Question about Cars & Trucks

Open Question

REPLACING VALVE COVER GASKETS ON A 1999 PLYMOUTH VOYAGER

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 109 Answers

SOURCE: replace valve cover gaskets on subaru svx

I don't have experience with this engine but guess you won't have to remove it for valve cover gasket work but perhaps can lift it a bit [not by hand!] after loosening engine mounts.

Posted on Nov 18, 2008

  • 1861 Answers

SOURCE: 1997 Camry Valve Cover Gasket Replacement

Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.

Posted on Dec 15, 2008

  • 634 Answers

SOURCE: difficulty in replacing v6 valve cover gaskets

at auto store they sell gasket adhesive or use a little silicon and clean cover til oiless ( use break cleaner) and glue gaskets in place and let dry and then install

Posted on Jul 08, 2009

  • 4088 Answers

SOURCE: R&R Starter 1999 Plymouth Voyager w/3.3 V6

The likely problem is the contacts in the solenoid on the side of the starter. Does the solenoid click when trying to start the car? Disconnect one battery cable before doing anything with it. I fixed mine by removing the end of the solenoid case and building up the badly eroded input terminal bolt head with silver solder--worked great. You have to work under the car to get to these parts--use jack stands for safety.

Posted on Jul 16, 2009

  • 323 Answers

SOURCE: 1999 Chrysler Sebring Coupe 2.5 oil in spark plug

It is possible the tubes are leaking at the bottom but highly unlikely. There is next to 0 oil pressure in that area so the tubes would actually drain if leaking. I would start with the tube seals and gaskets as you have already planned and check it again later down the road like at the next oil change interval. You're on the right track for the repair, just be patient with the intake plenum and you'll do fine.

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Change a valve cover gasket on a 1998 voyager plymoth mini van


unbolt the cover and clean all gasket surfaces and replace gasket and cover and bolts

May 16, 2015 | 1998 Plymouth Voyager

1 Answer

Oil leaking around the semi cicular plug


i`m guessing you have a 3.0litre motor and are talking about the ones on the head wear the valve covers sit on.these you get when you buy valve cover gaskets for the car.they come with them in the set.or you can remove the valve covers then the semi cicular plugs you can try to put a coating of silcone sealer on the plugs and the valve cover gasket to reseal them.

Nov 09, 2011 | 1993 Plymouth Voyager

1 Answer

1999 Plymouth Voyager engine compartment fuse/realy diagram


I have to assume you have lost the cover for it, as the schematic/Map, is on the underside of it.

May 24, 2010 | 1999 Plymouth Grand Voyager

2 Answers

How to change the back three spark plugs on a 99 grand voyager


it is easier from under neigh,,,or universal & strait extensions,,either way is hard,,,

May 08, 2010 | 1999 Plymouth Grand Voyager

1 Answer

Oil leak


You should replace the valve cover gaskets.. Get them at a local auto parts store..

Also I would suggest getting a Chilton Book or a similar book for your year make and model.. It had pic diagrams and step by step instructions for replacing most things..
They can be found at most auto part stores or online..

Have a great day !

Apr 09, 2010 | 1993 Plymouth Sundance

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...