Question about Nissan Cars & Trucks

Open Question

Nissan bluebird tail lights not working

Brake, reverse & fog light work. tail light bulbs ok

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stormbrewin
  • 426 Answers

SOURCE: 1991 volvo tail lights

Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Posted on Oct 20, 2008

dr_greg
  • 192 Answers

SOURCE: Both 2005 Honda Odyssey brake lights don't work.

make sure u have put the right bulbs in. rear brake lamps are dual filament....

Posted on Apr 15, 2009

  • 383 Answers

SOURCE: 2005 Nissan Maxima SE Fog light replacement

jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......

Posted on Apr 18, 2009

honeymokey
  • 3113 Answers

SOURCE: brake lights suddenly do not

Brake light switch would be next.

Posted on May 10, 2009

  • 718 Answers

SOURCE: tail lights and reverse lights out.

Check the bulbs for the tail/brake lights. If you put in single filament bulbs it will be on from the tail light voltage and the brakes will not show.
Try this;
Turn off the lights, press the brake pedal. Look at the brightness of the brake lights.
Now turn on the lights. Look at the brightness of the lights. If is the same as before the bulbs are wrong. You need two filament bulb.

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2004 rover 25 1.4, this morning tail lights and number plate light not working, reverse, fog and brake lights all fine, advise pleas?


Brake light? Some bad connections to light sockets if bulbs not burned out. Of course you will need help to see brake light when brake is pushed.

Mar 08, 2015 | 2004 Rover 25 1.4

1 Answer

Tail light 10 amp fuse blows. No tail lights. Brake and turn signal lights work ok


Take the bulbs out and check them, replace any that look black or if the filaments don't look good

Sep 27, 2014 | 2000 Nissan Frontier

1 Answer

How do you switch on the rear fog lights on a 2004 jeep cherokee uk model . The front fog lights work. Should the rear fogs come on when you switch on the front fogs or is there a seperate switch...


Try and see what happens when you put it in REVERSE? There are many American Vehicles that the light only works when you are in Reverse to see what is behind you

Apr 08, 2013 | Cars & Trucks

1 Answer

How do I change a brake light bulb in a 1999 c70 volvo?


Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician

Jan 27, 2011 | 1999 Volvo C70

2 Answers

2000 Nissan Maxima. Headlights work but tail lights won't come on. How do you fix the wiring of this?I have changed the bulbs and nothing. The brake, reverse, and turn signal lights work, so the bulbs...


tail lights work on a different filament than the rest of the lights you mentioned, it is possible both bulbs are burned out for that filament. if not, check the fuses as the tail light circuit in some cars is on a seperate fuse. the remaining possibility could be bad socket contacts.

Nov 15, 2009 | 2000 Nissan Maxima

1 Answer

Rear brake lights


they may be dual element bulbs. the element used for the tail lights is ok but the brake light element is burnt. change both bulbs.

Jun 24, 2009 | 1989 Nissan Stanza

2 Answers

1991 volvo tail lights


Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Oct 20, 2008 | 1991 Volvo 240

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...