Question about Cars & Trucks

Open Question

Finding & changing the fuel filter,petrol v6 nissan navara 2000 model

2000 navara v6 petrol

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 178 Answers

SOURCE: Fuel Filter for Renault Laguna 2, year 2003, petrol 1.6

hello best way trace your fuel line from under the hood most likely its mounted under the car on your frame rail towards the rear of the car pass side goodluck please rate

Posted on Oct 02, 2008

Ad
old marine
  • 1992 Answers

SOURCE: Nissan navara 1986 2.4L petrol timing problem

For timing, on 1981 and later 4 cyl engines (from the Haynes manual):
1. Turn camshaft so both valves for #1 cylinder are closed, and turn the crankshaft so #1 piston is at top dead center (woodruff key should be pointing up).
2. Engage the camshaft sprocket (with stamped numbers facing out) into the timing chain, and install the chain around the crankshaft sprocket. The bright links on the chain should be aligned with the timing mark on the crankshaft sprocket (on the right side as you look at it) and with the number "2" stamped into the camshaft sprocket, which should also be on the right side as you look at it.
3. Install the camshaft sprocket onto the camshaft, aligning the camshaft dowel pin with the number "2" hole near the center of the sprocket.

For the firing order and wiring routing for the 8 plug 4 cylinder engine: (Plugs on the intake manifold side are coded "I", and on the exhaust manifold side are coded "E")

Wire to 1I should be connected to tower on the distributor facing directly to the front of the vehicle. Going counterclockwise from there, the order is (1I), 2E, 3I, 1E, 4I, 3E, 2I, and 4E.

Posted on Dec 12, 2008

old marine
  • 1992 Answers

SOURCE: Nissan navara 1986 2.4L petrol timing problem

For timing, on 1981 and later 4 cyl engines (from the Haynes manual):
1. Turn camshaft so both valves for #1 cylinder are closed, and turn the crankshaft so #1 piston is at top dead center (woodruff key should be pointing up).
2. Engage the camshaft sprocket (with stamped numbers facing out) into the timing chain, and install the chain around the crankshaft sprocket. The bright links on the chain should be aligned with the timing mark on the crankshaft sprocket (on the right side as you look at it) and with the number "2" stamped into the camshaft sprocket, which should also be on the right side as you look at it.
3. Install the camshaft sprocket onto the camshaft, aligning the camshaft dowel pin with the number "2" hole near the center of the sprocket.

For the firing order and wiring routing for the 8 plug 4 cylinder engine: (Plugs on the intake manifold side are coded "I", and on the exhaust manifold side are coded "E")

Wire to 1I should be connected to tower on the distributor facing directly to the front of the vehicle. Going counterclockwise from there, the order is (1I), 2E, 3I, 1E, 4I, 3E, 2I, and 4E.

Posted on Jan 09, 2009

localwonder
  • 6784 Answers

SOURCE: where is fuel pump at Nissan navara pic up year

Fuel pump is usually located inside the fuel tank.

Posted on Jun 05, 2009

  • 1 Answer

SOURCE: Fuel Filter for Renault Laguna 2, year 2003, petrol 1.6

The fuel filter is in the petrol tank. You will have to drop the tank to remove the old filter. Make sure the tank is empty as it is plastic so you need to have it as light as possible.

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan navara d40 v6 4.0 petrol. Makes noise when i start the car for few seconds ? What it can be ? Thanks


a description of the noise may have helped in the diagnosis, but generally if it is like a tappet noise, and goes with in 30 seconds of starting, it may be the hydraulic followers filling up.
If it is a roaring noise like a wind force ,it may be the viscous fan hub working until the silicon fluid is pumped into the hub reservoir

Feb 25, 2015 | Nissan Cars & Trucks

1 Answer

How to bleed air from my fuel line on 2003 nissan navara 3.3 v6 petrol? also how to test my fuel pump to see if its working properly?


It is not necessary to bleed air in your system as the fuel flow through the lines will pass the air back to the tank. have a fuel pressure test done on the fuel manifold and it will check fuel pump/ filter and fuel pressure regulator.

Sep 22, 2013 | Nissan Cars & Trucks

1 Answer

CYLINDER HEAD BOLTS TORQUE SETTINGS FOR NAVARA


If YD25 diesel then 39NM +90deg +90deg, slacken and redo same in 6stages

If 4L petrol V6 then 48NM, 98NM, slacken off then 39NM +90deg +90deg in 5 stages.

Apr 09, 2013 | Nissan Navara Cars & Trucks

1 Answer

Im needing the torgue settings of the cylinder head bolts and big end bearings for a Nissan Navara 4.0 V6 Petrol engine..


Hi mate,

I did forget to tell you to ensure that you turn the connecting rod bolts a further 90 degrees after the first setting.

Thanks

Jason

Jul 14, 2010 | Nissan Pathfinder Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...