Question about 1997 Nissan Skyline
First soak the hell out of it with penetrating oil, measure the diameter of the hole and go down to a parts store and ask for an "easy out" just tell them the diameter of the hole and they will give you the right one. the way they work is easy, just drill a small hole into the center of the stuck bolt tap in the easy out and slowley turn it out, try applying heat as you do this. also if there is any threads poking out of the hole you can "double nut" it to get it out pretty much you just thread on two nuts then with an end wrench turn the top nut clockwise and the bottom nut counterclockwise to remove it. if theres not enough room for two but there is for one you can either put red threadlocker on a bolt, run it down then give it time to set and try turning it out. or run down a nut and then tack weld it into place then turn it out.
Posted on Feb 12, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: