Put it back in the hole on the lock/latch and snap the keeper back on(it's probably in the bottom of the door)if no keeper, you can get one at a good auto parts store.

Posted on Jun 02, 2010

  • 2 Answers

SOURCE: y reg 307 passenger door

I have the same problem with 2001 model. The rubbish peugeot design means that while the door is locked shut, there doesn't seem a way to get the door card (panel) off to get to the lock mechanism, because the screws holding the panel are in the part of the door that is shut!! Ughhhhhhhhhhhh ..... Anybody know any different?

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2009 altima s driver's side door wont open from inside or outside thought door was frozen shut so pulled handle hard to try and open now cant open door

You will need to take inside door panel loose which is a little hard with door shut but it can be done and probably replace door Handel if the Handel it's self is not broke it's most likely just a little plastic clip that holds the rod to the lock

Feb 03, 2015 | 2009 Nissan Altima

1 Answer

1992 ford Econoline van neither side or rear doors open not with key or door Handel's can Handel's to both be disconnected and can I reconnect

Handel was a composer of baroque-era classical music.
A "handle" is something you grab onto.
Also, it's only necessary to ask your question ONCE. You do not need to post the same question over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over and over, etc.

Jul 22, 2014 | Cars & Trucks

1 Answer

Jetta Volkswagen 1987 mercury door


Aug 12, 2012 | 1987 Volkswagen Jetta

1 Answer

Rear outside door handle doesn't flush with the door,it also doesn't open the door.

it could be broken inside the door panel side of the handel. take the door panel off and check handle

Aug 20, 2011 | 2006 Mercedes-Benz ML-Class

1 Answer

My 2005 Nissan pathfinder has lock problems, the rear doors are locked and will not open from both inside and out!. the outside handles are flapping around and have no resistance when trying to open from...

its most likly not a door loock problem its probally a cable issue if the handel inside attaches via cable and its wrong best solution is to pop pannel off inside

Sep 28, 2010 | 2005 Nissan Pathfinder

1 Answer

1996 jeep cherokee has seat belt stuck in driver side door and can't get door open

hold up the handel and hit your hip against it kinda hard have someone get inside hold up handel and hit there shoulder out Ward hold up both handles make Shir you unlock it mite take a couple of times

Jan 25, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Driver side door wont open.solution on opening the door

This is usually caused by a broke plastic retaining clip.the inside handel should have a insert covering a screw pop out the insert and remove the screw. If there is no rod atached to the handel (broke clip) locate the rod in the door (a metal coat hanger works good) pull on the rod towards the front of the door and it should open.Replace the clip or sometimes the handel itself breaks needing replaced.

Hope you get a handel on it!!

Oct 23, 2009 | 1993 Honda Accord

1 Answer

Door doesnt open

Now when you say frozen locked is it when you open it from the inside you want to get out because if its that I believe there should be a small switch button on the door near the catch latch (only if you can open this door from outside handel) for a child safety lock switch flick it the other way (only 2 way this switch works lock and open) and it should open from inside (if it wont open from inside and outside then the door handel trigger is either come off the only way check it is open the door cover and look if anythng has come off) hope it give some help

Sep 16, 2009 | 2004 Porsche Cayenne

1 Answer


using small hook tools and tack pullers shaped like mini wonder bars, you can remove the door panel. once removed, you can fish around on the bottom middle of the door and pull the cable to unlatch the door.

Apr 14, 2009 | 2001 Toyota Sequoia

1 Answer

Driver side Hatch will not release. Passenger side opens.

At the center of the rear door is a actuator that has rods that go to both side and the clip felloff/broke on the Driver(left)side if it has a handel on the inside if you take that apart you can then pull the inside skin back far enough to pull the rod with a pliers and open the door and then make the repairs

Apr 11, 2009 | 1997 GMC Safari

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides