Question about 2006 Mercury Milan

Open Question

My gear shift is stuck in park

It does not move out of park when engine is on it only move out of gear when i press the shift release button on the gear panel

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: My 2003 Mercury Mountaineer Gear Shift is stuck.

See if u have brake lights. This is what energizes the shifter solenoid. There are 2 fuses u can check both are in the under dash fuse panel. Fuse 23 (15amp) and fuse 26 (7.5amp).
To get it out of park turn igntion switch on stopping just short of engerizing the electronics then u should be able to get it out of park and into neutral.

Posted on Feb 01, 2009

  • 218 Answers

SOURCE: My 2003 Mercury Mountaineer Gear Shift is stuck.

THERE IS A SENSOR ON THE BRAKE PEDAL THAT RELEASES THE THE SHIFTER.THERE A 3 COMPONENTS INVOLVED.U CAN PUT IT IN NEUTRAL BEFORE U START THE CAR.THEN WIL SHIFT.

Posted on May 01, 2009

  • 1 Answer

SOURCE: 93 Mercury Tracer will not shift out of park.

This is probably happening because, underneath your shift console, there is a lever that keeps you from shifting from park without the keys in. The best way I found to fix this was, there are 6 screws, that keep you from getting to it, they are pretty visible, two right in front of the passenger and driver seat, 2 closer to where your feet would be if you were sitting in those seats, and two at the back of the e-brake console. Take this entire plastic off and you'll find that when you sit in your passenger seat, you can see a piece that is most likely dirty from spilled drinks and such, and if you push it, it may not budge, this is a solenoid, this is that piece that is keeping you from shifting from park, I recommend keeping and cleaning the solenoid if your solenoid is not completely corroded, in my case, I had to just destroy the entire thing.

The reason that solenoid piece is why you can't shift from park is because you have that solenoid piece, underneath your shifter, and when you push the button, it's hitting the solenoid. The reason for this is, the fact that your shifter uses a small cylindrical piece to guide and stay in gears, and that small cylindrical piece is probably hitting your solenoid.

Posted on Mar 25, 2009

alicantecoli
  • 22114 Answers

SOURCE: my mercury will turn on fine, but i can't move the

change the stop light switch

Posted on Jan 08, 2010

csmock132
  • 4669 Answers

SOURCE: I cannot shift my 98 Sable out of park into a gear

Sounds like a problem with the brake light switch. Do the brake lights work? It is a problem with the shift interlock system. It is controlled by the brake light switch on the brake pedal bracket.

Posted on Aug 02, 2010

Testimonial: "Actually the brake pedal switch must have been kicked so it was not aligned properly. A little realignment, no tools needed and everything works fine"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Shifter stuck in neutral shift lock release button will not push in to shift in gear


shift lever does not move out of the PARK position with the ignition ON and the brake pedal pressed ?

Jan 18, 2015 | 2006 Chevrolet Trailblazer

2 Answers

2010 dodge grand caravan stuck in park with engine on


Check your brake lights, if the system doesn't get a brake lights on signal it will not release park, it is called the park lock system.

Nov 01, 2012 | 2010 Dodge Grand Caravan

1 Answer

It's hard to explain, but i will in the best way i can. . . One morning when i started my car, i tried to press the gear thing in but it was stuck, so i kept trying and it finally went in. And once I...


Okay, you are correct, the key is stuck because of the shifter lock wont release, the most common reason is its stuck, you will need to remove the covering around shift to get to shifter lock release solenoid, there you will clean and lube it, you will need to move it by hand as you spray wd40 on the arms, you will see how it work by pressing the shift release and you will see to lever that gets pushed, it wont move because its stuck but you will see the levers move inside, hope this helps, good day.

Sep 03, 2011 | 1999 Mazda Millenia

2 Answers

Gear shift stuck in park


The BTSI (Brake Transmission Shift Interlock) has a small spring retainer on the park safety. A small plastic tab breaks & releases the spring. This requires the shifter to be disassembled in order to be repaired.

Repaired mine Sunday May 1st and can provide detailed instructions if desired.

If you are lucky, your brake interlock is the only problem. There is a bypass switch located beside the gear selector. Remove the small "cubby" bin located next to the gear shift by simply lifting up to remove. You will note a small access port and a pink button contained therein. Press the pink button to override the brake interlock.

If you still cannot shift into park, then the shifter must be removed for the spring repair. Even if yours is still under warranty, you will get another shifter that will eventually fail due to poor engineering.

Please let me know if you would like my assistance.

Apr 18, 2010 | 2005 Dodge Magnum

1 Answer

1999 Buick Regal GS gear shift knob button is stuck to release


Check in your fuse panel. The top first row and the first fuse. I took that fuse out and had the same problem. My gear shift button was stuck. I put the fuse back in and it worked.

Mar 31, 2010 | 1999 Buick Regal

4 Answers

Gear shift stuck


I am having the same problem with my 05 Altima. For a temporary rememdy we took stuck a key down into the release hole in front of the gear shift. There may be a little cover over the hole, but if you take it off and stick something in it, it will release the shifter.

Aug 12, 2009 | 2006 Nissan Altima

2 Answers

My gear shift is stuck and will not move from park to reverse. I had backed out the car and turned it off. when I went to move the car, my gear shift will not move out of the park position.


do the brake lights work? the system has a lock out that keeps you from moving out of park unless the brake circuit is activated, hence no brake lights no park lock out release, if the brk lights do work u most have a stuck or defective park lock out solenoid.

Jun 22, 2009 | 2005 Chrysler 300

5 Answers

GEAR STUCK ON PARK AND WON'T MOVE


I think your brake shift interlock solenoid is not releasing the Park position when you apply the brake.

Check for a blown fuse first. see owner manual for location of fuse.

Also, check owner manual for how to manually bypass the interlock.

When you step on the brake pedal, it activates a solenoid that unlocks the shift linkage cable so it will move. It is a safety feature to ensure you have you foot on the brake and not the gas, as you shift out of park.

please rate highly if this helps.

May 10, 2009 | 2003 Nissan Sentra

2 Answers

Gear stick stuck!


Are you pressing down on the brake padle when you are trying to get it out of park? If that don't work check the fuses & there may be a relay that's may be related to a safty divice to the stick shift. If you don't press the brake padle the stick shift will not release so if you leave the car running a child could not push in gear. The lock silinoid is at the gear console

Apr 24, 2009 | 1993 Volvo 240

3 Answers

2006 Chevy Impala stuck in park


When you turn ignition on it releases a cable that is attached to the shifter also the shifter has a solenoid attached to it that is released when you step on the brake. Both times that I had the problem of button stuck and cant shift out of park the solenoid was sticking and wouldnt release .

Dec 20, 2008 | 1998 Land Rover Discovery

Not finding what you are looking for?
2006 Mercury Milan Logo

Related Topics:

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...