Question about BMW Cars & Trucks

Open Question

What should i do to fix my 2005 745 li which read the code p0507

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to fix a dtc p0507?


A vacuum leak Leaking air intake after the throttle body EGR valve leaking vacuum A faulty positive crankcase ventilation (PCV) valve Damaged/failed/dirty throttle body Failed EVAP system Failed IAC (idle air controller) or faulty IAC circuit

Sep 28, 2015 | 2005 Nissan Altima

1 Answer

Hy is there a code p0507? and how do i fix?


This P0507 code is one that's sometimes triggered on vehicles that have electronic throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set. A P0507 DTC trouble code may be caused by one or more of the following: A vacuum leak Leaking air intake after the throttle body EGR valve leaking vacuum A faulty positive crankcase ventilation (PCV) valve Damaged/failed/dirty throttle body Failed EVAP system Failed IAC (idle air controller) or faulty IAC circuit. This DTC is more of an informational code, so if there are any other codes set, diagnose them first. If there are no other codes, inspect the intake air system for air or vacuum leaks and damage. If there are no symptoms other than the DTC itself, just clear the code and see whether it returns. If you have an advanced scan tool that can interact with the car, command the idle higher and lower to see if the engine responds appropriately. Also check the PCV valve to see if it's blocked and needs to be replaced. Check the IAC (idle air controller) if equipped, verify it's operation. If available, try swapping in a new throttle body to see if that fixes the problem. On Nissan Altimas and possibly other vehicles the problem may be fixed by having the dealer perform an idle air relearn procedure, or other relearn procedure


Jul 27, 2014 | 1999 Daewoo Leganza

2 Answers

Code p0507


possible causes are:

Dirty throttle body
Electric throttle control actuator incorrectly adjusted/faulty/damaged
Air leak on Intake
Poor electrical connection to the Intake Air Control valve

P0507 KIA Idle Air Control IAC System RPM Higher Than Expected

May 14, 2014 | 2003 Kia Sedona

1 Answer

Check Engine Light came on - code reader read out error codes


make sure your lighter fuse is not blown. sound funny but thats a common prolbem on chevys

Dec 26, 2011 | 2001 Hyundai Elantra

1 Answer

2001 Hyundai elantra - trouble codes P0442,P0507,P0455 and NO DTC


you can look up these codes on actron.com or google that code

Dec 26, 2011 | 2001 Hyundai Elantra

1 Answer

Hi, I have 2004 Nissan Altima and Service Engine soon light is ON since last few days, today i went to AutoZone and then found Error Code P0507 So can you please suggest how to reset this light? and...


the dreaded P0507, have you had your throttle body cleaned lately? I did clean a neighbors TB while doing other maintenance things to it, and this popped up-and it was miserable getting rid of it. You have to do a 'relearn' procedure (about a million times or so, it seems) and DO NOT take it to a dealer-they will just charge you $100 and tell you to install a new throttle body (not cheap). They know this is a problem, and act like you have done something wrong for merely cleaning a dirty TB. It can and will go away if you do the 'relearn' procedure-read this post for information on how to fix it. it is just annoying but does not have to cost anything to correct. His took MONTHS to reset, but it did, and I did a lot of research on this and can assure you it is not what the dealer would have you think it is-they will try to separate you from your money for this code. read this:

http://www.nissanclub.com/forums/2002-2006-nissan-altima-discussion-2-5-3-5/243119-p0507-idle-control-system-rpm-higher-than-expected.html

Sep 05, 2011 | 2003 Nissan Altima

2 Answers

My monte carlo has code p0507 what is it and how can i fix it


possible causes
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
solution !!!
If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replaced the Electric Throttle Control Actuator (Motor) to repair the problem.

Jan 28, 2011 | 2000 Chevrolet Monte Carlo

3 Answers

Code P0507


P0507-- idle speed high

Jun 02, 2008 | 2001 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...