Question about 1996 Plymouth Breeze

1 Answer

My 96 breeze that just got a new starter and still won't start

Just replaced timing belt and a few other things. The car was hard to start yesterday and now the starter won't even engage.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Posted on Feb 25, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 51 Answers

SOURCE: serpentine belt on 96 breeze 2.4L

you can get step by step instructions from a chilton manual. i go to the library, and copy the page or pages i need. libraries have every chilton auto manuals. may have to rent a specialty tool for belt tensioner pulley. can be rented at any parts store, money is returned when tool is. usually 20 bucks. put tool on tension pulley, pull to loosen belt tension, with other hand slip belt off of alternator or easiest pulley to get to. before you take belt off take a mental picture of belt route. when installing new belt remember if pulley is smooth it contacts smooth side of belt.

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 ford ranger turn over hard starts some time


Have you tried taking the serpentine belt off ? You could have a stuck pulley or accessory keeping the crank from turning.
Could be something with the transmission too.

Jun 21, 2013 | Cars & Trucks

1 Answer

Honda Accord keeps blowing fuse and won't start


Recently we had to put a new fuse in the starter ???????????? What fuse ? location , size . A fuse blowing means a electrical short to ground .

May 29, 2017 | 1998 Honda Accord

1 Answer

96 blazer.4.3 ltr 4x4.new crank sensor.new fuel filter.new coil.got fuel and spark.still won't start


How about the fuel pump...are you getting the fuel to the cylinders? Is the fuel making it through the fuel line through the fuel filter? Drop a few drops in 1 cylinder, if it fires, you have a fuel problem. Does it turn over? If not check out the motor starter!

Dec 31, 2012 | 1996 Chevrolet Blazer

1 Answer

My Nissan maxima won't start on the first try


Could be several things that caused car won't start, inculding starter, ignition, dirty or loose battery connections.
Honda Diagnostic Tool

Jul 09, 2012 | 1998 Nissan Maxima

1 Answer

Car randomly won't start


first thing to do is to add a relay in your starter. relay should be connected to the solenoid of your starter then giving it addition amperes to let the starter motor running.

if adding a relay does not do the trick. replace the carbons bushings in your starter.

another problem should be your ignition timing. if you are experiencing hard starting only when the engine is hot, then your ignition timing is overly advanced.

May 17, 2012 | 2003 Nissan Altima

1 Answer

I have a 96 Chevy Corsica and it won't start.... I


If you have a healthy spark (a blue snapping spark), it would not be a problem in the ignition system or the module. An orange, weak, or intermittent spark could point to trouble in the ignition.
I would check the timing on it, maybe it is a timing chain problem. It should have fired and ran a bit with the starter fluid. The fact that it didn't, even with a good spark, well, probably needs a little shop time investigating. Jumped timing from a worn chain? Low compression in one or more cylinders? A couple of things you need to consider.
Good luck.

Mar 31, 2012 | 1996 Chevrolet Corsica

1 Answer

I have a 1998 Plymouth breeze that won't start.


Hello! I would suggest having a look at the Brown wire that connects to the starter solenoid...It may be touching chassis ground...Also check the Large Red lead that attaches to the starter...One or both are touching chassis ground...If the Red lead is against ground it will not blow a fuse, in that it is connected directly to battery...And give the systoms that you have...Guru...saailer

Feb 13, 2012 | 1998 Plymouth Breeze

1 Answer

My 96 crown vic police interceptor, cranks won't start without spraying starter fluid.. the car won't start without spraying starter fluid into air intake hose to carb...


starting fluid is a thing of the past. dont use it. this car doesnt have a carb, its a throttle body/ electronic fuel injection system. you most likely have a fuel pump or fuel pressure regulator issue. test the fuel pressure, should be anywheres from 35-50 psi

Oct 11, 2011 | 1996 Ford Crown Victoria

1 Answer

96 gmc sierra 5.7 starter battery good. Starter clicks but won't catch. The starter has been operating slowly but usually the engine caught. Starts with a jump but the starter sounds like a 6 volt...


  • Check your starter with a multimeter for 12v reading
  • Check quality of Power cords, spark plugs cables, choke.
  • Check whether the drive belt or starter belt is loose.
  • Switched ON A\c can cause this due to a faulty stuck compressor!!

Sep 23, 2011 | 1997 GMC Sierra

Not finding what you are looking for?
1996 Plymouth Breeze Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...