Question about 2002 Buick Rendezvous

Open Question

Buick rendezvous rack and pinion replacement - 2002 Buick Rendezvous

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 59 Answers

SOURCE: need to see a picture of rack-in-pinion for 1997

I have a 2000 Buick Centruy. What are you exactly looking for in relation to the rack? Maybe I can walk you through what you need to know.

Posted on Sep 01, 2009

  • 296 Answers

SOURCE: What wrench or crows foot and extensions do I use

Wherever you can, you should use a tubing wrench, whether it is a crow's foot tubing wrench, or just a normal style wrench with a tubing wrench end.

Those fittings are tight, an you have no options left if you damage the fitting.

As far as what to use, it is always a game of Legos as you try to gain sufficient access with enough oomph to do the job. Use open en wrenches to find what the size is, then use what you learn from that to get the same sized tubing wrench.

If you are removing the hose, and you do not intend to use it again, it can really make things easier to cut the metal line close, then use a socket...

Posted on Jun 15, 2010

  • 1 Answer

SOURCE: Replace fuel pump on 2003 Buick Rendzvous

What parts are needed to replace the fuel pump on a 2003 buick rendzvous?

Posted on Sep 28, 2010

  • 85 Answers

SOURCE: The steering in my 98 Buick Century is hard to

Your PS pump is fine.

This vehicle has:

Variable-assist power steering: A power steering system that uses valves and speed sensors to vary the amount of steering assist according to engine or road speed. At slow speeds more steering assist is delivered and steering the wheels is easier; necessary for parking, etc.. At higher speeds, steering assist is reduced and more steering effort is required to steer the car, giving the driver greater feel of the road. Also known as Speed-sensitive power steering.

Loss of current to the magnetic coils would cause a loss of power assist at low speed. Coil resistance can be checked with an ohmmeter, and should read about two ohms. An infinite (open) reading indicates a bad coil (requires replacing the rack since the coils are not serviceable). Checking for shorts between both sides of the coil assembly and rack housing is also recommended.

Best wishes

Posted on Jan 01, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rack and pinion removal

remove the left and right tie rod ends from the from the pivot arms , remove power steering oil lines, remove steering wheel shaft to rack pinion clamp, with wheels in straight ahead position remove rack hold down fittings, slide pinion off steering shaft and remove rack.

Jul 10, 2015 | 2002 Buick Rendezvous

1 Answer

Fix power steering leak

You need to determine where the leak is originating. The possbilities are:

1. Leaking from the power steering pump.
2. Leaking from the high pressure hose at the steering rack
3. Leaking from the return hose at the steering rack
4. Leaking from the steering rack boot(s).

Once you find the leak source, replace that component.

Dec 12, 2013 | 2002 Buick Rendezvous

1 Answer

How to remove rack and pinion from 99 chrysler lhs

There are few help links showing exact accurate procedure to replace Rack and Pinion. Click the link below and follow the procedure:-----
Pinion Seal Replace on Dodge Dakota?


How to Replace a Rear Pinion Seal.

How to replace Power steering rack and pinion gear on Chevy Silverado 2500 HD?

How to replace Power Rack and Pinion Steering Gear on Acura Car Models?

How to replace power rack and pinion steering gear on Toyota cruiser?


How to replace Power Rack and Pinion Steering Gear on Acura Car Models?

Front Drive Pinion Seal Removal on Ford Explorer?

How to Replace Driveshaft, Pinion Flange & Seal?


How to Replace Power Rack & Pinion Steering Gear On 2007 Ford Taurus?

How to Remove Power Rack & Pinion Steering Gear on Ford Windstar?


Power Rack & Pinion Steering Gear replacing details for Buick Park Avenue and Pontiac Bonneville


How to Replace Power Rack & Pinion Steering Gear on Mercedes Benz Truck?

How to replace Power Rack & Pinion Steering Gear on Toyota 4Runner?


Power Rack & Pinion Steering Gear Replacing on Toyota Land Cruiser & Sequoia?

Power Rack & Pinion Steering Gear Removal on Toyota RAV4?

How to Replace Power Rack & Pinion Steering Gear on Toyota Sienna?

These details will help.

Nov 23, 2012 | Cars & Trucks

1 Answer

My 200 buick lesabre is extremely hard to turn to the left; turning to the right is normal. Any suggestions as what it could be?

A stuck valve in the steering rack. Try adding Lucas power steering stabilizer to the pump. Drive it for a week and see if it gets better. If it doesn't you will have to replace the rack and pinion.

Feb 13, 2011 | Buick LeSabre Cars & Trucks

3 Answers

In my 2005 V6 Buick Rendezvous, the power steering has gradually gotten worse over past weeks. If I rev up the engine it steers fine. Going at higher speeds it is fine, but at low speeds I can barely turn...

6 weeks is less than 90 days so you should have a warranty for a different pump.

Remember to use the correct fluid for the car. If you have rack and pinion steering it can be a different problem besides the pump.

Get a front end alignment so they can check the balljoints which contribute to your problem.

Sep 25, 2009 | 2005 Buick Rendezvous

1 Answer

Need to see a picture of rack-in-pinion for 1997 buick century

I have a 2000 Buick Centruy. What are you exactly looking for in relation to the rack? Maybe I can walk you through what you need to know.

Sep 01, 2009 | 1997 Buick Century

2 Answers

Power steering

Support front wheels off ground. Chock rear tires, get an assistant for safty. Start engine (do not put in gear) step outside of car and manually turn wheels left and right by hand. Cut off engine. Turn key back to release steering lock. Manually turn wheels by hand again. If it requires the same ammount of strength to turn wheels, then Rack and Pinion is bypassing internally. Solution... replace rack & pinion.

Jul 02, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
2002 Buick Rendezvous Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides