Question about 1987 Ford F 350

1 Answer

I have an 87 f350 with a 460 motor i want to swap the cab from a 1993 f150 with an inline six cyl how do i wire the coil, and starter up ??

Both cabs are standard, 93 is fuel injected the 87 is carbureted with electronic ignition

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 444 Answers

Your going to run into more hurdles than just the starter and coil.however the starter you can wire the cellinoid to the ignition and just run a power lead to your battery. the coil you can easily run to a standalone ignition system such as an msd or mallory setup. you may want to look into a painless wireing harness, you can find them online, they can make you anything you need and it will be a plug and play setup, no head scratching needed. and the underhood will look clean rather than a rats nest of unused wires and random wires running here and there.

Posted on Feb 12, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Ford F150 300 Inline 6 Cylinder just goes Click when i turn the Ingnition


if solenoid is clicking may mean its working and problem is dead spot in starter ---but test and check them with a meter

Jun 13, 2017 | 1996 Ford F150 Regular Cab

1 Answer

1996 Ford 150 XLT F150 4.9 6 cyl 300


You will need to determine if you are lacking spark or fuel when the engine is warmed up and fails to start. It could be the coil, ignition module, a relay, or various other components.

Mar 13, 2014 | 1996 Ford F150 Regular Cab

1 Answer

1997 f150 cylinder 6 misfire


Could be the injector on number six needs cleaning,to check injector,remove and swap with another cylinder and see if problem followed injector.

Jan 06, 2013 | 1997 Ford F150 Regular Cab

2 Answers

Nothing happens when turn key. 1984 ford f150 inline 6


Check the small wires to the starter relay for power when the key is turned to start. The small wires activate the relay. If the small wires have power, most likely the relay is bad.

You can bypass the relay with heavy jumpers. Make sure stickshift is in neutral or Park if its an automatic. If starter turns good with jumper, relay is bad.

Aug 22, 2012 | Ford Cars & Trucks

1 Answer

2.5 cranks ,has no spark


Check the fuse and relay in the fuse panel for a blown fuse. Then unplug the power wire to coil and test for power to coil. If you are getting power to coil then it will be the coil causing the problem. Use an inline tester to connect between the coil tower and sparkplug wire to correctly see if the coil is putting out fire. Could be bad sparkplug wires or plugs. Hope this will help you.

May 31, 2010 | 1994 Dodge Dakota Club Cab

1 Answer

Need firing order diagram 1985 F150 inline six


Easyer to explain then it is to get a diagram. Standing facing your truck cylinders are numbered 1 to 6. The front most cylinder being one and the back one closest to the cab is 6. The blackened terminal on the distributor cap indicates the number one spark plug wire position. In clockwise order from the blackened terminal firing order is 1-5-3-6-2-4.

Dec 22, 2009 | 1985 Ford F150

1 Answer

I need the torque specs for a ford 300 inline 6


Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs.
That should be fine for the 6 cylinder flywheel.

Oct 08, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Distrbutor cap 1995 f-150


In a clockwise rotation the wire closest to the engine is cyl.3, then 6,2,4,1,5

Feb 06, 2009 | 1995 Ford F150 Styleside Regular Cab

2 Answers

1998 ford motor swap 8cyl to a six inline


Unfortunately, You will need to Change it all. None of the V8 Components will Transfer to the Inline 6. Please Rate My Response! Thanks!

Feb 02, 2009 | 1998 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...