Question about Mercury Sable

Open Question

2002 mercury sable radiator removal

How do you remove radiator

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76846 Answers

SOURCE: how to remove 2002 ford taurus radiator

Remove the rad support cover, remove the electric cooling fan and shroud, disconnect the tranny cooler lines, drain the cooling system, remove the upper and lower hoses, remove the rad brackets on top of the rad (one on each side), have someone hold the AC core out of the way and carefully slide the radiator up and out

Posted on Nov 24, 2008

Ad
  • 1165 Answers

SOURCE: Steps to remove radiator in 2002 Ford Escape?

http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?leftNavPage=productsHowTo&partCode=0900c15280213faa&title=Radiator&targetPage=productInformation
Try this web site. It takes you to Auto Zone "How To" site. This one covers the 4 cylinder as you did not indicate the engine size.

Good luck and hope this helps.

Posted on Apr 20, 2009

  • 11 Answers

SOURCE: mercury sable 2002 serpentine belt change

There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.

Posted on May 02, 2009

carlsbiz
  • 1124 Answers

SOURCE: 2002 sable radiator overheating

It can be added to th overflow tank..
Do NOT open the radiator cap whaile hot..

When fluid s put into the overflow tank - it can be a bit slow going into the radiator..

Good luck !!

Posted on Jul 13, 2009

  • 1 Answer

SOURCE: Remove the right rear door panel in a Mercury Sable

Removed two screws from the perimeter of the door, one in the back edge and the other under the bottom. Remove one screw from the handle cup where the window switch is located. Placed some tape around the edge of the handle cup for protection against scratches and pried the cup out with a small putty knife. It is hard, but will pop out. Next I taped the paint around the door panel and used a flat bar to reach behind the panel and had enough of a gap to see the orange tabs and pried each one to remove the panel completely. The panel does not need to be lifted up to removed, just pull it straight off the door. A few tabs may still be holding, but will pop off with a bit of pressure.

Posted on Oct 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lower radiator hose


None. Open the petcock on the radiator to drain the cooling system into a drain pan. Close the petcock, remove the clamps that hold the lower radiator hose to the radiator and the water pump. Remove the hose, install the new one, install the clamps, fill the cooling system, and you're done. With the radiator cap off, run the vehicle with the heat on until the engine gets up to operating temperature, allowing the thermostat to open, to allow you to be able to completely fill the system. Install the cap and you are done.

Oct 07, 2012 | 2002 Mercury Sable

1 Answer

Need to drain radiator in 1999 Mercury Sable & add stop leak


There is a drain **** on the driver's side on the bottom of the radiator. It is hard to reach and hard to see. You'll probably need to remove the black cover under the radiator and bumper to get to it.

Nov 02, 2010 | 1999 Mercury Sable

1 Answer

2002 mercury sable insert key turn on all lights on dash light up but car does not turn over. Turn key off remove wait a cple minutes try again starts right up.


Might have key problem.If key has chip it isn't recognized first time. When you remove key and insert it again you get right recognition.That recognition is part of the anti theft stuff.

Mar 19, 2010 | 2002 Mercury Sable

1 Answer

After opening the hood, how do I begin to remove the radiator on an '02 mercury sable 3.1L V6?


This is a pretty big quesion for FixYa.com ... Here are the hi lights: Drain the radiator. You will have to dispose of the coolant, a hazardous waste. Disconnect the transmission cooler - be prepared to catch the fluid that will come out. Disconnect the upper and lower hoses. Be prepared to replace these hoses and hose clamps. Remove the electric wires and fans, if any. Remove anything else that may block the radiator from coming out. Unbolt the radiator and remove it. You will find a bolt at each corner. You will need a small collection of the proper size wrenches and/or sockets and a screw driver or nut driver and pliers. You may need a box knife to cut the hoses for removal.

To install, reverse the process. You will have to replace the coolant - should flush your engine before you start this project. Get 'engine flush' at the auto parts store. Remember to check all fluid levels when you are done. Do not overfill the transmission.

This is not a job for the unexperienced.

Mar 10, 2010 | 2002 Mercury Sable

1 Answer

How do you replace rear brake light bulbs on a 2002 Mercury Sable?


open the trunk and remove the inner liner behind the break light lenses and remove the 6 bolts that hold the lense in place

Jan 18, 2010 | 2002 Mercury Sable

1 Answer

Remove the right rear door panel in a Mercury Sable


Removed two screws from the perimeter of the door, one in the back edge and the other under the bottom. Remove one screw from the handle cup where the window switch is located. Placed some tape around the edge of the handle cup for protection against scratches and pried the cup out with a small putty knife. It is hard, but will pop out. Next I taped the paint around the door panel and used a flat bar to reach behind the panel and had enough of a gap to see the orange tabs and pried each one to remove the panel completely. The panel does not need to be lifted up to removed, just pull it straight off the door. A few tabs may still be holding, but will pop off with a bit of pressure.

Oct 06, 2009 | 2002 Mercury Sable

1 Answer

2002 sable radiator overheating


It can be added to th overflow tank..
Do NOT open the radiator cap whaile hot..

When fluid s put into the overflow tank - it can be a bit slow going into the radiator..

Good luck !!

Jul 13, 2009 | 2002 Mercury Sable

3 Answers

Mercury sable 2002 serpentine belt change


There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.

May 01, 2009 | 2002 Mercury Sable

1 Answer

2002 mercury sable


The blend door that regulates the airflow over the heater core may be stuck in the AC position. It is inside the case and is most difficult to get to. There may be a YouTube video that may help you locate it and test it.

Sep 14, 2017 | 2002 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...